How to Replace Rear Upper Control Arms 2003-2007 Honda Accord

Buy Now!
New Control Arm with Ball Joint from 1AAuto.com 1aau.to/ia/1ASRU00069
This video shows you how to install new rear upper control arms from TRQ on your 2003-2007 Honda Accord. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.
This process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord
Tools you will need:
• Pry Bar 1aau.to/oXR/1AXAA00020
• 10mm Socket 1aau.to/obke/1AXAA00017
• 14mm Socket 1aau.to/obFy/1AXAA00015
• 17mm Socket 1aau.to/obFy/1AXAA00015
• 19mm Socket 1aau.to/oan7/1AXAA00043
• Needle nose pliers 1aau.to/oE5/1AXAA00051
• Needle nose pliers 1aau.to/oE5/1AXAA00052
• Pliers
• 1/2 Inch Impact Gun 1aau.to/ovi/1AXAA00252
• 3/8 Inch Impact Gun
• Ratchet 1aau.to/obI7/1AXAA00016
• Torque Wrench 1aau.to/oaNo/1AXAA00044
• 1 Inch Wrench
• 1-1/16 Inch Wrench
• Gloves 1aau.to/oaoY/1AXSS00048
• Safety Glasses
• Floor Jack 1aau.to/oacp/1AXAA00068
• Hammer
• Jack Stands 1aau.to/oZe/1AXAA00065
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@christophergrandison5365]

Was looking for that type of job for the longest while. You make it look quite easy and understandable.

[@Celestial_Nick]

Absolutely no coincidence this is here and mine snaps… very inspirational while the parts are in transit.

[@Boomcityz]

Nice video. Ball joint definitely does not pop loose like this video. 3 hours in with pry bars and pb blaster 😅

[@JasonCarmichael]

Thanks for the Vid.
I am about to do this with my froo froo version of the Accord, the Acura TL. (Except it is way over-complicated, but this particular part is the same)

[@witmoe]

Good deal