Ben mate, you are a bloody legend! pissed in charge of a drill, fantastic 😂 And why the hell not, it’s not hurting anyone. Looking forward to the scrap run video. Look after yourself fella
I came up with a new business venture : hard rubbish tours.Pack ten guys into a mini bus, trailer attached to it with Ben as a tour guide."This seems like a good street.Remember guys, no fridges!" and we'd just absolutely swarm the piles :) If you buy the deluxe package you'd get to follow along on the scrap yard runs :)
The coax cable roll is a delay line, more or less the idea is that signal does take some (very little) time to travel from one end to an other, it creates a time shift used in video signal processing. More common delay lines are those flat plastic boxes, using ultrasound waves travelling and bouncing in a piece of quartz or special glass.
those heavily silver (color) boards all had the round can type transistors on them. you should take those in situations like this cuz they are probably the ones with gold inside
You making the toroidal transformer talk is absolutely something I woukd do😂 but you didn't end the video with it like I do, I'm disappointed 🙃😂 Haha chin chin Ben🍻🥂 got to let your hair down sometimes ay😜!! I for one found it very enjoyable that you were tipsy, especially whe you said 'alc-hol' 😂 Enjoy your lay in!
no harm having feeling Ben we all have them take good care get ya feet up you are allowed what ever you need I fully get you on not seeing seeing people and liking a good chat
“Drink and a chat, with Ben” Maybe squeeze one of those videos in here and there. Talk about gold recovery, prepping, and what you’ll do with Every Game Console Made… Ever..
Before IC chips, transistors doing their job. They're as good as ceramic cpus for gold recovery. If you remove top cap, you'll see gold bond wires inside. Refiners are crying, when they see you're wasting transistors lol. Thank you for vintage scrap videos.
am dredging the day you get dragon units for EOS and pro animation gear stepper bed for cam action even the key pads lol there only plastic lead of wire
Brother I can not believe you never learnt to code. As you love tech I thought it was a given. Page 2 of website needs a file creating in the index. Html folder say prices. Then page one or most cases index. Html file needs editing to include a hyperlink to page 2. Then when the hyperlink is clicked it will access page 2. Hope thus helps
It would have taken thirty seconds to skin the insulation off of that thick antenna cable. Fill up a bucket with copper like that and they pay $3 a pound for it at the scrap yard. Don't need the money do you? Be kind and do good work. 🙃🦂😇🐯🦄💜
I have a question. Do you think there might be a resource shortage ? F.ex. copper ? I mean, there's such a 'hysteria' about green energy, and ev's that use up so much metals, and minerals.
Hai sir I’m manohara Reddy from India I can refine gold from E waste materials and I can supply Au immersion stripper to remove gold from electronic boards without damaging boards
Smoking is just as bad as PCBs and yet you smoke . I can't believe how expensive cigarettes are in Australia. Here in the UK they are expensive as well.
Ewasted Ben. Great video.
The last third of the video gave the "waste" in "eWaste Ben" a whole new meaning ^^
Ben mate, you are a bloody legend! pissed in charge of a drill, fantastic 😂
And why the hell not, it’s not hurting anyone.
Looking forward to the scrap run video.
Look after yourself fella
It's good to see you unwind & relax
I came up with a new business venture : hard rubbish tours.Pack ten guys into a mini bus, trailer attached to it with Ben as a tour guide."This seems like a good street.Remember guys, no fridges!" and we'd just absolutely swarm the piles :) If you buy the deluxe package you'd get to follow along on the scrap yard runs :)
The coax cable roll is a delay line, more or less the idea is that signal does take some (very little) time to travel from one end to an other, it creates a time shift used in video signal processing. More common delay lines are those flat plastic boxes, using ultrasound waves travelling and bouncing in a piece of quartz or special glass.
Famous last words, " I've got to do this sober. " 🤣 At least you didn't fall over - we've seen that from other creators 😂 Later mate.
You definitely do not have to apologize for having a good time with a friend, you definitely earned it!
You’re a hard grafter. Never mind some firewater 😂
Thank you Ben for a very enjoyable video six stars brother
Nice 😂 enjoy your whisky scraping can wait
Love the content Ben, keep up the good work, I’ve been watching you for along time now!
I miss the chickens 😢 but I love the addition to the spirits. Ben you couldn’t even hold a tool but 4 doubles will do that. Love the vintage scraping.
And these connectors that you're wasting, they have so thick gold plating best for gold recovery. By time consuming, they worth it.
those heavily silver (color) boards all had the round can type transistors on them. you should take those in situations like this cuz they are probably the ones with gold inside
tipsy ben = best ben :)
T-shirt idea: low grade > no grade
Ha! Great stuff, Ben!
I’m around people all day at work, so scrapping is my solace, alone time, just music and dismantling stuff. Scrap therapy!
You making the toroidal transformer talk is absolutely something I woukd do😂 but you didn't end the video with it like I do, I'm disappointed 🙃😂
Haha chin chin Ben🍻🥂 got to let your hair down sometimes ay😜!! I for one found it very enjoyable that you were tipsy, especially whe you said 'alc-hol' 😂 Enjoy your lay in!
NEW EWASTE BEN VIDEO!!! (When will you adress the great wall of cisco)
Way to finish!😂 nah, really, that was a good session of oddball vintage stuff. Love dissecting these things. You work hard, Ben!
no harm having feeling Ben we all have them take good care get ya feet up you are allowed what ever you need I fully get you on not seeing seeing people and liking a good chat
Great video even is a little sauced. Makes you human. Thanks for taking us along
You need to name your chickens Scooby, and scrappy. 🎉😂
Nothing wrong with a few drinks with a mate on a Sunday x
“Drink and a chat, with Ben”
Maybe squeeze one of those videos in here and there. Talk about gold recovery, prepping, and what you’ll do with Every Game Console Made… Ever..
Favorite part.. screwdriver toss and the realizations
Before IC chips, transistors doing their job. They're as good as ceramic cpus for gold recovery. If you remove top cap, you'll see gold bond wires inside. Refiners are crying, when they see you're wasting transistors lol. Thank you for vintage scrap videos.
The back board at 09:11 actually looks quite nice.
Have fun
You only live once!! Some days a little help to make it a better day
Great video my friend
Morning Ben!
Best video ever!!! Enjoy your buzz Ben. You deserve it!!
Breaker bar or crow bar would work 👍
Good on you Ben. Life is whisky.
Good day scrappers , great video mate 👍😁
Put a link to a Google spreadsheet on your site for your board prices. Easy to update.
Gotta make time to catch up with your mates - bourbon or not :-) Thanks for the vid.
The best video yet I love it mate
As long as you are not operating big power tools that can hurt you. Don't mind seeing a e-wasted Ben once in awhile.
Hi Ben. I have 👍👍👍❤❤❤😎😎😎
Im sure someone on here will be able to help you with the website page. Youv done plenty enough for the scrapping community.
One of the earlier pieces had Dallas modules which have small lithium ion (?) Batteries. The last one may have as well
Good on you bud👍👍👍👍👍🤣🤣🤣🤣🤣
Nothing wrong with that. God bless.
Nice work 👍🇧🇻 coming over for a beer 😉
I want a full eWasted Ben video. 1 hour of half-cut scrapping.
I miss the chucks
Non of these boards are weird or strange, that's just the way production was back then. More discreet components rather than integrated circuits.
E-wasted Ben! 😜😂
👍
am dredging the day you get dragon units for EOS and pro animation gear stepper bed for cam action even the key pads lol there only plastic lead of wire
Brother I can not believe you never learnt to code. As you love tech I thought it was a given. Page 2 of website needs a file creating in the index. Html folder say prices. Then page one or most cases index. Html file needs editing to include a hyperlink to page 2. Then when the hyperlink is clicked it will access page 2. Hope thus helps
324 NJ USA
It would have taken thirty seconds to skin the insulation off of that thick antenna cable. Fill up a bucket with copper like that and they pay $3 a pound for it at the scrap yard. Don't need the money do you?
Be kind and do good work.
🙃🦂😇🐯🦄💜
I have a question. Do you think there might be a resource shortage ?
F.ex. copper ?
I mean, there's such a 'hysteria' about green energy, and ev's that use up so much metals, and minerals.
Hai sir I’m manohara Reddy from India I can refine gold from E waste materials and I can supply Au immersion stripper to remove gold from electronic boards without damaging boards
When are you cleaning the rest of your garage? need a clean.
i dident espekt to see a tandberg,its made in norway were i live
Have you got your garage cleaned yet?
What do you do with the golden fingers, pins and chips?
Do those boards with the gold or silver tracing, but no IC chips, go as low-grade? Mid-grade?
Mostly low grade with no ic chips
Onde estão as galinhas?
🇧🇷🇧🇷🇧🇷
Sell that case for $40 at 2:28 EPROMS are worth money at 45:00
Smoking is just as bad as PCBs and yet you smoke . I can't believe how expensive cigarettes are in Australia. Here in the UK they are expensive as well.
Search about this article "Pulling gold out of e-waste suddenly becomes super-profitable"