I'm so glad ur so happy after awhile.Glad to see the real Ed show.Its been awhile.When ur happy and excited it brings me joy to build my own dream setup.
@@shaye170 He made a video on it a little bit ago. Basically, he had some problems in his house, and him and his wife caught covid, so they were worried because they didn't want to spread it to their daughter. He also had some other health issues, I believe.
Just letting you know, DO NOT paint the cones on your kefs. They are aluminum drivers, when drivers are made of a soft material you can dye them but with aluminum you will affect sound quality. If i were you if it really bothers you, you could reach out to kef. They make the LS50s in various finishes as well as have different coloured drivers depending on finish. Just order new drivers from kef in your desired finish.
I could tell from the start that this was going to be a Monster of a build! This is amazing, I wish you all the best with your channel, you deserved it.
Ed, little tip when finding the studs... the outlet will always be attached to a stud, so there's one right there for sure, and the rest will be every 16" (on center) from there also.
Moisture meter is used in case of flooding situations. You can use it to determine the areas where water damage took place in your sheet rock and studs. This is helpful so you don't replace/repair more than what was damaged by the water spill.
Hey Edgar, I love the excitement behind the speaker upgrade! The 8k resolution comparison had me grinning because I can remember what it was like discovering the difference in audio clarity when I upgraded my recording studio speakers. Regarding painting the copper center of the speaker diaphragm, as long as the material is a hard surface (actual metal) you should be okay. Just keep in mind that paint will add some weight to the cone which means the magnetic driver system will have to work harder to move the cone in and out to produce the sound you want to hear. This may result in some high frequency loss, and since this is not the tweeter, it may affect the upper mid-range where the crossover happens between the the main driver produces and the frequencies the tweeter produces. The only way to measure this accurately would be to use a frequency analyzer tool to show a graph. Set up a microphone in the sweet spot (where your head would be when you sit in front of them) and play a “sine sweep” through the speakers. If you do this before and after the paint, you should be able to see the difference in response characteristic the paint adds to the diaphragm. This will likely be a minimal difference, and you’ll want to make sure you put the microphone in exactly the same spot for both tests. Also, using a measurement microphone (fairly inexpensive) will help the accuracy as well. Message me if you are curious about this and have questions! I’d be happy to help
Hey Tech! I'm happy to see you and your family doing well. I just moved into a house myself and I'm looking for ways to set up my very first gaming/video editing station. I'll be looking at your videos for ideas. I'll also appreciate any recommendations if you can. Thanks bro!
Hey Ed. Your videos are absolutely STUNNING and just ENTERTAINING. 🤩🔥 I'm very happy that what you long awaited for, which is of course your DREAM SETUP, has finally started and is on the process. Not lying, the best part for me was the whole video or should I say THE DREAM DESK SETUP JOURNEY, Until... I saw SHILOH. During your outro, what I mean is from 37:52 till the end, I pretty much did not pay attention to you or what you were saying, except when you were talking about your Custom Tech Source RGB Logo, and your acoustic panels as well, but other than, I had my eyes on SHILOH. She was in joy during the outro and it was the CUTEST thing I've ever seen on the Tech Channel. 🥰💐
Lookin like you taking a break from the gym my dude. I feel yah, I’ve been on an extended break myself. Fatherhood, family, and work will do that. Hoping to get back on it soon!
For the placement of your sff pc, you could attach it under your desk like Optimum Tech did (you can refer to one of his videos). The pc would be “invisible” from the front since it would be under the countertop, it would lead in better temps and less noise overall.
that intro was so refreshing, after seeing a few recent vids from ed having a depressing note, due to covid, and house moving, just seeing him start off the video with a smile made my day
Generally outlets are mounted to the side of a stud, then from there most studs are 16 inches apart from each other in new construction if anyone is having trouble finding them!
I cant even imagine what it will look like keep it up. Youve inspired me to upgrade from my integrated graphics laptop to a pc and good setup when I can, if i can. Great job ed.
As a music producer, glad to see ed upgrade those speakers. A lot of people miss this feature in their own setups and it's such a greatly missed opportunity for a far better user experience whether you're into making music, playing games or just watching video.
I had my old timber front door (1500mm wide x 2100mm high) professionally repurposed into a worktop (1700mm wide x 800mm deep) when we remodeled our house. The door had a lot of character. Then I had a piece of 6mm white (so you don't see the green shine through) safety glass cut (furniture specification) and placed it over the door. It looks incredible and having the old door in my study underneath my gaming setup ads a bit of nostalgia.
@7:21 dude I as a relatively handy guy with lots of experience moving heavy things, you need to secure the counter and if it is fragile wrap it in something like a painter’s blanket. So if I were you I would have wrapped the counter and used a few ratchet straps. I would also suggest looking up when lifting heavy things. As looking up gives you natural good lifting form. If you lift with your back you will damage it. If possible even if phoning a friend 2 people lifting something makes it so much easier. You also need to measure and make sure the object will fit before you try and jam it through a door. If it won’t fit one way you can also change it’s orientation. This isn’t supposed to be mean but there is a lot of room for improvement my man.
I’m so happy I found your channel I just want to say I love how you’re not selfish about the information you give us and you explain all the tools we need also the stuff to add into our gaming set up if it wasn’t for you I wouldn’t even known half the tools or what to do or start with building mines keep it up I love it ❤ new subscriber
Edgar, you should make friends with those construction workers. You could have asked some of them help you out bringing in the table. From my experience they don't tend to be jerks about helping out. Also it might be a plus for you with noise control. They might be able to work with you when you're recording and reduce noise.
Although I did like the video it was super hard to watch the moving the table into the house process. I feel like you made it harder on yourself then it needed to be. LOL Great video though! Love the content. You inspired me!
Ngl, personally i think the gold chrome accent on the speakers look amazing, and give just a touch of colour to your set up as it is literally just white which can get almost a bit boring to look at but all in all set up looks great so far.
@18:00 YOU HAVE A LASERLEVEL! That is level! Just measure down x inches from the laser level and mark the wall. Then attach the mounting hardware to the wall and put on the tabletop...
21:35 I'm always so thankful that our houses aren't built like that where I live, I don't even want to imagine how much of a pain it must be hanging up TVs and such things o.O
put the mini pc on the right hand side of your office, either on an end table or on the right side of the desk. Makes it easier to route the cables behind everything since the back of the PC will be facing the right direction.
hey man for the new speakers ( on a SE point of view ) , i dont reccomend painting them becuase that is the membrane, and it needs to vibrate so the paint will ruin the quality of the speaker. Even if it doesnt sound very diff, overtime it will and it will also ruin the warrenty haha. good video tho!
The one thing I wish I had right now is the nvidia broadcast option. It is a total game changer! I can't afford more than what i have right now. I have the gtx 980, even though I feel fortunate to have that because it does work great and allows me to play all my games, but one day I'll be able to upgrade and get to use nvidia broadcast. It makes a huge difference.
I think for the pc builds , If you put them above ,kind of like books on a bookshelf. It would look amazing. Sometimes a bit of asymmetry gives of a good esthetic look .
Can wait to see the final setup, I might "stole" some of your ideas as i'm about to create mine, setup wars wait for me 😜 Well about your table top, hmm... well i think it's way too expensive for what it is, i'm pretty sure any wood worker would make you a nice and solid one for half price. Especially that it is made in laminate... well not the choice I would have done, but i respect your, it's your money bro 😁
Setup Looking good Edgar! I'm really interested to see how you setup and wire your head board with all the wires and how how much space between the wall and the headboard. I personally rent so I could never spend the time an effort into my setup like this only for me to move a year or so later. But yours looking AMAZING! Keep it up!
Wow i was searching up setup videos for inspo for my new home and office, And i found you have the same exact model home as me and same office! What a small world lol
I'm so glad ur so happy after awhile.Glad to see the real Ed show.Its been awhile.When ur happy and excited it brings me joy to build my own dream setup.
Omg Shayla Is so cute lol.She wants to help you with ur setup.
When’s part 2 coming out
Why was he sad? Just asking
@@shaye170 He made a video on it a little bit ago. Basically, he had some problems in his house, and him and his wife caught covid, so they were worried because they didn't want to spread it to their daughter. He also had some other health issues, I believe.
What happened
Just letting you know, DO NOT paint the cones on your kefs. They are aluminum drivers, when drivers are made of a soft material you can dye them but with aluminum you will affect sound quality. If i were you if it really bothers you, you could reach out to kef. They make the LS50s in various finishes as well as have different coloured drivers depending on finish. Just order new drivers from kef in your desired finish.
good to know
The floating desk looks so good damn - this is gonna be a dope series, looking forward to the upcoming parts! 🔥
Spoiler alert
98 likes no comments?
@@AMAZINGRUclipsCHANNEL69 Now 177 likes and 3 replies
@@AMAZINGRUclipsCHANNEL69 Now 258 and 4 replies
380 likes and 4 comments
I could tell from the start that this was going to be a Monster of a build! This is amazing, I wish you all the best with your channel, you deserved it.
Bruh he said “That’s all we gonna do today” and all he did was move the table top from the garage to the room. He low key got me on that one 😂😂
Same lol
fo real
@Macadamion same😂
Mo to
lol
Ed, little tip when finding the studs... the outlet will always be attached to a stud, so there's one right there for sure, and the rest will be every 16" (on center) from there also.
It could be 12” also
@@stateofemergency4966 never heard of 12” in my area it’s either 16” or 24”
16 or 24. I would've used 4 studs
Moisture meter is used in case of flooding situations. You can use it to determine the areas where water damage took place in your sheet rock and studs. This is helpful so you don't replace/repair more than what was damaged by the water spill.
Me watching this as my dads man cave just flooded in the basement for the third time.
He could've used that when his toilet clogged🤣
Hey Edgar, I love the excitement behind the speaker upgrade! The 8k resolution comparison had me grinning because I can remember what it was like discovering the difference in audio clarity when I upgraded my recording studio speakers.
Regarding painting the copper center of the speaker diaphragm, as long as the material is a hard surface (actual metal) you should be okay. Just keep in mind that paint will add some weight to the cone which means the magnetic driver system will have to work harder to move the cone in and out to produce the sound you want to hear. This may result in some high frequency loss, and since this is not the tweeter, it may affect the upper mid-range where the crossover happens between the the main driver produces and the frequencies the tweeter produces. The only way to measure this accurately would be to use a frequency analyzer tool to show a graph. Set up a microphone in the sweet spot (where your head would be when you sit in front of them) and play a “sine sweep” through the speakers. If you do this before and after the paint, you should be able to see the difference in response characteristic the paint adds to the diaphragm.
This will likely be a minimal difference, and you’ll want to make sure you put the microphone in exactly the same spot for both tests. Also, using a measurement microphone (fairly inexpensive) will help the accuracy as well. Message me if you are curious about this and have questions! I’d be happy to help
ooh
so excited to see this all unfold. it's just as exciting seeing how passionate and determined you are to make it perfect!
Let’s gooooo the king of cable management has come to show us his ways
been waiting for this 🔥
The way he put so much effort and heart into the setup is crazy, man I wish I can get dream setups like you.
Hey Tech! I'm happy to see you and your family doing well. I just moved into a house myself and I'm looking for ways to set up my very first gaming/video editing station. I'll be looking at your videos for ideas. I'll also appreciate any recommendations if you can. Thanks bro!
You have fun in your new house
wow really cool but shortening techsource to tech must be the worst possible abbreviation in the history of mankind
@@jackiemitchell1350 Thanks bro!!
@@DeltaModelX fr lol, just call him edgar
Hey Ed. Your videos are absolutely STUNNING and just ENTERTAINING. 🤩🔥
I'm very happy that what you long awaited for, which is of course your DREAM SETUP, has finally started and is on the process. Not lying, the best part for me was the whole video or should I say THE DREAM DESK SETUP JOURNEY, Until... I saw SHILOH. During your outro, what I mean is from 37:52 till the end, I pretty much did not pay attention to you or what you were saying, except when you were talking about your Custom Tech Source RGB Logo, and your acoustic panels as well, but other than, I had my eyes on SHILOH. She was in joy during the outro and it was the CUTEST thing I've ever seen on the Tech Channel. 🥰💐
Glad to see ed happy! Hope everything is going well with life!
For the speakers...build a custom grill to cover the gold maybe something with your logo.
Bro Ed's hearts feels like he's giving you a seal of approval, great seeing you be happy bro. As always, a great video!!
Daamn, looking forward to follow the progress of this beauty🔥
Omg it’s finally happening I’m so proud of you Ed keep it up man can’t wait to see how it turn out
Lookin like you taking a break from the gym my dude. I feel yah, I’ve been on an extended break myself. Fatherhood, family, and work will do that. Hoping to get back on it soon!
For the placement of your sff pc, you could attach it under your desk like Optimum Tech did (you can refer to one of his videos). The pc would be “invisible” from the front since it would be under the countertop, it would lead in better temps and less noise overall.
But the pc is nice lmao
his was itx
@@mohamedahmedgamal4388 yeah that’s the point of an sff pc that Ed wants to put together for streaming
that would look so good.
the exact same idea a had when he said were to put his second pc, i immediately though about optimum tech itx build and placement.
The laser came in clutch, i can't wait for the final product of your dream set up.
that intro was so refreshing, after seeing a few recent vids from ed having a depressing note, due to covid, and house moving, just seeing him start off the video with a smile made my day
30:55 When i saw KEF on the boxes i was like daaaaaaaamn ! my man !
Omg I can already imagine how it will look it looks so amazing 😀😀😀 i can't wait to see the finished product 😄👍👍👍
once he said "that's all I have energy for today" it got me but what he's going through I would understand much love for still getting content out
Love to see that your happy again you never fail to amaze me with your setups keep up the good work mate 💕
I’m literally so excited for this series! Looking amazing so far! Huge fan btw! Idek how long I’ve been watching you lol it’s been years.
Generally outlets are mounted to the side of a stud, then from there most studs are 16 inches apart from each other in new construction if anyone is having trouble finding them!
You beat me to the punch
I cant even imagine what it will look like keep it up. Youve inspired me to upgrade from my integrated graphics laptop to a pc and good setup when I can, if i can. Great job ed.
Finally. I’m so excited
As a music producer, glad to see ed upgrade those speakers. A lot of people miss this feature in their own setups and it's such a greatly missed opportunity for a far better user experience whether you're into making music, playing games or just watching video.
The desk looks amazing. I can’t wait to see what the final product is.
I had my old timber front door (1500mm wide x 2100mm high) professionally repurposed into a worktop (1700mm wide x 800mm deep) when we remodeled our house. The door had a lot of character. Then I had a piece of 6mm white (so you don't see the green shine through) safety glass cut (furniture specification) and placed it over the door. It looks incredible and having the old door in my study underneath my gaming setup ads a bit of nostalgia.
I never realized how big BALD SOURCE'S forehead was until the laser was painted at it... LMAO 18:35
Much love man!
@7:21 dude I as a relatively handy guy with lots of experience moving heavy things, you need to secure the counter and if it is fragile wrap it in something like a painter’s blanket. So if I were you I would have wrapped the counter and used a few ratchet straps. I would also suggest looking up when lifting heavy things. As looking up gives you natural good lifting form. If you lift with your back you will damage it. If possible even if phoning a friend 2 people lifting something makes it so much easier. You also need to measure and make sure the object will fit before you try and jam it through a door. If it won’t fit one way you can also change it’s orientation. This isn’t supposed to be mean but there is a lot of room for improvement my man.
300iq Ed you love to see it glad your doing well and I hope you are having fun making your dream setup my guy
I actuallly like the gold on the speakers, it stands out, and makes it feel more like a rustic modern
Nice to see that smile after the covid situation and the house problems , glad to see the cheerful Ed again , cheers
You look happier now. I hope your life is getting better now. I hope your house gets fixed or is fixed.
The best addition is his kid. It makes the room livelier.
bro you are my fav RUclipsr and i'm so glad to see you are happy. Im new to this channel so keep up what you are doing.
thanks to you i fnally got my own pc and im loving it
Shaylas reaction when you told her to play with mommy is priceless
that cable management burnt my eyes. not expected from the setup guru himself !!
Aye the goat is back ❤️ cant wait for part 2🔥
amazing video im so exiceded for it to be done :) :).
I like the vision, the build and all yeah it's gonna look beautiful but the kid tho 😍. She's one cute, lovely goofball❤️ congrats man
I am glad to see that you are happy Ed I am excited to see how the setup turns out
i realy like where this is going
I’m so happy I found your channel I just want to say I love how you’re not selfish about the information you give us and you explain all the tools we need also the stuff to add into our gaming set up if it wasn’t for you I wouldn’t even known half the tools or what to do or start with building mines keep it up I love it ❤ new subscriber
Edgar being sus 26:55 “let’s get these babies out of here so we can play around with them tonight”
Really looking forward to seeing more.
Your daughter seriously gets more adorable each time we get to see her.
damn your daughter came to help with the new setup lol. how dare you chase her away haha
great content as always bro
looking forward to this series
Haha she’s so cute
Edgar, you should make friends with those construction workers. You could have asked some of them help you out bringing in the table. From my experience they don't tend to be jerks about helping out. Also it might be a plus for you with noise control. They might be able to work with you when you're recording and reduce noise.
7:26 yes Ed, getting it up IS the most important part.
Idk when this was recorded but good to see you doing well. God bless you and your family. Can't wait to see the finish setup
This setup has some dedication like damn
i cant be the only one that think the gold on the speakers adds a little bit of contrast that looks really nice
This looks sick man I am looking forward to pt 2 and I feel really happy for you this is gonna be a banger
That nvidia broadcast really did work wonders, I didn’t think the change was gonna to be that noticeable but it rlly was
Less goo I’ve been waiting for this for ages now and I’m really excited to finally see Ed build an amazing setup for himself👌👌😀
Although I did like the video it was super hard to watch the moving the table into the house process. I feel like you made it harder on yourself then it needed to be. LOL
Great video though! Love the content. You inspired me!
Ngl, personally i think the gold chrome accent on the speakers look amazing, and give just a touch of colour to your set up as it is literally just white which can get almost a bit boring to look at but all in all set up looks great so far.
@18:00 YOU HAVE A LASERLEVEL! That is level! Just measure down x inches from the laser level and mark the wall. Then attach the mounting hardware to the wall and put on the tabletop...
Man has my dream setup as his “temporary” set up and he just takes it down with ease 😭 can’t wait to see this series overtime
21:35 I'm always so thankful that our houses aren't built like that where I live, I don't even want to imagine how much of a pain it must be hanging up TVs and such things o.O
bro im so glad u and ur family are doing better just saw 288 set up wars it was clean lol
its good to see you in better and happyer condition
You have a good taste in music
Happy for you, bro! Love the setup ideas
I love your vibe, hope you are doing well solider!
put the mini pc on the right hand side of your office, either on an end table or on the right side of the desk. Makes it easier to route the cables behind everything since the back of the PC will be facing the right direction.
Me at the beginning: ED, YOUR CABLE MANAGMENT!!
Your videos are making my day for real
hey man for the new speakers ( on a SE point of view ) , i dont reccomend painting them becuase that is the membrane, and it needs to vibrate so the paint will ruin the quality of the speaker. Even if it doesnt sound very diff, overtime it will and it will also ruin the warrenty haha. good video tho!
Even that pc is amazing!🤤
It's a good thing that you have recovered Ed
The one thing I wish I had right now is the nvidia broadcast option. It is a total game changer! I can't afford more than what i have right now. I have the gtx 980, even though I feel fortunate to have that because it does work great and allows me to play all my games, but one day I'll be able to upgrade and get to use nvidia broadcast. It makes a huge difference.
this is more likely a 6 billion dollar setup! DAMN awesome can't wait for part 2
Woah woah woah, that “nonsense” is gladly something I’d take off your hands
Exciting! Can’t wait for part 2! Can you skin the speakers? Your a big enough RUclipsr maybe you can ask the company to send you custom ones 😂
I really enjoyed this video Ed and excited for part 2
I really love the long vlog style videos!
Hi Tech, you deserve this upgrade and I wish you and your family well!! 😁
I think for the pc builds , If you put them above ,kind of like books on a bookshelf. It would look amazing. Sometimes a bit of asymmetry gives of a good esthetic look .
House is beautiful man, well done
On another note, as much as I love your front doors and think they’re aesthetically amazing, my partner wouldn’t feel safe in the house with them
So happy your back your vid are so inspirational to make me build my own set up
Can wait to see the final setup, I might "stole" some of your ideas as i'm about to create mine, setup wars wait for me 😜
Well about your table top, hmm... well i think it's way too expensive for what it is, i'm pretty sure any wood worker would make you a nice and solid one for half price. Especially that it is made in laminate... well not the choice I would have done, but i respect your, it's your money bro 😁
Dont paint those speakers ed. Just add some bronze decor.. It will fit well.. Or you can change wooden keyboard wristpad. To match the speakers
Ed's been putting so much trust into the the Conner brackets giving me flashbacks when my whole wall got ripped out because of them 😭
you are the coolest dad on yt and twitch
Yesss been so excited for this!
It would Look awesome in my gaming room 😅😅😅 Love your Videos, best regards from Germany 🤙
Setup Looking good Edgar! I'm really interested to see how you setup and wire your head board with all the wires and how how much space between the wall and the headboard. I personally rent so I could never spend the time an effort into my setup like this only for me to move a year or so later. But yours looking AMAZING! Keep it up!
The desk alone is better than my setup😭 can’t wait to see it fully put together 🔥🔥
hope you feel better and wife and dauther,love your videos keep the good work my friend god bless you bud
Wow i was searching up setup videos for inspo for my new home and office, And i found you have the same exact model home as me and same office! What a small world lol
For the speakers I think getting some speaker grills would be best, most are magnetic and is a lot less risky than painting huge speaker themselves