Спасибо, очень интересный ролик. Теперь буду знать особенности конструкции, скоро буду обслуживать свой Юпитер-9. Интересно было бы посмотреть как регулировать дальномер на камерах типа Зоркий и ФЭД. Так же интересно как согласовать работу геликойда с работой дальномера, чтобы не надо было к каждому сменному объективу подгонять дальномер.
221 циатимом мазать и всё норм. Его на 15+ лет точно хватит . Есть у меня такой объектив ,его ещё мой дед обслужил и до сих пор всё крутится прекрасно.
Hi, great video, but my problem is I bought the lens which someone tried to clean and didn't put any marking when the separated the helicoids. Any chance you can make a video to show how to reassemble helicoids and adjust focus to infinity without marking?
im curious about this too. i have a "red p" rangefinder which focus is very wonky on my sony fx3. maybe rangefinder wont work properly on it? its minimum focus is more like 3-4M and not 1.5M that ring states [this is with a L39-NEX adapter, tried a 39
@@ebanko9224 yeah but it doesn't line up with that measurement. I'm going to retake it apart. Rewatch assembly video. I think there were 4 points of threading and had to get right one? Been a while since I watched. The other thing is when I tighten helicoid it goes flush but then tightens more and extends back out of that makes sense. Something wasn't assembled right... I made marks to go by but think prior person didn't and I made marks on their error. Either way, have some time coming up to readdress it. I have 2 other Jupiter 9s but bodies are different than this one.
Thank you for the interesting tutorial. I have the same lens Jupiter 9 but with the Contax mount. It's different inside. I did not see any tutorial on RUclips that shows how to disassemble it. Do you have any link to show? Спасибо за интересный урок. У меня такой же объектив Юпитер 9 но с байонетом Contax. Он другой внутри. Я не видел ни одного учебника на RUclips, в котором показано, как его разобрать. У вас есть ссылка, чтобы показать?
Hi there, hope you understand English :) , few days ago I bought in Poland Jupiter 8 50mm, beautiful lens. Its working a bit hard, I thought it might need some oil etc. Do you recommend to open it and try to oil it or jus leave it the way it is? Thank you for the video :) and cheers from Poland
Спасибо, очень интересный ролик. Теперь буду знать особенности конструкции, скоро буду обслуживать свой Юпитер-9. Интересно было бы посмотреть как регулировать дальномер на камерах типа Зоркий и ФЭД. Так же интересно как согласовать работу геликойда с работой дальномера, чтобы не надо было к каждому сменному объективу подгонять дальномер.
221 циатимом мазать и всё норм. Его на 15+ лет точно хватит . Есть у меня такой объектив ,его ещё мой дед обслужил и до сих пор всё крутится прекрасно.
циатим 221 слишком густой для геликойда. я им смазываю кольцо диафагмы наппример, для плавного хода с сопротивлением.
@@gentlehand6523 а что более жидкое взять можно вместо него?
@@OlgaCanonistka ОМЧС хорошая смазка
Hi, great video, but my problem is I bought the lens which someone tried to clean and didn't put any marking when the separated the helicoids. Any chance you can make a video to show how to reassemble helicoids and adjust focus to infinity without marking?
may be
Мне тоже очень нужно. У моего щель гигантская. Скорее всего пытались разобрать и некорректно собрали
im curious about this too. i have a "red p" rangefinder which focus is very wonky on my sony fx3. maybe rangefinder wont work properly on it? its minimum focus is more like 3-4M and not 1.5M that ring states [this is with a L39-NEX adapter, tried a 39
@@prOkrEAt You have markings on body that says that minimum focus 1,15 M
@@ebanko9224 yeah but it doesn't line up with that measurement. I'm going to retake it apart. Rewatch assembly video. I think there were 4 points of threading and had to get right one? Been a while since I watched. The other thing is when I tighten helicoid it goes flush but then tightens more and extends back out of that makes sense. Something wasn't assembled right... I made marks to go by but think prior person didn't and I made marks on their error. Either way, have some time coming up to readdress it. I have 2 other Jupiter 9s but bodies are different than this one.
Thank you for the interesting tutorial. I have the same lens Jupiter 9 but with the Contax mount. It's different inside. I did not see any tutorial on RUclips that shows how to disassemble it. Do you have any link to show?
Спасибо за интересный урок. У меня такой же объектив Юпитер 9 но с байонетом Contax. Он другой внутри. Я не видел ни одного учебника на RUclips, в котором показано, как его разобрать. У вас есть ссылка, чтобы показать?
i did not finde tutorial for J-9 contax-kiev. in disassembly you shoud to make pictures and notes any step for.
Hi there, hope you understand English :) , few days ago I bought in Poland Jupiter 8 50mm, beautiful lens. Its working a bit hard, I thought it might need some oil etc. Do you recommend to open it and try to oil it or jus leave it the way it is? Thank you for the video :) and cheers from Poland
Hi! Carry it to an expert better)
@@gentlehand6523 you are the expert :) I could send it over to you next time. take care :) Pozdrawiam z Polski
@@gregsmith6373
Dziękuję!
To ja dziękuję. Pozdrawiam 👋
А недурно бы показать, как разбирать такой же, только для зеркалок белый ( бочку); чертова головоломка. Этот прост, хотя не без проблем.
50:03 экономика должна бвла быть эконосмной
Скажите, а где вы работаете? Можно ли обратиться с ремонтом? Спасибо
Контакты в описании.
Подскажите, сколько будет стоить такой разбор с целью смазки?
пишите, контакты в описании
Циатим 221 в качестве смазки?
нет
00:45 на моем такая же. Не очень привлекательно выглядит.
21:25 а что за смазка?
секрет)
@@gentlehand6523 дизлайк и отписка 😀
@@archie_en ну пока)
@@archie_en, ух-ха-ха! Каналу будет тебя нехватать.)))
В подобного рода резьбы закладывался литол, в советские времена, сейчас тоже можно, конечно, но лучше что то на его основе, что на морозе не дубеет.