[ENG SUB] I couldn't order a Steam deck, so I made a portable (?) gaming PC myself.
HTML-код
- Опубликовано: 14 июл 2024
- The Steam Deck is finally released to usurp the throne of high-performance portable game consoles occupied by Chinese UMPCs. Perhaps this will be a game changer for the high-performance portable gaming PC ecosystem. No matter how much you think about it, it is clear that it is a device that cannot be found at that price.
But if you can't buy it, it's the pie in the sky. You can't even make a reservation in Korea. So, before the Steam deck came out, I made a portable (?) high-performance gaming PC. I think it should be called UHPC (Ultra Heavy PC) due to its enormous weight. Of course, the cost-effectiveness is very low and the portability is also low, but I hope you will see that I made my own portable gaming PC.
Membership registration (membership member-only community and member product remodeling)
/ @diydrk
Purchase link (Purchase through the link will provide me with a small amount of points. There is no difference between the purchase price of the general link.)
10.1-inch display case (16:9): s.click.aliexpress.com/e/_9yKzph
10.1-inch touch display: s.click.aliexpress.com/e/_ABeJx9
18650 battery: buy online, offline
3S charge/discharge module: s.click.aliexpress.com/e/_A0tAKJ
Charging jack: s.click.aliexpress.com/e/_9J0t35
Speaker: s.click.aliexpress.com/e/_AspiwB
Joypad: s.click.aliexpress.com/e/_9h1LjV
Battery level indicator: s.click.aliexpress.com/e/_A4eduR
HDMI terminal and cable: s.click.aliexpress.com/e/_AaSwEf
Chapter
00:00 Intro
02:28 Description of the device to be built-in (NUC8i5BEK)
03:51 Case processing and NUC mounting
06:16 battery and charging circuit work
09:12 Battery addition work
11:18 Speaker mounting and bottom plate finish
12:38 Joypad work
14:36 Display work
16:02 Joypad mounted
17:29 Interior finishing work
21:20 Close
22:37 Exterior finishing work
23:26 Finished product description
26:19 Game Test - GTA V and more
28:32 Finish
#SteamDeck #MakePortableGamingPC #UMPC Наука
Gracias por poner los subtítulos en Español, es un excelente video el que subiste mucho exitos para tus demas ideas sos un genio hermano
영상도 재밌지만 댓글도 잼있어서 번역기 까지 돌려가며 끝까지 다 읽어봤네요.^^ 저는 3D프린터 안하시고 뚜닷 하는 이게 닥터케이님의 찐 매력이라고 생각해요. 닥터케이님 때문에 첨으로 DIY에 흥미를 가졌고 주변에 있는 물건으로 뭔가를 만들어 내는게 너무 좋습니다. 10인치 1.2키로 진짜 남자의 휴대용 머신. 땀냄새 찐하게 풍깁니다.^^; 들고 다니면서 이두 운동도 겸할수 있는 건강머신 잘 보고 갑니다.
감사합니다. 3D 프린터 사용하면 뚜닫 파트가 사라지게 되는 안타까운 면이 있습니다. 그리고 조회수가 더 보장되는 것도 아니구요. 무조건 3D 프린터를 예찬하시는 분들은 유튜브의 성공 요인을 간과하는 면이 있는 것 같습니다.
Awesome project 👍 I always thinking how do you know those bunch of wires go to which ends
스팀덱보다 완성도는 떨어질지 몰라도 그만큼 개인의 고생이 들어갔고 그냥 만드는 과정 구경하는것만으로도 너무 재밌네요 ㅋㅋ
진짜 금손... 대단하십니다 ㄷㄷ
그리고 리락쿠마 라벨기 너무 귀여워요!
I had absolutely no idea what you were doing with the batteries at first but it ended up great when you surrounded the motherboard with them. That's an awesome and efficient way to use space. Very nice. Love this project, it's a great way to reuse old electronics like the NUC, and a handheld PC is awesome. :D
알고리즘으로 몇번 보다가 이젠 찾아보게 되네요 ㅋ 너무 재밌게 잘보고 있습니다.
항상 볼 때 마다 실력에 감탄하고 봅니다. 대단하세요!!!
오늘도 여전히 너무 재밌게 보고 있습니다!
GTA 아주 예의바른 인성플레이에 또 한번 감탄하고 갑니다ㅋㅋㅋ
영상 너무 자주 올라와서 좋아요!
이벤트 당첨은 아직도 한번도 안되었지만ㅜㅜ
이번것도 이벤트 올리시면 신청하고 싶을정도로 탐났다고 전해드리고 싶네요ㅎㅎ
감사합니다. 이것을 드리면 욕만 먹을 것 같아서 차라리 스팀덱 최하위 모델 사서 그냥 드리는 것이 나을 것 같습니다(가격도 스팀덱 최하옵이 훨씬 저렴함 ㅋ)
😎👏👏👏 *Excelente vídeo!, Llevo tiempo ya queriendo hacerme algo así y me haz dado muchas ideas más. Por lo pronto ya vi y quedó demostrado lo que siempre les decía a mis amigos: "Que si es posible crear tu propia consola de videojuegos con los materiales y equipo apropiados!". Ahora comenzaré a sacar medidas, para crear una buena carcasa impresa en 3D!* 😎
This guy is such a god man, Thank you for the subtitles aswell broooo
정말 영상 볼때마다 우와 소리가 절로 나오는 기기들을 만드시네요
haha this guy will be legendary once he learns 3D printing
이런 재주 있으신분 보면 정말 부럽다는 생각밖에 안드네요 잘 봤습니다
Cuando es el lanzamiento oficial de la UHPC, para reservar dos!!!!, excelente, mejor no podria rendir, exitos !!!!, saludos desde Costa Rica!!
역시 멋집니다 !! 영상 잘 봤습니다 구독자 10만 달성을 향해 응원하겠습니다
감사합니다. 10만 정말 멀게만 느껴지는데 작년 1월에 1만이었던 것을 생각하면 그리 멀지 않은 것도 같고...
오늘 영상도 잘봤습니다~ 수고 많으셨어요
죽여주네요~항상 멋진아이디어 영상 감사합니다
와, 스팀덱 대신 손으로 만든 수팀덱
수팀덱 노.
손팀덱~ㅋ
ㅋㅋㅋㅋ수팀덱 ㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋ
ㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋ
라임
안 지렸다
합격목걸이를 가져다주시오~
Apenas lo conocí, pero es muy admirable la habilidad y destreza que tiene, lo motiva a uno para aventurarse
This was really cool, thanks for sharing.
이건 진짜 제조원가에 두세배 불러도 한명쯤은 살 사람이 나올거같아요.
저는 썸네일보고 당연히 클라우드 이용하셨을줄로만 알았는데... 입이 안다물어지네요 ㅎㄷㄷ...
와 형님 대단하십니다 게임에 대한 열정에 금손까지 지나가다 보고 좋댓구 박고갑니다
좋댓구 감사드립니다~!
와....진짜 올만에 들어왔는데 오프닝 발연기는 여전하시네요 ㅎㅎㅎㅎ
Love ur creativity.. keep going
영상 잘 봤습니다 유튜브 좋아요 누르고 댓글 달아보기는 처음이네요~
영광입니다. 감사합니다.
Thank you for sharing your talent and inspiration.
This reminds me of a project I never made, but it would've used a similar LCD shell, but with a 7" touchscreen, and an original Raspberry Pi Model B (I came up with my project in 2015), and without the game controller (instead, connecting external USB keyboard and mouse).
I would have use a compact power bank 45 w output 10.000 20$ the ones with usb 3.0 for output and charging
I have a spare NUC laying around with similar GPU potential and looks like this screen enclosure would be great for a project. Will save me a lot of time instead of designing and 3D printing larger parts.
와~ 님 찐텐이네~ 구독 박습니다, 능력자 gooD
배우고싶네요 이 기술력 정말 대단!
뭐든만드시는 당신은 빌더즈?ㅎ 역시 대단하시네요 뭐든 뚝딱만드시는 손재주부럽습니다
진짜 금손이시네요ㅎㅎ
훌륭합니다
Me encantó, eres genial nada te puede detener 🧠
이번건 외관 상관없이 상당히 매력적이내요.
닌텐도 스위치가 크게 흥행에 성공하면서 그에 따른 기술력을 바탕으로 이런류의 휴대용 pc게임기가 나오는게 참 신기할 따름입니다.
이쪽 산업이 또 성공을 한다면 전용 게임이 나올지도 모르겠습니다.
오늘도 재미있게 잘봤습니다.
외관, 무게를 빼야 매력이 있습니다 ㅋ 아무튼 세워놓고 외장 디스플레이 연결해서 써도 되고 썬더볼트 eGPU도 연결할 수 있고 다용도이긴 합니다 ㅎㅎ
정말 놀라운 능력의 소유자 십니다. 부럽습니다.
You did great!!! Looks awesome!
스팀덱 정발되면 갖고싶네요...
살수없어서 직접만드시다니 대단하세요ㅋㅌㅋㅋㅋㅋㅋㅋㅋ
저도 갖고 싶어요~
Fascinante ! 당신의 채널은 훌륭합니다! 아르헨티나에서 온 인사말!
Se ve re-chidori, Dr.K GOD como siempre ^^
드래곤마운틴에
어딘가 존재할듯한
은둔 고수 느낌의 영상
잘봤습니다.
금손님 부럽습니다.👍
Genial amigo un saludo desde Colombia tus videos son muy buenos y entretenidos 👍👍
손재주 정말 부럽네요 기판 보실줄 아는분들 정말 부럽습니다 구독 박고 갑니다!
구독 감사드립니다~
손재주가 대단하시네요.. 저런건 나도 갖고 싶다..
That’s so awesome I like it and I kinda wish that someone could teach me build something like that 👍
Cara você nerd gênio teclogia, gostei muito do seu trabalho 👍
Ele e chinês :/
@@azy3mil Coreia do Sul.
인트로 발연기에 점점 빠져 듭니다…
개 죠아요
닥터케이 : 발연기 2년차...
아무리 연습해도 연기가 늘지가 않는다.
Great videos really like your job 👍❤️❤️
연기가 상당히 좋으세요!!! 넘 재밌어요 ㅎㅎ
결과물도 결과물이지만 개조과정이 참 재밌어서 계속 보게되네요
감사합니다~
갓터케이 님 잘봤습니다 찬양경배해 !!! 손도 이쁜 우리형
와... 대단하십니다!!
전 사서 하겠습니다!!
I wish I had so much intelligence and experience to be able to make these electronic modifications. I would definitely be your student if I lived close by to take classes. Another amazing project completion. Congratulations for the videos and work. I smile watching your videos! Hugs from Brazil !😀🙌🏻🙏🏻👏🏻👏🏻👏🏻👏🏻👏🏻🤗😎
If I have a chance to make a tutorial video for beginner, I'll cover essential technical knowlege and skill someday. Thank you.
닥터케이님 명연기 잘 봤습니다. ㅎㅎ
저는 저 패드에 8인치 안드로이드 기기 붙여서 스트리밍 게임 전용 기기로 사용 중입니다.
그게 가성비로는 킹왕짱이죠 ㅎㅎ
Un consejo, haz el diseño y imprime la en una impresora 3d o si no la tienes hay sitios que les pasas tu diseño y te la imprimen y no te volverá a pasar los problemas con la carcasa. Pero es muy buena alternativa al Steam deck.
진짜 3d프린터 모델링 기초만 배우셔도 엄청 날거 같아요
Lo vi con subtítulos en español buen video ya tiene un nuevo subscriptor.
Wonderful video
와 진짜 만드는 능력?이 정말 부럽네요 😲
글루건은 다이의 혁명이네요~ㅎ 영상 잘 보고 갑니다~
DIY 최대의 발명품 글루건~
Thanks for the Portuguese subtitles, your work is amazing, you won a subscriber from Brazil.
Thank you friend form Brazil.
정성이 대단하시네요
Gracias por los subtítulos en español sus trabajos son geniales 👏👏👏👏
3D프린터 작업은 직접 하시는게 아니라 전문가에게 맡기는게 베스트입니다.
적당한 도면만 구하셔서 맡기시면 알리에서 사는거랑 비슷하게 하실 수 있으실겁니다.
그리고 개인적으로는 이제 나올 펜티엄 n6000 사용하는 미니 PC들이 기대됩니다. 게임패스 랑 PS2 에뮬까지는 잘 될거 같거든요.
This is wonderful dude. Your hands are golden lol
역시 능력자 k형님👍👍👍👍😍
I liked your video, you are very smart and creative.
넋놓고 봤다 ㅎㅎㅎ
Exelente experimento amigo.saludos
진짜 대단하신듯.....
대박입니다~ 게임기 제작회사를 만들어도 되겠어요
Very cool! =)
3D 프린터작업도 곧 하실꺼같아요 ~! 작업하시면 정말 대작 아이템들이 나올듯싶네요~!^^
영상 항상 잘보고있어욧~!
3D 프린터는 올해는 계획 없습니다. 감사합니다.
Nice setup
This was interesting to watch. For those like me who aren't savvy on building computers, you can alternatively get your hands on a used Surface Pro (I use the Surface Pro 2, doesn't play Witcher 3 or GTA 5, but plays older games pretty well in 720p), the newer models with i7 and 16GB RAM Intel Iris should be able to play these games even if at medium quality, and either an XBOX One gamepad, Playstation 4 gamepad or gamepad suggested in the description and you're set. I was lucky to get my hands on a Surface Pro 2 for about 140 bucks, then a PS4 Dual Shock for 30 bucks, that's less than 200 dollars for a portable game pc/ Steam console. While it's not top of the line, I played San Andreas pretty nicely, as well as Skyrim SE (i5 4200u with 4GB DDR3). If you're going for the true handheld experience, just be careful to check gamepad compatible measurements and BT protocol compatibility with the latest Surface dimensions. Hope this is useful, good luck!
캬 낭만 있네요
That's just awesome man
금손이시네요! 저도 함 만들어 보고 싶어집니다.
영상 설명에 부품 링크 있으니 도전해보세요.
인트로 국어책 읽기 넘 재밌습니다ㅋㅋ
국어책 안 읽고 그냥 이야기 한건데...😭😭
U r the best my friend
동생이 사달라고 하더라구요.. 근데 가격보고 엄청 놀래서.. 좀만 참자고 했죠 이런 기술만 있으면 직접 만들어줘도 되겠네요^^ 진짜 굿입니다.
영상 잘 보고 갑니다
ㅋㅋㅋ 만화본 입장에서 이름이 닥터케이인게 너무웃겨요 잘봤습니다
매번 실력에 감탄을 하며 보게 되네요 ㅎㅎ
Nice..perfect bro...👏
Hey! We have the same UWFHD LG Monitor! Just saw that. By the way, nice handheld.
예구는 하셨는지요 ㅎㅎ
진짜 가격을 생각하면 너무 좋은 기기인데, 제 예구 날짜도 지금 3분기 후로 밀린 것 같은데 받을지 모르겠습니다 ㅠ
지금은 저는 원액플이랑 아야를 쓰고 있긴 한데, 내년에 스팀덱을 받는다고 생각하면 내년에 또 6000번대 라이젠 단 중국제 브랜드들이 나올테니 구매전에 비교하는 맛이 있을 것 같아 너무 좋습니다.
이쪽 계통이 워낙에 취미와 애정이 없으면 못하는 부분이다보니 항상 재밌게 보고 있습니다 :)
사실 지금 원래 보던 계정이 아니라 구독 몰래 박고 댓글 이렇게 답니다 항상 잘 보고 있습니다. 저도 취미로 자체 제작 할 수 있었으면 좋겠습니다 ㅠ 좋은 영상 재미난 영상 감사합니다.
저도 사고는 싶지만 사면 또 안하게 되더라구요. 할 시간도 없구요 ㅠㅠ 그리고 이제는 휴대용보다는 4K모니터에서 콘솔로 하는게 더 좋아서...
Great job
Nice info, thanks :)
혜자다!혜자!!!! 근대...출시는!?!?!? 이러고 만드시는 닥케님은 ㄷㄷ
영상 잘 봤습니다.
케이님 영상을 보다가 궁금한 것이 생겼는데,
모듈들 하고 전선하고 연결할 때 규칙에 맞게 납댐을 하시는건지, 아니면 그냥 아무렇게나 납댐을 하시는건지 궁금합니다.
상남자식 선정리에 마음이 편안해지네요 ㅋㅋㅋ
역시 DIY에는 글루건!
이렇게 까지 영상에서 제가 왜 글루건을 좋아하는지 알기쉽게 이야기 드려도 왜 글루건 쓰나요? 라고 물어보시는 분들이 계시네요. 왜 내부 마감을 이야기 하시는지 그것도 좀 이해가 안가구요. 마감이라는 단어의 의미를 모르시는지...
@@DIYDrK 다들 깔끔한 유튜브식 DIY에 익숙해져서 댓글에서 계속 같은 이야기가 나오나보네요.
오히려 이런것들이 실제 DIY의 재미인데 스스로 안해보신분들이 그냥 눈으로만 보고 불평하는 것이겠지요.
Dr.K 채널만의 차별화되는 매력이니 곧 10만 50만 100만 가실것 같네요, 화이팅!
대단하다 이 뷴 ㅋㅋㅋㅋ 대박 ㅋㅋㅋ 최고
Follower from Philippines sir..I always love your masterpiece..I think I want that
동작이되네요ㅋ 잘봤습니다.
No se como llege aquí pero no me arrepiento.
Buen video
This is so good console build man.. greetings from Malaysia
후면버튼 녹은게 아쉽네요 ㅠㅜ 잘보고갑니다!
이런 거 보면 능력자들 정말 대단한 듯 ㄷㄷ
Great video!
Very cool, but also makes me very glad that I'll be getting a real steam deck, haha
Wow congratulations!!!