Great video! Thank you! So much better than the default Kohler video. Really appreciated the drill bit size recommendations. Your advice to put on the side mirrors before the final mounting was also very helpful. One step that I did to help make the final mounting easier was to attach the top brackets to the wall so that they were not quite tight then set the cabinet in place. If your mounting hole was set at the top of the bracket, it could slide up to allow the cabinet to go under it. You then slide the brackets down and finish tightening. This kept me from needing to hold the cabinet the whole time while screwing in the long screws. It also helped avoid the awkward angle for the screwdriver when tightening those top brackets.
I am selling this exact model as a used item and it turns out the two upper mounting clips are missing. Your video showed the mounting clip in perfect detail and now I can fabricate them. Easy peasy. I find YT a fantastic resource for hunting up information. Just fantastic. Thank you for having created this video, which is superb by the way. When I sell my cabinet I will include a link to your video so the buyer can see the installation procedure.
Thanks for the video, ❤ took me just about an hour to install with your help , but you Definitely need 2 people to install! Thanks again from San Bernardino, Ca 👍🤙
Very good video! I wish we would’ve watched this before we installed it. It’s not right so we will need to buy wall anchors. What size wall anchors did you use? Appreciate your help!
I'm having such trouble with the mounting clips. I find it doesn't sit flush against the wall, nor does it seem to have an obvious home on the cabinet. And, the cabinet itself obstructs your ability to screw it on while holding the cabinet. This is the only part giving me the blues
This is exactly why I came seeking this video. You would think those brackets would have a more secure fit to the cabinet on the interior side. Seems like a really goofy design.
@@AaronBandt I agree, only one side of the clip seems like catches the top part of the cabinet. I installed it anyway, and it seems like it is holding the cabinet well. I think they could have come up with a better design for that clip.
You did the mount wrong. The instructions were terrible but even to me it was clear as day even after a 6 pack. Made it a lot easier for a 1 man job with the top mount. Thanks for the video regardless. God bless.
I just installed it alone. He was correct it sucked because of the clips. My opinion a poor design. I installed a similar cabinet a few years ago and it had a top plate that slid down from the top and locked in much more securely. These little clips make you doubt if you're even doing it correctly.
I’m having such a hard time installing those stupid clips. This thing is heavy. I already drilled the porcelain wall measured the bar is installed but the clips make no sense to me 😬
i have not ordered my cabinet yet. Just trying to figure out how a girl can hang it up there while working solo. Ummm... likely not. But i will find a way.
![Six Hundred Strike [EPIC: The Musical] Full Animatic](http://i.ytimg.com/vi/zov6NXIAuow/mqdefault.jpg)
Great video! Thank you! So much better than the default Kohler video. Really appreciated the drill bit size recommendations. Your advice to put on the side mirrors before the final mounting was also very helpful. One step that I did to help make the final mounting easier was to attach the top brackets to the wall so that they were not quite tight then set the cabinet in place. If your mounting hole was set at the top of the bracket, it could slide up to allow the cabinet to go under it. You then slide the brackets down and finish tightening. This kept me from needing to hold the cabinet the whole time while screwing in the long screws. It also helped avoid the awkward angle for the screwdriver when tightening those top brackets.
Good information, thanks for posting.
I am selling this exact model as a used item and it turns out the two upper mounting clips are missing. Your video showed the mounting clip in perfect detail and now I can fabricate them. Easy peasy. I find YT a fantastic resource for hunting up information. Just fantastic. Thank you for having created this video, which is superb by the way. When I sell my cabinet I will include a link to your video so the buyer can see the installation procedure.
Thanks, I appreciate the feedback.
Thanks so much for taking the time to provide clear instruction for those of use who learn visually. Very kind of you 🙏
You're very welcome!
Appreciate the video pal. Lowes did me dirty again and didn’t check before restocking. Great work, very easy to follow.
Thanks!
Thanks for the video, ❤ took me just about an hour to install with your help , but you Definitely need 2 people to install! Thanks again from San Bernardino, Ca 👍🤙
You're welcome!
What a great video, couldn't have explained it any better, well done. I'll be installing mine this week and with help.
Thanks and good luck!
You are the man, saved me so much time :)
Glad to hear that!
Great instructional video. Thanks!
Glad it was helpful!
Very good video! I wish we would’ve watched this before we installed it. It’s not right so we will need to buy wall anchors. What size wall anchors did you use? Appreciate your help!
I used 1/4" anchors.
Thank you!
I'm having such trouble with the mounting clips. I find it doesn't sit flush against the wall, nor does it seem to have an obvious home on the cabinet. And, the cabinet itself obstructs your ability to screw it on while holding the cabinet. This is the only part giving me the blues
I had trouble with this step also. Make sure the lip on the mounting bar fits in the slot on the cabinet (3:15) in the video.
@@Iscaper thank you for replying
This is exactly why I came seeking this video. You would think those brackets would have a more secure fit to the cabinet on the interior side. Seems like a really goofy design.
@@AaronBandt I agree, only one side of the clip seems like catches the top part of the cabinet. I installed it anyway, and it seems like it is holding the cabinet well. I think they could have come up with a better design for that clip.
Same as on RN! I’m so frustrated
How do you adjust the hinges saw that the doors will stay shirt?
Nice job! Thanks for sharing.
Thanks!
You did the mount wrong. The instructions were terrible but even to me it was clear as day even after a 6 pack. Made it a lot easier for a 1 man job with the top mount. Thanks for the video regardless. God bless.
Hi thank you for helping me to install my cabinet.
Plainfield indiana
You're welcome!
Thanks a million!
You're welcome!
Helpful video.
Thanks!
Thank you!
You're welcome!
When you did the mounting bar was it at the bottom or top of the medicine cabinet?
Mounting bar is at the bottom of the cabinet.
@@Iscaper Thanks I was able to install today using your video as reference! Thanks again!
@@KBradAdams That's great, thanks for watching.
Excellent!
Many thanks!
Will the installation work on the Koehler vedura model
You would need to look at the manual and see if it has the same mounting hardware and installation steps as this model.
Thank you sir!
Thanks for watching.
Any idea what size the side bracket screws are?
The manual says they are 3/8".
Thank you
You're welcome!
Very good, Thanks !
Thanks for watching.
How do you change the light bulb
The cabinet doesn't have a light.
You forgot the doors installation and slow close setting
Door came installed on my cabinet and there is nothing in the manual about a slow close setting.
Thanks for doing this. Oh this is NOT a well designed product for installation (IMHO).
Agree!!
I just installed it alone. He was correct it sucked because of the clips. My opinion a poor design. I installed a similar cabinet a few years ago and it had a top plate that slid down from the top and locked in much more securely. These little clips make you doubt if you're even doing it correctly.
I agree, putting the plate at the top and letting the cabinet hang down would make it much easier to install.
I’m having such a hard time installing those stupid clips. This thing is heavy. I already drilled the porcelain wall measured the bar is installed but the clips make no sense to me 😬
Nyatakan matlamat dan perlukan wang
My doors not even so back to lowes
Sorry to hear that 🙁
i have not ordered my cabinet yet. Just trying to figure out how a girl can hang it up there while working solo. Ummm... likely not. But i will find a way.
It's not easy, a short step ladder helps. Good luck!
Thank you
Welcome!