Hoshizaki Advanced Training - KM Cubers - Diagnosis and 10 Min Checkout | Part 3
HTML-код
- Опубликовано: 7 сен 2024
- Part three of the Hoshizaki Advanced Service Training covers the diagnostic and 10 minute checkout procedures of the KM Cuber Series Ice Machines (crescent cubes). Troubleshooting the ice machine.
Best ice machines in the world ...period.
Thanks phil955i!
Cool. I'm going to let my helpers know about this channel.
Gracias por compartir 👍
please upload more videos like this
Just uploaded 3 new preventative maintenance videos!
great videos do you know where I can order the tech books so I can have them on my truck thanks
You can get them from your local Hoshizaki Distributor: hoshizakiamerica.com/locate-distributor/. If they don't have any in stock... please remind them they can order them through the Hoshizaki Print on Demand portal. These are the same orange tech books given at Hoshizaki Service Schools.
My Hoshizaki ice machine suddenly has problem. The ice pieces are connected to each other and form a whole big piece of ice pad. Do you have any ice what's wrong with it? It's only 2 year old
Sorry for the delay. Ice bridging usually occurs due to a restriction in water flow. So first replace water filters (replace every 6 months), clean water inlet screen, clean spray tubes. Depending on the water conditions in your area you may need to do this preventative maintenance more frequently than outlined in the model's instruction manual (www.hoshizakiamerica.com/manuals). If those do not fix your issue call our Tech Support with your model and serial number at 1-800-233-1940. They can help diagnose most issues over the phone.
@@HoshizakiAmericaInc Thank you so much for the info
How do you adjust the dimple size on the ice cube for IM100NCE?
How did I end up here?
What are you looking for?