The transom Turn fins do just that they enable the boat to turn sharply but as far as handling rough water the trim tabs do that work & are suppose to stabilize the boat but the problem is they aren't long enough to do that. For choppy water on that small boat you will need to install K-planes in place of the trim tabs. They are much longer & are adjustable. Cigarette boats & offshore race boats use them & they make miniature versions for RC boats. Had them on my nitro scarab S type & they work great.
Consider a volt regulator for the rec and servos . .. motors and ESC's can probably handle much, are throttled components anyway, where variation is expected. Static electronics not so much, where bias values and quiescent currents will increase and roast parts.
Hahaha she was air born many times skipping waves. Try her in calm waters. Man if she had wings. That was awesome Dan. Lol really enjoyed that very much. Be well brother Please everyone click the like button for brother Dan. And don't forget to add him and click the bell for future reviews and tech info. thank you
Drone Worship The Revolution thank you so much for the answer....👍🏽 So I will try to put in an 70-90A Esc and some upgrade of turn fins rudder and prop think this will work good but good to know that the motor will take the 5s power 🙂👍🏽 Nice regards
Hey bro I just noticed no one ever talks about what servos to use for it for better performance they use a mini servo right??? So let me know what you ended up using and some suggestions
As usual I have a couple things to say, First being, can the rudders stick down more instead of angled out? 2nd, any boat, speaking of even a real boat is harder to keep in a straight line when the waves are hitting the beam, when you think about it scale wise, those were probably 2 foot waves or better. 1100Mah is actually a lot of power since wattage (AKA Horsepower) is a function of current times voltage so with a higher voltage, the same amount of power takes less amps but then throw that higher voltage with that high discharge rate and whoa! Power city! Sweet rooster tail's coming off of her for sure! Enjoyed the view your Worship!
Yes sir however I only get about 6 minutes of play on a 2200 Mah 14.8 volt so this would only give me around 2 minutes 2 and 1/2 minutes at 1100 Mah with a 75c discharge rate. It was definitely Power City there's no doubt about it
Hey bro!! Awesome video! How you like that ft011? Do you have other boats? That worth buying? Any other recommendations for a brushless boat? I have the ft012 just haven't gotten to run it yet? Thank you so much!! God bless you!
@@tonyromano6220 this is in Oldsmar Florida and yes I understand why you've hopping will mess with the cooling however I've had this boat 2 years it's probably time for New esc see anyways
Hey mate nice you did 😁👍🏽...... But I think it only works because of these bad type lipos tried them with my 2s drone on 3s it was the same power 😝. With a tattu or nanotech I think soon or later it's necessary to upgrade the esc especially in better wind /water conditions but congratulations let us know any new tests and projects with the ft011. Keep up the good work 👍🏽 Nice regards
There was definitely a major power difference if I punched it at Full Throttle it would just roll over because it would get going too fast in the stabilizers would come out of the water if I had a wave it would go like 10 ft before it would connect with the water again so it was definitely moving a lot faster I'm trying to find my GPS so I can throw it so I can throw it inside to show the difference in speed
hey man good day greetings from philippines. its possible to upgrade 5s battery to ft011 all stock esc and motor? coz i'm planning to buy 5s to my ft011
So you don't want to know if the boat can handle a 5S battery on stock components? 🤔 because that's what this video is about. There's no clickbait I attach a 5S battery and I give it a rip and it burns components out.... I'm not sure what video you thought you watched but hey totally matches the title
I updated the title after realizing what the problem was so that was me trying to be honest for all of you I apologize if you don't like honesty maybe you should go find a channel that's willing to lie to you
Do not attempt this it will burn out your components!!!!
The transom Turn fins do just that they enable the boat to turn sharply but as far as handling rough water the trim tabs do that work & are suppose to stabilize the boat but the problem is they aren't long enough to do that.
For choppy water on that small boat you will need to install K-planes in place of the trim tabs. They are much longer & are adjustable. Cigarette boats & offshore race boats use them & they make miniature versions for RC boats. Had them on my nitro scarab S type & they work great.
Got to give them boats some love every once in a while!! Nice video and run!
Consider a volt regulator for the rec and servos . .. motors and ESC's can probably handle much, are throttled components anyway, where variation is expected.
Static electronics not so much, where bias values and quiescent currents will increase and roast parts.
Hahaha she was air born many times skipping waves. Try her in calm waters. Man if she had wings. That was awesome Dan. Lol really enjoyed that very much. Be well brother Please everyone click the like button for brother Dan. And don't forget to add him and click the bell for future reviews and tech info. thank you
That’s awesomeness in a box! Thanks for switching back to your “Dron Worship” intro👍
Hopping those waves LOL. So much fun!
Oh yes it's a beautiful thing
Ohh yeah! That beast can definitely handle 5s! Looking forward to the next attempt when the water is more calm. Great vid brother 😃👍
Awesome work again m8. I loved it even though rc boats are not in particular my cup of tea hehe. Love ya m8 ! Xxx
Fun to watch your boat test
Hey mate,
Do you now changed the heading of the video? The esc and Servo are gone?
THX nice regards 👍🏽
That's the reason I changed the name of the video so people would know it was tested and didn't work
Drone Worship The Revolution thank you so much for the answer....👍🏽
So I will try to put in an 70-90A Esc and some upgrade of turn fins rudder and prop think this will work good but good to know that the motor will take the 5s power 🙂👍🏽
Nice regards
Great boat mate like the mod love it and fast Don 👌👌👌👌👌
Hey bro I just noticed no one ever talks about what servos to use for it for better performance they use a mini servo right??? So let me know what you ended up using and some suggestions
As usual I have a couple things to say, First being, can the rudders stick down more instead of angled out? 2nd, any boat, speaking of even a real boat is harder to keep in a straight line when the waves are hitting the beam, when you think about it scale wise, those were probably 2 foot waves or better. 1100Mah is actually a lot of power since wattage (AKA Horsepower) is a function of current times voltage so with a higher voltage, the same amount of power takes less amps but then throw that higher voltage with that high discharge rate and whoa! Power city! Sweet rooster tail's coming off of her for sure! Enjoyed the view your Worship!
Yes sir however I only get about 6 minutes of play on a 2200 Mah 14.8 volt so this would only give me around 2 minutes 2 and 1/2 minutes at 1100 Mah with a 75c discharge rate. It was definitely Power City there's no doubt about it
Am so much fun for this run with 5S battery... but I think it's not safe as original in the package....
Great mod DW. She is fast . To bad it was a little choppy, didn't want to stay in the water.
Hey bro!! Awesome video! How you like that ft011? Do you have other boats? That worth buying? Any other recommendations for a brushless boat? I have the ft012 just haven't gotten to run it yet? Thank you so much!! God bless you!
Where is this?
Hopping screws with cooling.
Did you change stabilizers?
@@tonyromano6220 this is in Oldsmar Florida and yes I understand why you've hopping will mess with the cooling however I've had this boat 2 years it's probably time for New esc see anyways
Wonder would it works on 6s if u change esc and motors?
How long is the boat
Give me a hell yeah I will leave a like and continue watching Have a great week
Hell yeah!!!
I’d like to see those electronics on a out rigger
Hey mate nice you did 😁👍🏽......
But I think it only works because of these bad type lipos tried them with my 2s drone on 3s it was the same power 😝.
With a tattu or nanotech I think soon or later it's necessary to upgrade the esc especially in better wind /water conditions but congratulations let us know any new tests and projects with the ft011.
Keep up the good work 👍🏽
Nice regards
There was definitely a major power difference if I punched it at Full Throttle it would just roll over because it would get going too fast in the stabilizers would come out of the water if I had a wave it would go like 10 ft before it would connect with the water again so it was definitely moving a lot faster I'm trying to find my GPS so I can throw it so I can throw it inside to show the difference in speed
Drone Worship yes Iam looking forward mate 😉👍🏽
hey man good day greetings from philippines.
its possible to upgrade 5s battery to ft011 all stock esc and motor?
coz i'm planning to buy 5s to my ft011
Nice it handles 5s
You got crabs? There 😆
Huge ones!!!
Shes a beast bro 😉👍🍻
Sweet bro
Niiiice!!!👍👍
Your starting to scare me 😳
Vid should be titled Pushing RC boat to its Limits🥊🥊
👍👍
Gator Bate : }
Last time I watch your videos what a clickbait bulshit title... Did I watch The wrong video where you fried your servo and receiver or what...
So you don't want to know if the boat can handle a 5S battery on stock components? 🤔 because that's what this video is about. There's no clickbait I attach a 5S battery and I give it a rip and it burns components out.... I'm not sure what video you thought you watched but hey totally matches the title
I updated the title after realizing what the problem was so that was me trying to be honest for all of you I apologize if you don't like honesty maybe you should go find a channel that's willing to lie to you
Got it think I had a couple of beers in me when I wrote that
@@roady1710 lol