CHEAP Golf Cart GPS Speedometer Install / Overview - UNDER $30!!!

I installed an amazon GPS speedometer on my ezgo golf cart today. Speed seems accurate and there's plenty of other features packed into this sub $30 speedometer option. This will work on any 12v electrical system, gas or electric, as long as you have a 12 volt source either from a separate battery bank, a gas cart with a 12v battery for the starter/electrical, or a voltage reducer which reduces the full pack voltage down to 12 volts.
All of the products I use are linked below! I don't get commission on these, but I'd like to... so please subscribe and help me out!
Speedometer - amzn.to/3E1Tn9X
Voltage Reducer - amzn.to/3DXtMPh
Stereo - amzn.to/3QBS60N
Speaker Pods - amzn.to/3QIjpGS
Switch Panel - amzn.to/3QHLsWF
Wire Strippers - amzn.to/3qE6A5x

[@troycurtis8620]

Thanks for the video. I installed one on my 2004 EZGO. It's a nice looking unit and I love having a speedometer on my cart. If the speed is off, you can adjust the default settings to make it more accurate.

[@MikeZimmermanOfficial]

Good to know! Thanks!

[@SmokinLoken]

Nice video. Looks like a great speedometer. I like your dash, it looks very clean and well assembled. The only thing I would recommend is to use actual electrical connectors rather than just twisting the wires together with electrical tape and shoving wires in with the spade connectors on your switch panel. Whoever installed the switch panel did a really nice job and it looks professional. I would follow that same level of workmanship to both ensure that wires don't come loose over time and to maintain the quality of work.

[@MikeZimmermanOfficial]

I did both, I've since cleaned it up but must not have had the parts on hand to do it "right" the first time. Thanks for watching!

[@bjbrunetti]

Nice video. I just bought a speedometer and trying to figure out how to wire power to the key switch.

[@MikeZimmermanOfficial]

What cart do you have?

[@bjbrunetti]

@@MikeZimmermanOfficial Yamaha g29

[@MikeZimmermanOfficial]

@bjbrunetti sorry not familiar with that wiring setup.

[@michaelbugger8863]

Whatabout hooking it up to a EZ GO TXT ignition?

[@brian5117]

Do you have to use the 12v to 5v reducer if you just connect using the USB directly ?

[@MikeZimmermanOfficial]

No, you wouldn't need to if you plug it into a USB port.