I think your woodworking is great (I'm jealous). Your designs are simple and functional and beautiful at the same time. Thank you for making this video.
Thanks for coming up with the most versatile RT design, I searched the net for a better design ,couldn't find one as simple and functional as yours so I copied it except I didn't drill the fence from the front,instead ,I used 4 female inserts in the back,everything else is exactly the same. two thumbs up to you Mr Ramsey.
Steve, I made my router table as I wrote to you about. After watching you table, I now find myself ready to rework my table with some of your great ideas. GREAT JOB and also very nice to look at.
Thank you so much Steve for taking your time to make these videos. They are super helpful to us guys who are just getting into wood working. People like you who are selfless in doing this is just one of the reasons that make this world great. My Dad never spent any time with me to teach me about this craft so I thank you. I think you are a truly great craftsman. Robert
I appreciate your practical approach. I've watched a number of these "tutorials" on router table construction. Yours is simple and well-edited. No superfluous comments. The simple joinery makes goods sense for a simple, strong cabinet. Thanks!
I am seriously impressed with your level of productivity. As a new years resolution I determined to make a router table it is now just after mid year and I have a router mounted on a plate and some components for the fence, a table frame and not much else.
I just ran across this and see where it is now an 8 year old video. But a very good one. Thanks for leaving it up. The best I have watched on a Router table.
One thing I favor about Steve's vids are he doesn't use 18 different expensive tools to complete his pieces. Just alot of know how and creativity.. nothing against lots of fancy tools just I can't translate them to my projects at the moment! Thanks Steve.
Just discovered this video. I've watched several of these on the same subject and yours is miles ahead of everything else I've watched. Well done and thank you.
Steve you have a great sense of humor. Noticed your Porter Cable router. I upgraded to larger Porter Cable router and a router table.a few years The table had over 300 part with all the hardware. Assembly was a bit overwhelming.I gave the table to a friend whose an engineer. Enjoy watching your videos. Thank You
Great!!! Never used a router before. Had one but never used it .Now half way to making my table top ( - wish I had bought the insert you recommended.) Very good vidio - clear, and easy to follow. Many thanks. bill UK.
This is a great teaching tool. Your explanations and thought process are really, really helpful. This is the best video on the subject I have seen. Thanks!!!
Very nice router table. In my street lived a carpenter. He was a genius, he made all of their machines made of wood and worked on them all his life until retirement. I have one of his machine. but a replica made of metal. Machinists have copied his machines, and made for other people
Another tip i've found very useful was cutting about 1/16th off the bottom of the adjustable face, or even a rabet allowing them to float a bit to clear the sawdust or chips from pushing your projects out from the bit during heavy use.
Although I keep adding accessories I've finished my router table using your basic concept for the table build and it came out great. Thanks for all your help!
@Zaizas Yeah...I've been noticing problems with it too. The batteries don't seem to hold a very long charge anymore and the drill is making some weird sounds. Can't complain too much, I've gotten a lot of years out of it. I'll take a look at the DeWalt. Thanks!
The Kreg router plate instructions show an easier way to cut out the opening. You surround the plate with 4 boards so it's a rectangle, then use a 1.5 inch forstner drill bit to drill the corners. Then you simply cut straight lines along the board edges up to the circles. I think you can cut out most of the waste, then use a template bit on the router to follow the boards on top. EDIT: I did it this way, and it worked well. I decided to use the router to cut the straight parts along the boards, but my first attempt screwed up because I didn't do a good job keeping the router vertical. It's hard to do with the standard base, so I ended up using a temporary router table to route the pattern, then cut the melamine the same way. I wasted a bit of MDF learning how to make mistakes, but that's OK. It all worked well in the end. Now for the fence, then the cabinet.
I really enjoy your channel. Your projects are quality yet not overly difficult, and you’re good at explaining to us novice wood workers. And it’s a Bunus that you’re a Niner fan. Go 49ers
I built basically the exact same style of fence for router table too. only thing I did different was the clamps. instead I used T-track. routed 2 3/4" wide slots and used the star knobs to hold the fence in place. the t-track goes out the back the table so you can remove the fence too.
Steve, What’s up dog? I have been watching your videos since you started posting them. Way way way long ago. I do confess however I have missed chunks of videos over time. There are lots of great woodworking channels out there. But I keep coming back! You have some great classic stuff like magic pencil holders that I build with my grandkids. I am back looking at your router table split fence. Thanks for being there when we all could use some sage advice as well as humor.
Hi Steve, this is my favorite video on Router table. I tried to find the plans but couldn't. Please tell me how high to make the front and back fences, thank you.
Steve, can you also make a video on how to make a simple router table and fence for a laminate trimmer? Nothing fancy as this video but something useful for DIYers to make mouldings using the trimmer. I would be forever grateful to you if you do. You make terrific videos!
What stops tear outs best is painters tape. Be sure that your finish side is facing up on your table saw or if you're using a router table then be sure to move your router left to right to prevent tear out. But most of all be sure you have sharp tools. I personally would use formica for the top its more durable. stay safe and have fun! The Wood Engineers work shop.
The moment I saw the miter slot at the start of this video, I wondered, "How did he make sure that it was parallel to the fence?" Brilliant, simple solution. I'm going to be getting a router soon, and yours is the best design for a table I've seen so far.
So I went ahead and made a fence for my router table a lot like yours after your design I tried to straight edge a board but I think I may have been doing something wrong when you have time did you run through how to use your router table as a jointer
I'm so inspired by your work! I love woodworking and you break things down pretty easily for beginners like myself. I know a lot of people knock your energy, but I am a fan of who you are. The way you bounce around when you talk is exactly how my husband is normally (super ADD/ADHD hubby) and you are obviously extremely passionate about what you do which makes the woodworking bug even more infectious. Kudos and thank you for the many, many videos you have put together. I originally wanted to do a very simple router table, a hole with a fence basically but this seems doable and I'm going incorporate a lot of it. Thanks again and best wishes from California (Mystery Spot bumper sticker spotted!! :-) )
Only comment I have (on top of the whole debate around lifts) is that you could make the sliding parts of the fence with, for example, a 45 angle on the ends near the router bit. That way you can clamp small self-made insert plates between these two jaw-like sliders. These insert plates could then be routed with various router bits. This way you would have inserts that provide maximum support when routing smaller pieces of wood (i.e. the hole in your fence would be the same shape as the bit).
Looking really good Steve, I just landed a good sized shop not far from home for the price of the electricity only ,so I am hoping to copy your router table. On my current router setup I am using an old car jack with a plate welded to it to hold the bottom of the router it gives a great degree of precission to lifting.
@Sully800 I should have just called it a right triangle. My grade school math teacher is somewhere screaming at me. (Well, actually, she's probably dead by now and if there is any screaming, it's "get me out of this coffin!")
Excellent video, Steve ... you pointed out in previous video that you had a Craftsman router table - so do I - yet, my friend who gave it to me lost (how I have no clue) the fence that goes with it. What's the best way to make a fence that'd be safe and useful much as the fence you made for the router table of March 16, 2012? Do you have a video to help those of us who acquire tools, like the router table, that has missing parts and how to go about creating safe replacements? Thanks for your help as I know this video is what, 8 years old!!
My minimum list would be circular saw, (not the cheapo brands), table/bench saw, random orbit sander, 10" mitre saw, router, drills (cordless and a small drill press) and jigsaw. You'll be amazed at the variety of work you can do with these. Even better would be compressor and nail guns(brad, finishing, stapler etc), router table, reciprocating saw, vacuum, belt sander, electric planer and of course, good squares, chisels, levels, nail punches and.... anything else you think of.
I'm not sure if it's because I'm lazy or i tighten the collets too much. But I like the ring for setting the depth on the router you use. My question is this. Is it a simpler setup for a router newbie like me?
hi Steve, just built that router table fence and adapted it fix it on my table saw fence and it is just wonderful ! you re an inspiration :D Jon all the way from France
Speaking of lifts, anyone building a router table might want to consider the lift on John Heisz's ibuildit.ca. I built that lift, and it works beautifully. A crank on the front of the table lifts the router smoothly and effortlessly. The router can be lifted all the way to the top allowing both wrenches to be used without restriction from the top of the table. I built a fence similar to the one described in the above video.
Have you considered adding T-Track for the fence to the table, about 8 and 3/4 in from the sides? It seems like it would assist when moving the fence, making the movement smoother. With miter bars it would move like a table saw sled, easing positioning.
@JorrellEmerick Matthias's router lift is a work of art. I have his plans and definitely recommend buying them. He provides you with every last detail of the build. Alas, it's a bit more than this mere mortal wants to tackle, so I am going to attempt the ShopNotes lift.
Hi Steve, I know this is way back in history but I'm start out and find myself lacking in knowledge. My question is how do you machine / router the MDF panel? Any advice would be helpful as I want to make a similar table.
Great project Steve. I used your basic design with a few modifications. I made mine quite a bit taller since I have a bad back and wanted to not have to bend at all. I also added extra drawers and moved the switch to the side.
Excellent router table and instructions! I've been trying to draw up ideas for a good router table that won't break the bank with materials. I think the melamine will do just fine, now to get started...
Really like the way you made the clamps for the fence, very nice! Also noted your sign: "cleanup boy wanted". I told my wife that with her excellent organizational skills, I could really use her help in my shop (including cleanup). She told me absolutely that was not going to happen.
Great idea and easy to understand instructions and reasoning. Not certain why the template and then have to make the cut again? Also, could you not just make the top hinged to the base instead?
Is that plate universal ? I just bought a erbrour 380 2100w plunge and new to it would like to make a bench 4 it that bench looks great if it is universal where did u buy it from? Thanks
Now that you've had your router lift for a few months, what do you think? Matthias has the ability to tighten the vertical movement on his lift to avoid any kind of movement during a cut. I don't think the Shop Notes version does. Has this been an issue at all? ~Jarod
So complicated! But anyhow, I love watching your videos because you are simply fun to watch. I noticed here that you are holding yourself from laughing, as you normally do in your newer videos. Steve, did you know you have comedic talent just waiting to come out?
I liked your videos very much and helpful even for a veteran woodworker like myself, A lot of very good tips to making your own jigs and such which work well and a lot cheaper then main name brand products which mostly you pay for the name, Not sure below in your comments what video they are viewing of yours but it sure isn't Wi-Fi for a computer, lol unless they intend on building a wooden router and wish for internet out of it.
Thanks for sharing these the great videos with us . I'm in the process of building a fence this week . I was hoping to use star knobs for the vertical fence pieces also but will have to see if I can get enough clearance
Read somewhere to make a cut 1/4" inch cut on the underside first, flip it over, and then cut the rest of the way (set the blade a little over 1/2" deep for the second cut if you are using 3/4" thick melamine. Worked a peach for my circular saw using an edge guide I was using my Freud Diablo 60 tooth 7-1/4" blade which helps, too, although I got a TINY bit of burn (probably my fault).
I am building a router table based on some of the ideas Steve showed. One area where I am curious about his choices is in using standard machine bolts. I made a fence for my table like his and noticed right away that when fastening the wing nuts that hold the split part of the fence in position, the bolt heads turn in their sockets making tightening the wing nuts frustrating. He uses the same kind of bolts in the clamps for holding the fence to the table top. I wonder if it wouldn't make more sense to use carriage bolts or T-nuts for fastenings that won't turn when you're trying to tighten things down. Or am I missing something here?
Steve do you have any tips on how to lay out a workshop as far as the work area for your tools hanging over the bench what kind of tools you should get
For You all wanting to try this. Making your own MDF insert jig to be a good fit for your Kreg router table insert is very hard to do. JessEm Tools sells a 91/4 X 11 3/4 jig made specifically for this project. You'll save money in the long run because your cuts will never be precise using a jig saw and sand paper. Happy building everyone
Well done again sir!! I've been wanting to get back into woodworking, got some of my tools to start but I've been watching some of your videos getting inspired thank you. I know this is an older video but please keep it up because i want to make this after i get a few other things done. You make it all seem so simple but i know i have a learning curve to go through and will be wasting some wood because I'll miss cut. LOL
Nice video. With the mannerisms you portray I thought I was listening to Norm Abram for a bit. You must have watched him as much as I have over the years.
I think your woodworking is great (I'm jealous). Your designs are simple and functional and beautiful at the same time. Thank you for making this video.
Came here for fence ideas and wasn't disappointed - some great time-savers and design thoughts in there. Sending many thanks from deepest Scotland.
Mr. Chase changed my mind about router tables. RIP. He was my hero.
Thanks for coming up with the most versatile RT design, I searched the net for a better design ,couldn't find one as simple and functional as yours so I copied it except I didn't drill the fence from the front,instead ,I used 4 female inserts in the back,everything else is exactly the same. two thumbs up to you Mr Ramsey.
Steve, I made my router table as I wrote to you about. After watching you table, I now find myself ready to rework my table with some of your great ideas.
GREAT JOB and also very nice to look at.
Thank you so much Steve for taking your time to make these videos. They are super helpful to us guys who are just getting into wood working. People like you who are selfless in doing this is just one of the reasons that make this world great. My Dad never spent any time with me to teach me about this craft so I thank you. I think you are a truly great craftsman. Robert
I appreciate your practical approach. I've watched a number of these "tutorials" on router table construction. Yours is simple and well-edited. No superfluous comments. The simple joinery makes goods sense for a simple, strong cabinet. Thanks!
I am seriously impressed with your level of productivity. As a new years resolution I determined to make a router table it is now just after mid year and I have a router mounted on a plate and some components for the fence, a table frame and not much else.
I just ran across this and see where it is now an 8 year old video. But a very good one. Thanks for leaving it up. The best I have watched on a Router table.
One thing I favor about Steve's vids are he doesn't use 18 different expensive tools to complete his pieces. Just alot of know how and creativity.. nothing against lots of fancy tools just I can't translate them to my projects at the moment! Thanks Steve.
Steve, I built this table today. It works great and looks as good as yours. Thank you for the quick solution.
I enjoyed your videos. You are a great trainer, your instructions really simplify projects.
Just discovered this video. I've watched several of these on the same subject and yours is miles ahead of everything else I've watched. Well done and thank you.
Steve you have a great sense of humor. Noticed your Porter Cable router. I upgraded to larger Porter Cable router and a router table.a few years The table had over 300 part with all the hardware. Assembly was a bit overwhelming.I gave the table to a friend whose an engineer. Enjoy watching your videos. Thank You
Great!!! Never used a router before. Had one but never used it .Now half way to making my table top ( - wish I had bought the insert you recommended.)
Very good vidio - clear, and easy to follow. Many thanks.
bill
UK.
This is a great teaching tool. Your explanations and thought process are really, really helpful. This is the best video on the subject I have seen. Thanks!!!
Very nice router table. In my street lived a carpenter. He was a genius, he made all of their machines made of wood and worked on them all his life until retirement.
I have one of his machine. but a replica made of metal. Machinists have copied his machines, and made for other people
Another tip i've found very useful was cutting about 1/16th off the bottom of the adjustable face, or even a rabet allowing them to float a bit to clear the sawdust or chips from pushing your projects out from the bit during heavy use.
Although I keep adding accessories I've finished my router table using your basic concept for the table build and it came out great. Thanks for all your help!
@Zaizas Yeah...I've been noticing problems with it too. The batteries don't seem to hold a very long charge anymore and the drill is making some weird sounds. Can't complain too much, I've gotten a lot of years out of it. I'll take a look at the DeWalt. Thanks!
The Kreg router plate instructions show an easier way to cut out the opening. You surround the plate with 4 boards so it's a rectangle, then use a 1.5 inch forstner drill bit to drill the corners. Then you simply cut straight lines along the board edges up to the circles. I think you can cut out most of the waste, then use a template bit on the router to follow the boards on top.
EDIT: I did it this way, and it worked well. I decided to use the router to cut the straight parts along the boards, but my first attempt screwed up because I didn't do a good job keeping the router vertical. It's hard to do with the standard base, so I ended up using a temporary router table to route the pattern, then cut the melamine the same way. I wasted a bit of MDF learning how to make mistakes, but that's OK. It all worked well in the end. Now for the fence, then the cabinet.
I really enjoy your channel. Your projects are quality yet not overly difficult, and you’re good at explaining to us novice wood workers. And it’s a Bunus that you’re a Niner fan. Go 49ers
You are the men! Tnx, for all your videos,they have me help me verry much!!!!
That's a nice table and fence. Great job Steve.
I built basically the exact same style of fence for router table too. only thing I did different was the clamps. instead I used T-track. routed 2 3/4" wide slots and used the star knobs to hold the fence in place. the t-track goes out the back the table so you can remove the fence too.
Steve, What’s up dog? I have been watching your videos since you started posting them. Way way way long ago. I do confess however I have missed chunks of videos over time. There are lots of great woodworking channels out there. But I keep coming back! You have some great classic stuff like magic pencil holders that I build with my grandkids. I am back looking at your router table split fence. Thanks for being there when we all could use some sage advice as well as humor.
Great vid Steve. Picked up some great tips I never would have THOUGHT OF IN A MILLION YEARS.
That is a thing of beauty! Great table.
Can't say thanks to you enough! Truly awesome that you share your builds!
Nice. Simple solid and effective. Its given me some ideas thanks.
That fence looks really good, like the clamping system, never thought of that.
nicely done ... I am looking for a router to buy and thanks to you I know what to do with it when I buy it...
Hi Steve, this is my favorite video on Router table. I tried to find the plans but couldn't. Please tell me how high to make the front and back fences, thank you.
Nice Steve. That is a good looking router table. Can't wait to see it in action.
Watch it Steve you are approaching immortality.
It looks great. Well done
you are the mad router table genius.
Saludos amigo desde PUERTO RICO William... he aprendido varios trucos contigo y los he aplicados en mis trabajos muy buenos Dios te bendiga saludos!!!
This is wonderful packaged knowledge, that works well because its cheaper than a real thing that costs mayhem dollars.
Parabens, não perco seus videos Steve, moro no Brasil.
Steve, can you also make a video on how to make a simple router table and fence for a laminate trimmer? Nothing fancy as this video but something useful for DIYers to make mouldings using the trimmer. I would be forever grateful to you if you do. You make terrific videos!
What stops tear outs best is painters tape. Be sure that your finish side is facing up on your table saw or if you're using a router table then be sure to move your router left to right to prevent tear out. But most of all be sure you have sharp tools. I personally would use formica for the top its more durable. stay safe and have fun! The Wood Engineers work shop.
The moment I saw the miter slot at the start of this video, I wondered, "How did he make sure that it was parallel to the fence?"
Brilliant, simple solution.
I'm going to be getting a router soon, and yours is the best design for a table I've seen so far.
Great video. I like how you edited it through the whole process of making the top and fence.
Excellent travail, très bien expliqué; Nice ,very nice job. Congratulations Steve !
Je vais aussi faire le "lift" cette semaine.
Thank you from France
So I went ahead and made a fence for my router table a lot like yours after your design I tried to straight edge a board but I think I may have been doing something wrong when you have time did you run through how to use your router table as a jointer
I'm so inspired by your work! I love woodworking and you break things down pretty easily for beginners like myself. I know a lot of people knock your energy, but I am a fan of who you are. The way you bounce around when you talk is exactly how my husband is normally (super ADD/ADHD hubby) and you are obviously extremely passionate about what you do which makes the woodworking bug even more infectious. Kudos and thank you for the many, many videos you have put together. I originally wanted to do a very simple router table, a hole with a fence basically but this seems doable and I'm going incorporate a lot of it. Thanks again and best wishes from California (Mystery Spot bumper sticker spotted!! :-) )
Only comment I have (on top of the whole debate around lifts) is that you could make the sliding parts of the fence with, for example, a 45 angle on the ends near the router bit. That way you can clamp small self-made insert plates between these two jaw-like sliders. These insert plates could then be routed with various router bits. This way you would have inserts that provide maximum support when routing smaller pieces of wood (i.e. the hole in your fence would be the same shape as the bit).
Looking really good Steve, I just landed a good sized shop not far from home for the price of the electricity only ,so I am hoping to copy your router table. On my current router setup I am using an old car jack with a plate welded to it to hold the bottom of the router it gives a great degree of precission to lifting.
@Sully800 I should have just called it a right triangle. My grade school math teacher is somewhere screaming at me. (Well, actually, she's probably dead by now and if there is any screaming, it's "get me out of this coffin!")
Dang dude...thats dark
It's probably too late now, Steve.😄
Big fan of the channel....you’ve taken me from literally zero to actually selling some bullshit yet functional shop furniture
Thank you
Excellent video, Steve ... you pointed out in previous video that you had a Craftsman router table - so do I - yet, my friend who gave it to me lost (how I have no clue) the fence that goes with it. What's the best way to make a fence that'd be safe and useful much as the fence you made for the router table of March 16, 2012? Do you have a video to help those of us who acquire tools, like the router table, that has missing parts and how to go about creating safe replacements? Thanks for your help as I know this video is what, 8 years old!!
My minimum list would be circular saw, (not the cheapo brands), table/bench saw, random orbit sander, 10" mitre saw, router, drills (cordless and a small drill press) and jigsaw. You'll be amazed at the variety of work you can do with these. Even better would be compressor and nail guns(brad, finishing, stapler etc), router table, reciprocating saw, vacuum, belt sander, electric planer and of course, good squares, chisels, levels, nail punches and.... anything else you think of.
Hello Steve. Paradni a jednoduchy. Zdravi Tachov (Czech Republic)
Man - you are one talented guy. Great stuff - very inspiring!!
I'm not sure if it's because I'm lazy or i tighten the collets too much. But I like the ring for setting the depth on the router you use. My question is this. Is it a simpler setup for a router newbie like me?
That miter slot "mistake" turned out to be a great step! Great vid Steve.
Very instersting, I am going to make one.Thanks Steve
Great work so far!
hi Steve,
just built that router table fence and adapted it fix it on my table saw fence and it is just wonderful !
you re an inspiration :D
Jon all the way from France
Speaking of lifts, anyone building a router table might want to consider the lift on John Heisz's ibuildit.ca. I built that lift, and it works beautifully. A crank on the front of the table lifts the router smoothly and effortlessly. The router can be lifted all the way to the top allowing both wrenches to be used without restriction from the top of the table. I built a fence similar to the one described in the above video.
I am aloyal fan, you make woodworking fun. Keep up the good work.
Have you considered adding T-Track for the fence to the table, about 8 and 3/4 in from the sides? It seems like it would assist when moving the fence, making the movement smoother. With miter bars it would move like a table saw sled, easing positioning.
@JorrellEmerick Matthias's router lift is a work of art. I have his plans and definitely recommend buying them. He provides you with every last detail of the build. Alas, it's a bit more than this mere mortal wants to tackle, so I am going to attempt the ShopNotes lift.
looks great Steve, nice job!
ciao, che banco sega usi
It's so entertaining to watch, even without volume
Hi Steve, I know this is way back in history but I'm start out and find myself lacking in knowledge. My question is how do you machine / router the MDF panel? Any advice would be helpful as I want to make a similar table.
great editing! it's a pleasure to watch this
Great project Steve. I used your basic design with a few modifications. I made mine quite a bit taller since I have a bad back and wanted to not have to bend at all. I also added extra drawers and moved the switch to the side.
Excellent router table and instructions! I've been trying to draw up ideas for a good router table that won't break the bank with materials. I think the melamine will do just fine, now to get started...
Very nice work.
I love your brothers videos...
Possibly a stupid question, but what is the purpose of installing the T-track on the top half of melamine fence????? Thanks Steve!!!
The link for the plans takes you to the website where there are no plans for this.
Really like the way you made the clamps for the fence, very nice!
Also noted your sign: "cleanup boy wanted". I told my wife that with her excellent organizational skills, I could really use her help in my shop (including cleanup). She told me absolutely that was not going to happen.
Just built a similar one using your ideas, thanks Steve.
Dude I love these videos. Great attitude and a great way to display your work. Keep it up!
Outstanding video!!!
Great idea and easy to understand instructions and reasoning.
Not certain why the template and then have to make the cut again?
Also, could you not just make the top hinged to the base instead?
Is that plate universal ? I just bought a erbrour 380 2100w plunge and new to it would like to make a bench 4 it that bench looks great if it is universal where did u buy it from? Thanks
Great table/video.
Now that you've had your router lift for a few months, what do you think? Matthias has the ability to tighten the vertical movement on his lift to avoid any kind of movement during a cut. I don't think the Shop Notes version does. Has this been an issue at all? ~Jarod
Trying to locate the free plans for the fence - do you have those available?
this is something ive been wanting to build for a couple of years now. thanks for the inspiration steve!!🍻
So complicated! But anyhow, I love watching your videos because you are simply fun to watch. I noticed here that you are holding yourself from laughing, as you normally do in your newer videos. Steve, did you know you have comedic talent just waiting to come out?
If you would build it today would you still split the top and bottom of the front?
I liked your videos very much and helpful even for a veteran woodworker like myself, A lot of very good tips to making your own jigs and such which work well and a lot cheaper then main name brand products which mostly you pay for the name, Not sure below in your comments what video they are viewing of yours but it sure isn't Wi-Fi for a computer, lol unless they intend on building a wooden router and wish for internet out of it.
Thanks for sharing these the great videos with us . I'm in the process of building a fence this week . I was hoping to use star knobs for the vertical fence pieces also but will have to see if I can get enough clearance
Read somewhere to make a cut 1/4" inch cut on the underside first, flip it over, and then cut the rest of the way (set the blade a little over 1/2" deep for the second cut if you are using 3/4" thick melamine. Worked a peach for my circular saw using an edge guide
I was using my Freud Diablo 60 tooth 7-1/4" blade which helps, too, although I got a TINY bit of burn (probably my fault).
I am building a router table based on some of the ideas Steve showed. One area where I am curious about his choices is in using standard machine bolts. I made a fence for my table like his and noticed right away that when fastening the wing nuts that hold the split part of the fence in position, the bolt heads turn in their sockets making tightening the wing nuts frustrating. He uses the same kind of bolts in the clamps for holding the fence to the table top. I wonder if it wouldn't make more sense to use carriage bolts or T-nuts for fastenings that won't turn when you're trying to tighten things down. Or am I missing something here?
Steve do you have any tips on how to lay out a workshop as far as the work area for your tools hanging over the bench what kind of tools you should get
I love your videos
منتهى الروعه شكرا
Awesome project. I'm kinda a hand tools guy, but this looks like it is going to be a very capable tool!
For You all wanting to try this. Making your own MDF insert jig to be a good fit for your Kreg router table insert is very hard to do. JessEm Tools sells a 91/4 X 11 3/4 jig made specifically for this project. You'll save money in the long run because your cuts will never be precise using a jig saw and sand paper. Happy building everyone
Hey.... great Job! I would take a car-jack for the lifter! its precise and very solid! and you can easy remove the crank every time!
man today I built a router table top out of the same malamin stuff and it tore out as hell!
Nice router table Steve and nice video!
Greets
Well done again sir!! I've been wanting to get back into woodworking, got some of my tools to start but I've been watching some of your videos getting inspired thank you. I know this is an older video but please keep it up because i want to make this after i get a few other things done. You make it all seem so simple but i know i have a learning curve to go through and will be wasting some wood because I'll miss cut. LOL
Nice video. With the mannerisms you portray I thought I was listening to Norm Abram for a bit. You must have watched him as much as I have over the years.
Steve, This has been a great help to a newbie like me, I appreciate your explanations.