Leon have you shared that preset on the axe exchanged. i would liketo try it if is available cheers. Thanks for the video. Helps understand this FW release
Thanks Leon! How do you remove a control from the global perform area? Can’t find this answer anywhere and right clicking doesn’t give you an option to delete it.
I have another question haha, sorry....i did try to resaerch this so I wouldnt have to bug you, but couldnt really find anything....On the output block there are a left and right meter, that im guessing reads the "output" of the signal. Do you want to keep the meter from going into the red here? I just noticed this....I just got an FM3 a couple days ago, so im still getting aquainted with it. Ive used your channel for so much info man, you have no idea haha. Thanks for putting out all the sweet content tho man, for real!
not directly, but a workaround would be to assign the "Manual" modifiers to your desired parameters, set the modifier range, and then map the manual modifiers to the perform page.
Any chance you could do a more in depth video on how to set up the fm3 with the airstep, I know you did a short one, that's why I bought one 😁 but I'm not exactly sure how to get it connected and programed to work with the fm3, keep up the great work man, I've learned so much from your videos. 🤘😁🤘
Hi there Leon, I hope you are doing well, thanks very much for taking the time to make this video, great info here I have an FM3 with a Matrix power amp which I really love but I feel that I get more headroom when I connect it into the fx return of any of my amps, of course, I switch on/off the amp modeling accordingly as well as set the speaker resonance as you have previously shown with the AXE FX 3, I just wondering if you have any tip or advice to make the FM3 to sound with a similar headroom than a tube power amp using a Solid state power amp like matrix gtx800? I'd be great to see a vid on it if you get the time.
I’ve been an AxFx 2 user for years now, I miss all the firmware update fun so I finally broke down and purchased an FM3, my presets are usually really basic volume, amp, cab, EQ, reverb and delay so the Axf3 would really have been overkill. Should be delivered next week can’t wait 😛
Hi, love your channel. Thank you! Question - I already have an FX8, but I want the FM3 as well. Would I be able to use the FX8 as a master and the FM3 as a slave? Seeing that I have many more switches on the FX8? Thanks again buddy!!
Is your Live sound Preset available in The exchange Database from Fractal Audio ? Sounds very heavy. Does it Sound only that way with a Guitar tuned in Drop C or Does it sound in Standard Tuning that way as well ?
Yes, it's here - axechange.fractalaudio.com/detail.php?preset=8628 It's dialled in for for my guitar in Drop C, so play around with the B/M/T controls to fine tune it for your guitar
I totally dig people who dig guitars and Fractal Audio and cats! Thanks for all the information too! :D
:D
Thank you Leon, you once again helped me lift the heavy cloud!!!
Thank you Brother Leon! Stay Excellent my friend!
Performance pages look great! I need to check out the bias excursion updates as well to see how noticeable it is. Great quickie on the beta 👍
Need the help of a fractal nerd with the Axe 3 please
Thanks Leon, you are the best
Aloha. From Hawaii, Leon! Love your channel. My FM3 arrives on Monday.
Congrats! One day i'll get to go to hawaii :D
@@LeonTodd 7
@@LeonTodd 7z8zf8z8z
@@LeonTodd 7zsg
@@LeonTodd 7zgdzzd8dzfz
Great stuff, Leon. Thanks!
Instant like for cat content! Have a great weekend, Leon!
Leon
have you shared that preset on the axe exchanged. i would liketo try it if is available cheers. Thanks for the video. Helps understand this FW release
Sweet I just got my FM3 a few days ago .
Thanks Leon! How do you remove a control from the global perform area? Can’t find this answer anywhere and right clicking doesn’t give you an option to delete it.
Such a tasty lead player Leon, love it;-))
Can the delay repeats spill over when changing to a scene w/o delay?
How do you come up with licks like at 5:30 ?
how can I get your presets?
I have another question haha, sorry....i did try to resaerch this so I wouldnt have to bug you, but couldnt really find anything....On the output block there are a left and right meter, that im guessing reads the "output" of the signal. Do you want to keep the meter from going into the red here? I just noticed this....I just got an FM3 a couple days ago, so im still getting aquainted with it. Ive used your channel for so much info man, you have no idea haha. Thanks for putting out all the sweet content tho man, for real!
How do have your input pad set? I noticed it stays in the red even when playing single note lines. Thanks.
Is it possible to set the ranges for the knobs that are on the performance page?
not directly, but a workaround would be to assign the "Manual" modifiers to your desired parameters, set the modifier range, and then map the manual modifiers to the perform page.
Any chance you could do a more in depth video on how to set up the fm3 with the airstep, I know you did a short one, that's why I bought one 😁 but I'm not exactly sure how to get it connected and programed to work with the fm3, keep up the great work man, I've learned so much from your videos. 🤘😁🤘
Hi there Leon,
I hope you are doing well, thanks very much for taking the time to make this video, great info here
I have an FM3 with a Matrix power amp which I really love but I feel that I get more headroom when I connect it into the fx return of any of my amps, of course, I switch on/off the amp modeling accordingly as well as set the speaker resonance as you have previously shown with the AXE FX 3, I just wondering if you have any tip or advice to make the FM3 to sound with a similar headroom than a tube power amp using a Solid state power amp like matrix gtx800?
I'd be great to see a vid on it if you get the time.
I’ve been an AxFx 2 user for years now, I miss all the firmware update fun so I finally broke down and purchased an FM3, my presets are usually really basic volume, amp, cab, EQ, reverb and delay so the Axf3 would really have been overkill. Should be delivered next week can’t wait 😛
Keep me posted with how you like it!
Kick asss tone
@Leon, awesome demo! 🔥Is your lead tone preset available for downloading?
? do you have this Preset ?
Is the new firmware available now. I already have 3.0 but can't find the New firmware
SINCE I don't have an fm3. I just came to hear you jam and see the kitty. Pet him or her for me. 🤣🤟💖
Hi! I have a question, in the FM3 can I pulse one switch and activate two switchs? Like it is a shortcut. Regards from Argentina!
Nice cat! Siberian? Respect from Russian guitar fans 🤘
Leon what are those foot switch covers?
Hi, love your channel. Thank you! Question - I already have an FX8, but I want the FM3 as well. Would I be able to use the FX8 as a master and the FM3 as a slave? Seeing that I have many more switches on the FX8? Thanks again buddy!!
Being an FM3 authority I thought you may have an answer....can thr FM3 play ultra res impulse responses? I heard it cannot which seems bizarre to me
it's slated for addition in the future but not there atm. I honestly can't tell the difference the way I use mine anyway.
I'm watching this as soon as I wake up, how early do you upload these videos? haha
Beeeta release. 😁 So you still have a kitty? Sounds on fire! 🔥
Leon, does this mean you don't need your custom built 3 potentiometer box anymore?
This the same live preset that’s on axechange??
Should be!
Edit - try this one instead axechange.fractalaudio.com/detail.php?preset=8628
@@LeonTodd cool thanks
Is your Live sound Preset available in The exchange Database from Fractal Audio ? Sounds very heavy. Does it Sound only that way with a Guitar tuned in Drop C or Does it sound in Standard Tuning that way as well ?
Yes, it's here - axechange.fractalaudio.com/detail.php?preset=8628
It's dialled in for for my guitar in Drop C, so play around with the B/M/T controls to fine tune it for your guitar
@@LeonTodd thanks.
Leon Todd nunca usa pedales Wha-Wha, utiliza pedales Mia-Mia
Nice work Leon. But you know Scottie will be annoying you once again asking for more advice/IR for his FM3 hahha
23rd!
1st! 😀