The tip about lining up the two arrows on the tank and the cap when tightening was really great that I have not seen on any other videos for Corollas! Also like someone else asked, how did you finally get the cap off of the first vehicle you tried? UPDATE: After I wrote this reply I checked Amazon and they have special tools from different manufacturers specifically for this job. I saw one that is round and has grooves to engage every tooth on the ring! Search: tool for removing fuel tank lock ring or fuel pump lock ring for your specific vehicle (it's non-adjustable).But I would think that your own TRQ auto parts store would have this tool, right? Might save you the trouble of having to drop the tank as you suggest in the video!
Is the link in the description the same part as in the video? When I click the link and put my vehicle info (2003 toyota corolla) it says the part does not fit my vehicle.
My locking ring was fused to the fuel pump lid so it wouldn’t turn, like in your video. I was able to use a small pry bar and tap it between the locking ring and the lid, working my way around the perimeter to separate the two and ultimately remove the locking ring.
I took the red clip all the way off and even though it's not snapped or broken it won't go back into place no matter how hard I press it, its acting like it's too small and squeezes outwards.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
The tip about lining up the two arrows on the tank and the cap when tightening was really great that I have not seen on any other videos for Corollas! Also like someone else asked, how did you finally get the cap off of the first vehicle you tried? UPDATE: After I wrote this reply I checked Amazon and they have special tools from different manufacturers specifically for this job. I saw one that is round and has grooves to engage every tooth on the ring! Search: tool for removing fuel tank lock ring or fuel pump lock ring for your specific vehicle (it's non-adjustable).But I would think that your own TRQ auto parts store would have this tool, right? Might save you the trouble of having to drop the tank as you suggest in the video!
It actually looks pretty simple! The hardest part seems to be taking off/putting on that locking ring
How did you end up getting the stuck one off?
That Pokémon card under the seat with the trash is worth money
Is the link in the description the same part as in the video? When I click the link and put my vehicle info (2003 toyota corolla) it says the part does not fit my vehicle.
Do you have to change fuel pump when replacing fuel filter?
My locking ring was fused to the fuel pump lid so it wouldn’t turn, like in your video. I was able to use a small pry bar and tap it between the locking ring and the lid, working my way around the perimeter to separate the two and ultimately remove the locking ring.
What’s the name of the special tool
What's the torque on the four bolts And what's that "special tool" called?
On the new part there is no part to connect the big hose!
get 2 pry bars in a "X" position and smack them together. it will always work
Use a long 1/2 inch drive ext. and Breaker bar with the same tool or cut it off replace with a new one
I have the same identical collection bucket under my bath sink because of a leaky drain pipe.
hey does the fuel pump came with fuel filter?
This pump does not fit a 2003 Toyota Corolla, the page in the link you give says so.
Is the fuel filter part of the pump or is separate from the pump? If it is separate from the pump, where is it located on a 2003?
Thank you very much for such an easy and clear explanation. This helpful.
Use a big piece of wood and hammer it out worked for me not a pry bar
Guys, I can't unscrew the lid, I already bought the key. The ribs break and the lid doesn't unscrew. Who had this and what did you do?
This vid helped a ton! Thank you
2:45 push conector to easy pull yellow pin?
Gracias me ayudo mucho
Grate video
Thank you! Did it!
I took the red clip all the way off and even though it's not snapped or broken it won't go back into place no matter how hard I press it, its acting like it's too small and squeezes outwards.
Thanks bro!
Wow would never have known the seat comes off like that
Pay a mechanic...
Have a coffee...
Come back when ready...
Easy...
Pay a mechanic...
Have a coffee...
Come back when ready...
Easy...