It is February 2023. This remains one of the better, if not the best, reasonably-priced chronos. Here in the U.S. it is not available, not even on eBay from U.S. sellers. Like you noted, since this is an internationally-sold product the operating manual is typically cryptic. So fortunately there's RUclipsrs like you helping us out in that department. So thanks.
Very helpful video. Many thanks. I just bought the LMBR 2 in the UK from Ebay. Mine is more compact with a "box" shaped structure and has a "letterbox" to shoot through. The button functions are identical though and it was much easier watching your video than scratching my head and working through the flow chart.
Found video very useful, however I think you will find although it looks like a vga connector its actually an RS232 connector. VGA of course video, RS is for data transfer. Would therefore require an RS232 to USB cable, easy to get, £12 and upwards. Thanks for video.
Should it be Calibrated to 50mm gap between sensors? How to do this? Also.......how do I clear my shot strings once I'm finished each 'session' ? Many thanks Jim.
To erase all data, switch unit on, press and hold S3 for a second. To calibrate hold S3 down then switch unit on, Gate should appear on the screen, adjust using S2 & S3, then press S1 to go back to main screen. LMBR have said to set the gate at 50.15. Have you not got the instructions?
@@Maddogairguns Hi, Yes, I got the instructions......but I'm Scottish !!!!!!!!!!!!!!! ..... we're nit very bright !!! The Gate came set at 49.95..............should I leave well alone...........?....or change to 50.15? Seriously, the instructions ciuld be much better !!!! Jim.
@@agoogleuserblootet5111 I totally agree about the instructions, not very clear. From research online, LMBR have told multiple people to set it to 50.15, so that's what I have set mine to
I have just purchased a LMBR R2A chronograph. On removing the plastic cover to insert the batteries, the underside of the plastic cover has a white plastic film attached to it. Do I peel this white film off?
![Is this the best chronograph you can get - LMBR [review]](http://i.ytimg.com/vi/fdqFbwuebiA/mqdefault.jpg)
![Is this the best chronograph you can get - LMBR [review]](/img/tr.png)
A great bit of kit to have, will be very useful in the future.
It is February 2023. This remains one of the better, if not the best, reasonably-priced chronos. Here in the U.S. it is not available, not even on eBay from U.S. sellers.
Like you noted, since this is an internationally-sold product the operating manual is typically cryptic. So fortunately there's RUclipsrs like you helping us out in that department. So thanks.
Nice explanation of settings...ive just ordered one....and saved this vid if i get stuck..🤣😅🤣 Thank you.
Thank you for a nice, concise video. No dealers here in the states. I ordered from England, shipped from Germany. Received in 5 days!
Very helpful video. Many thanks.
I just bought the LMBR 2 in the UK from Ebay. Mine is more compact with a "box" shaped structure and has a "letterbox" to shoot through. The button functions are identical though and it was much easier watching your video than scratching my head and working through the flow chart.
Same as mine but can't get a reading any ideas
wish you did stuff in FT/1BS, but great video, clear, entertaining and to the point, i’ve subscribed, regards, Steve ( UK )
I've had a few requests to do it in imperial rather than metric. I will try to show both next time.
Found video very useful, however I think you will find although it looks like a vga connector its actually an RS232 connector. VGA of course video, RS is for data transfer.
Would therefore require an RS232 to USB cable, easy to get, £12 and upwards. Thanks for video.
Can you use that for an archery?
Thanks for reply appreciated 👏
Cracking review very helpful 👌👍
Does the Airsoft shop stock LTL bravo???
Merci Mad Dog, je pense acheter celui ci, mais il est assez difficile à trouver, enfin pas vendu partout malheureusement, et moins cher que le MK3😉
www.tlgunshop.com/PBSCProduct.asp?ItmID=21336625
How close do you need to hold air rifle to the chronograph?
40-60cm
Should it be Calibrated to 50mm gap between sensors? How to do this?
Also.......how do I clear my shot strings once I'm finished each 'session' ?
Many thanks
Jim.
To erase all data, switch unit on, press and hold S3 for a second. To calibrate hold S3 down then switch unit on, Gate should appear on the screen, adjust using S2 & S3, then press S1 to go back to main screen. LMBR have said to set the gate at 50.15. Have you not got the instructions?
@@Maddogairguns Hi,
Yes, I got the instructions......but I'm Scottish !!!!!!!!!!!!!!! ..... we're nit very bright !!!
The Gate came set at 49.95..............should I leave well alone...........?....or change to 50.15?
Seriously, the instructions ciuld be much better !!!!
Jim.
@@agoogleuserblootet5111 I totally agree about the instructions, not very clear. From research online, LMBR have told multiple people to set it to 50.15, so that's what I have set mine to
@@Maddogairguns Thank you my friend......and thank you for the video.
Jim.
Do you have a link for a software program for windows that I can use with this chrono please?
Bonita Stravenue
Hi there, what is the gate measurement in imperial please as my version is only in Imperial?
If you have an lmbr, you can switch between the two. I don’t think they do it in just one measurement.
thanks mate, gn low, gn high,,,,would have pull my hair out if i had any,,,sorted now many thanx.
No problem 👍
I have just purchased a LMBR R2A chronograph. On removing the plastic cover to insert the batteries, the underside of the plastic cover has a white plastic film attached to it. Do I peel this white film off?
I peeled both the clear and the white film off mine, still works fine.
Can it measure shootgun pellets?
Not sure. I have something coming this week (not shotgun) that will fire multiple bb’s. I’ll see if that works.
@@Maddogairguns thx
Kovacek Views
Please chrono the HDR50
It's coming very soon.
Finn Islands
Thank you for a nice, concise video. No dealers here in the states. I ordered from England, shipped from Germany. Received in 5 days!