How to Fix the Adobe Premiere 0% Export issue - Rendering Required Audio Files - Chap Tech Support

Поделиться
HTML-код
  • Опубликовано: 4 дек 2024
  • ИгрыИгры

Комментарии • 143

  • @IDaiszy
    @IDaiszy Год назад +16

    Tip: You can right click an audio clip in the sequence, select Properties (towards the bottom of the list) and then set the sequence to the same bitrate. Sometimes you don't want to make a new sequence and copy over what could be a hundred GB of clips.
    Thanks for the help, it worked instantly!

    • @ChapC_Creates
      @ChapC_Creates  Год назад +3

      You are absolutely right... For those who are lazy or are unsure what theyre doing, my solution probably works better. But yours the better solution!

    • @Joopie101
      @Joopie101 5 месяцев назад +2

      I cant see how i can change the bitrate of a sequence, any tips?

    • @markariail340
      @markariail340 5 месяцев назад +1

      @@ChapC_Creates @iDaiszy Chap, thanks for the video---I, too was searching the heavens and earth for a solution and I found it here. @iDaiszy, I'm adjusting the bitrate just as you are...works perfectly!!!!

    • @gamingU
      @gamingU 3 месяца назад +1

      GOD thanks for dropping this comment you saved my hours from being wasted

    • @Retro_Riftz
      @Retro_Riftz 12 дней назад

      it worked... thanks mann!!!

  • @13thandPark
    @13thandPark Год назад +10

    IT WORKED AND I DIDNT HAVE TO DO A BLOOD SACRIFICE, THANK YOU!!

  • @NinoIsHere
    @NinoIsHere Год назад +2

    Hello,
    I'm Going through as many videos about this topic to post my solution hopefully to help some of you struggling souls out there for premier.
    DISCLAIMER: My problem may not be the same as yours but this was my solution. Please don't leave unnecessary hate as I'm only trying to help.
    Problem: ANYTIME I want to export it will be stuck at 0%
    Source of my Problem: Over Nested Audio tracks
    Solution: Select ENTIRE audio mix and right click then click render and replace
    After doing this I was able to successfully return to exporting FAST, good luck to you fellow Creators!

    • @ChapC_Creates
      @ChapC_Creates  Год назад

      Awesome, glad this worked for you! No hate in our comment section.

  • @joelkimble6348
    @joelkimble6348 Год назад +3

    thank you! I was editing a live event and was getting stuck in "audio rendering" when I went to export. I watched this video and then did my own fix - the audio from the Zoom h6 was set to 44.1 kHz, however the scratch audio from my camera (the first clip I dragged into the sequence) was 48kHz. I changed the sequence settings to match the Zoom audio, deleted my camera's scratch audio and it worked perfectly.

    • @ChapC_Creates
      @ChapC_Creates  Год назад +1

      Glad it helped! I am so happy this video is actually helping out people. Love it! Makes you thinkg why premiere doesnt have better warnings or error description, dont't ya think?

    • @The80sFreak.
      @The80sFreak. Год назад

      This worked for me too!!

    • @rachelkosminsky1731
      @rachelkosminsky1731 Год назад

      OMG! Thank you!!! This fixed everything!!

  • @ickyspanish
    @ickyspanish 7 месяцев назад +2

    Thanks man. What an easy fix. You were the only one with the right solution.

    • @ChapC_Creates
      @ChapC_Creates  7 месяцев назад +2

      These comments never get old and really make my day! Glad I could help

  • @themadears
    @themadears Год назад +2

    yes, make a new sequence and paste everything. all worked fine! Thanks

    • @somayog
      @somayog Месяц назад +1

      everyone, just read this!

  • @shotwithscott
    @shotwithscott 9 месяцев назад +1

    Not all heroes wear capes! Thanks mate, i waited hours for Media encoder to work, then found this. Worked straight away
    Subbed.
    THANK YOU

    • @ChapC_Creates
      @ChapC_Creates  9 месяцев назад

      Thank you my dude, this videos keeps on reaching those in need. Love it.

  • @mistereb
    @mistereb Год назад +4

    Thank you Chap - that worked, after some pretty laborious reconstruction of an entire feature film sequence. But I can't believe that Adobe allow this bug to go unfixed - we pay hundreds a year for this $hit. It's things like this and the Quicktime Gamma bug that is still not fixed that really boil my pi$$. After years of learning and '000s of pounds invested, I thought myself wedded to Adobe, but I have to say that Davinci is looking pretty good right now...

    • @ChapC_Creates
      @ChapC_Creates  Год назад

      I feel ya, what bothers me most are random crashes in première. Nothing more annoying then losing hours of work. Glad i could help bud!

  • @TigerSpreadsheetSolutions
    @TigerSpreadsheetSolutions Год назад +1

    Looked at the bitrate in the sequence settings and, as you implied, it was problematic. Changed the bitrate to match that of the footage and voila ... thank you so much!

  • @DavolafShorts
    @DavolafShorts Год назад

    BRO I LOVE YOU FOR THIS VID!!! SAVED ME SO MUCH TIME : )

  • @jocelynxvlla
    @jocelynxvlla Месяц назад +1

    thank you so much T--T i have an exam going on and its 2 AM after my hardwork and i need to submit it in class but this problem occured :") i was stressing out. you really helped me. bless you!!

    • @ChapC_Creates
      @ChapC_Creates  Месяц назад

      Honestly the best part of having this channel are comments like these. SOOO glad I could help!

  • @Kildat1
    @Kildat1 Месяц назад +1

    Yup, just needed to make the new sequence and it worked, thx

    • @ChapC_Creates
      @ChapC_Creates  Месяц назад

      Great! Glad to hear this video is still reaching folks.

  • @pStabs
    @pStabs Год назад +2

    This was exceptionally helpful. The only part that sucks is that I have to re-edit everything. BUT at least this fixes it! Thank you!

    • @ChapC_Creates
      @ChapC_Creates  Год назад

      No problem! But maybe you have to re edit? Try to drag the new footage into the create new sequence icon, and then copy paste all the edited parts into the new sequence. This way you can keep using the old clips.

    • @MrMohamedSakr
      @MrMohamedSakr Год назад

      that part annoys the hell out of me too... -_- i was hoping for solution before re-editing 😓

    • @Fission_studios
      @Fission_studios Год назад

      my timeline is 3hours. This will be hell

  • @christhescientist
    @christhescientist Год назад +6

    Am I missing something? I don't understand what you've done in this video, what did you drag into that section? your video covers the section. I appreciate you taking the time to make this video, but you have to make sure beginners and intermediate people understand. The jokes are fine but the main explanation is really unclear. Please respond explaining what you did.

    • @ChapC_Creates
      @ChapC_Creates  Год назад +1

      Drag the new footage to 'create new sequence' instead of using the new footage in an old sequence.

  • @ironbeastreacts
    @ironbeastreacts Год назад +1

    Excellent video, simple fix and saved me hours of wasted rendering time. thanks!!!

    • @ChapC_Creates
      @ChapC_Creates  Год назад +1

      no youve got some spare time for a well derserved nap... or video games.... Id choose video games

  • @Alistocrat
    @Alistocrat 11 месяцев назад +2

    Unfortunately your method didnt work for me, but I managed to export by changing the bitrate in the sequence settings, however it only exports the video with no sound, anyone know how to fix this?

  • @aashaaronstudios9328
    @aashaaronstudios9328 Год назад +1

    You are a LEGEND and a good laugh too! Thx for being THAT GUY who creates a solution! : ))))

    • @ChapC_Creates
      @ChapC_Creates  Год назад

      Glad it helped and made u laugh. Love it that this vid keeps on helping folks.

  • @focusmedia2465
    @focusmedia2465 11 месяцев назад

    I just had the same issue and I'm not quite sure what happened to fix it, but I tried exporting just the audio alone as a WAV file. At first, it seemed to be stuck again at 0% but then after about 60 seconds or so, it completed the render instantly. After that, the only thing I did was try and export it as normal H.264 without importing back in the WAV file or doing anything different and it just worked as normal that time. It felt like the audio was stuck and it somehow became free after pushing it to render the audio alone? I have no clue, but hopefully this helps someone else that might experience this random bug.

  • @Rarefied-Air
    @Rarefied-Air Год назад

    Thank you for uploading this this actually fixed it for me. Idk why Premiere is so difficult

  • @MichaelTitera
    @MichaelTitera Год назад +1

    Thanks for the video; loved the blood! :) Because I had multiple audio files recorded at a different Hz than the export setting, I found the easiest thing to do was to just send the export to the Media Encoder. It resolved the issue right away. Not sure why Premiere couldn't do the same thing. Thanks again for the tip!

  • @GARMATA_SYNDICATE
    @GARMATA_SYNDICATE 8 месяцев назад

    You saved my day! Thanks!

  • @Tonceitoys
    @Tonceitoys Час назад

    Okey, this happened to me and found another solution. I created a new project file, selected everything in the timeline from the project that was stuck at 0% encoding, copy and pasted everything onto the new project file and exported. It actually encoded everything no problem!
    Premiere Pro is weird...

  • @thereanimator926
    @thereanimator926 9 месяцев назад

    Thanks I thought I was going mad having to wait 15 - 20 mins for it to start rendering 👍

    • @ChapC_Creates
      @ChapC_Creates  8 месяцев назад

      I know right! So weird how there is no alert or message in the app itself.

  • @nkeditzx10
    @nkeditzx10 Год назад +1

    there is another reason it is the soundless audio layer linked with your video. my issue has been fixed
    by unlinking the audio layer and deleting it

  • @CogAMV
    @CogAMV Год назад +2

    Just thank you man, the jokes and the quick tuto, jus thanks

    • @ChapC_Creates
      @ChapC_Creates  Год назад

      Ur welcome! Love it how the video keeps on helping folks

  • @9ellar
    @9ellar Год назад +4

    there is nothing to fix it. U just have to wait and boom! it will starts rendering.

  • @nickheymann5517
    @nickheymann5517 Год назад +2

    Didn't fix it for me, unfortunately, but thank you for the video nonetheless. Might be some faulty plugin for me.

    • @ChapC_Creates
      @ChapC_Creates  Год назад

      Hmm thats annoying. Whenever you fixed it, lemme know. Curious about other causes

  • @animerecaproom
    @animerecaproom Год назад +1

    Worked. Thanks buddy.

  • @meshmarketer
    @meshmarketer Год назад +1

    I am not here for the gaming, but I found this to fix my problem with Premiere Pro. I liked your video and subscribed because you're fun. Good job!

    • @ChapC_Creates
      @ChapC_Creates  Год назад

      Glad it helped! It's hilarious that a video like this, that I usually don't make, is reaching all of you... thank you for the sub! I hope you enjoy all the random content on my channel!

  • @YelyzavetaLytvynova
    @YelyzavetaLytvynova 3 месяца назад

    yaaaay thank you so much! It worked!

  • @itsmorethanpoetry
    @itsmorethanpoetry Год назад

    You're a star thanks so much I was stuck for ages but this worked 🙏❤️

  • @jdm-dot
    @jdm-dot Год назад

    You are the GOAT, I love you!!

  • @lucasfakelmannbergamini1273
    @lucasfakelmannbergamini1273 Год назад +1

    Love it. Thank you ma man

    • @ChapC_Creates
      @ChapC_Creates  Год назад

      Any time! Glad I could help. Funny how they could have prevented all this confusion with a little message/warning.

  • @ronswallow
    @ronswallow Год назад +1

    Thanks! Super helpful stuff!

  • @atmosphericrecord
    @atmosphericrecord Год назад +1

    It worked! Thank you!

    • @ChapC_Creates
      @ChapC_Creates  Год назад

      Im so glad this random video is actually helping folks out! No problem!

  • @piyankchan
    @piyankchan 11 месяцев назад +1

    Thank you so much it works properly

  • @poona_wala
    @poona_wala 5 месяцев назад +1

    thanks brother it works

  • @creativereflections1283
    @creativereflections1283 Год назад +1

    Thank you! It worked

  • @StickOnHair
    @StickOnHair 3 месяца назад

    My project contains over ten thousand clips. What is the ACTUAL fix?

    • @ChapC_Creates
      @ChapC_Creates  3 месяца назад

      Depends on the project setup. I would probably use handbreak (software) to batch and convert all the files to make them have the same audio settings.

  • @cristian-apostol-films
    @cristian-apostol-films Год назад

    Hello! If you want just to render how can you change the location on rendered file ?? I cant find that information! The render process it will eat my C drive very fast!

  • @Zack-sb4bu
    @Zack-sb4bu Год назад +1

    It worked for me thank you 🙏🏼

  • @MrMohamedSakr
    @MrMohamedSakr Год назад

    so you are saying if i have different videos i merge together , i need to get them in same sequence first using HandBrake perhaps then i try again ?

    • @ChapC_Creates
      @ChapC_Creates  Год назад

      Creating a new sequence based on the main footage (mp4) will fix the problem. The problems seems to occur when you are using multiple bitrates... processing it through handbrake and make all the settings the seem should also fix it! But make sure the main sequence has the seem bitrate settings too.

    • @MrMohamedSakr
      @MrMohamedSakr Год назад

      @@ChapC_Creates I found another video explaining easier solution to match the sound bit by exporting each video as WAV format from project window setting that value say 48000 for example...i did that for all my videos and replaced the audio...worked like charm...

  • @Spigazu
    @Spigazu Год назад

    what if I need to export a video with many layers and effects, not just one clip

    • @ChapC_Creates
      @ChapC_Creates  Год назад

      I guess: pick the framerate settings of the footage you use the most? and then wait out the rest of the time thats needed.

  • @tommaye3566
    @tommaye3566 11 месяцев назад

    yeah smart guy what do i do when i have over 25 video clips. This video looks to only help if i have an uncut video and some mumbo jump pasted ontop of that

  • @Rohanthinks
    @Rohanthinks Год назад

    I am importing video so it is coming rendring required audio file

  • @Moztreet
    @Moztreet Год назад

    Man thanks!

  • @ChapC_Creates
    @ChapC_Creates  Год назад +1

    The Far Cry video that caused this mess: ruclips.net/video/iJ3lPLydmts/видео.html

  • @EricLocko
    @EricLocko Год назад +1

    THANK YOU

    • @ChapC_Creates
      @ChapC_Creates  Год назад

      No problem Eric! Still makes my day the fact this video is reaching folks.

  • @Wishmaster994
    @Wishmaster994 8 месяцев назад

    THANKS

  • @imsed1449
    @imsed1449 9 месяцев назад

    thx bro, it helped

  • @ReewinddZ
    @ReewinddZ Год назад

    This havent solved it for me is there any other way?

    • @ChapC_Creates
      @ChapC_Creates  Год назад

      you tried changing the rendering engine? Are you getting different error when trying the media encoder?

    • @ReewinddZ
      @ReewinddZ Год назад

      @@ChapC_Creates i fixed it myself, but basicly it was staying at 0%, and coying and pasting is chaging all the post prod i did , so i had to work around

    • @chrisbryan2333
      @chrisbryan2333 Год назад

      @@ReewinddZcould you explain how you managed to fix this?

    • @ReewinddZ
      @ReewinddZ Год назад

      @@chrisbryan2333 i ran it into media encoder, and waited the lon run

  • @zeupa
    @zeupa Год назад

    Thank you so much!!

  • @zhubaca
    @zhubaca 26 дней назад +1

    Genius

  • @Fission_studios
    @Fission_studios Год назад

    hi, i dont get the video. My timeline is 3 hours long. i dont know what to do. can anyone help me please

    • @ChapC_Creates
      @ChapC_Creates  Год назад

      Change the bitrate of the sequence to the bitrate of the footage.

  • @TheDAITrickster
    @TheDAITrickster Год назад +1

    I LOVE YOU

    • @ChapC_Creates
      @ChapC_Creates  Год назад

      Gosh, I was thinking about telling you earlier, but I think I love you too!

  • @DIMCOCk
    @DIMCOCk Год назад +1

    Real solution

  • @hunterhexin7587
    @hunterhexin7587 Год назад

    Vacations with the family. I’m in

  • @JuanVenturer
    @JuanVenturer Год назад +1

    It worked! huhuhu thanks bro! I sub you.

    • @ChapC_Creates
      @ChapC_Creates  Год назад

      Thanks for the sub! Such a weird issue right?! Glad I could help.

  • @creativeleodaily
    @creativeleodaily Год назад

    Great Content, I will recommend you to put chapters in this video, because your video quality is amazing...

    • @ChapC_Creates
      @ChapC_Creates  Год назад

      awesome, I added a few! gonna do a double check soon

  • @OGEVERYDAY
    @OGEVERYDAY Год назад

    Thank you!!!

    • @ChapC_Creates
      @ChapC_Creates  Год назад

      No prob Olivia! These things should take away your precious time!

  • @ndaline
    @ndaline Год назад

    yo thank you

  • @JasonMorena-hi8gb
    @JasonMorena-hi8gb Год назад +1

    ah yes media encoder ! thanks man

  • @wingchunekb
    @wingchunekb Год назад +1

    Thank!!!!

  • @patrickaycock3655
    @patrickaycock3655 Год назад

    chap.c is now a tech channel? hmm.... ill send you my ps4. fix my CD drive.

    • @ChapC_Creates
      @ChapC_Creates  Год назад

      Bring m on! A few slaps on it do wonders

  • @K4wita
    @K4wita 4 месяца назад

    didnt fix it, still in 0% and i cant do nothing

    • @ChapC_Creates
      @ChapC_Creates  4 месяца назад

      hmm.. thats annoying. Does the project file include difference mp4s? What could work is download software like handbreak (fruit icons) and export all the files through this software. 9/10 times fixes the problem for me.

  • @HisAwesome244
    @HisAwesome244 6 месяцев назад +1

    THis video deserves more views than it has 😂😂😂😂😂😂

    • @ChapC_Creates
      @ChapC_Creates  6 месяцев назад

      To be honest, still getting 20 views a day from this video blows my mind. I Especially love kind comments like these 🙏🏻

  • @ThePathOfFire
    @ThePathOfFire Год назад

    Can anyone even see what the hell he clicked on?!

    • @ChapC_Creates
      @ChapC_Creates  Год назад

      Im not clicking on anything behind my camera, simply dragging footage to the “new sequence” icon that is visible in the video.

    • @ChapC_Creates
      @ChapC_Creates  Год назад

      Timestamp?

  • @loneprimate
    @loneprimate Год назад

    Be really great if you weren't sitting IN FRONT OF THE THING WE'RE MEANT TO BE LOOKING AT.

    • @ChapC_Creates
      @ChapC_Creates  Год назад

      hehe... yeah.. I noticed while edititng.. BUT I am pretty sure none of what im showing is hidden behind me though? So it should make the solution harder to understant.

  • @RussellCane
    @RussellCane 6 месяцев назад

    Ты собой закрыл! Так что ты сделал???

    • @ChapC_Creates
      @ChapC_Creates  6 месяцев назад

      英語のみでお願いします。基本的には動画で解説してます?ファイルを新しいコンポジションにドラッグするだけです。

  • @bakatsuNAMI
    @bakatsuNAMI Год назад +1

    I enjoyed that joke lol

    • @ChapC_Creates
      @ChapC_Creates  Год назад +1

      lol, just watched it myself since the edit, pretty cringe, but glad you liked it!

    • @bakatsuNAMI
      @bakatsuNAMI Год назад

      @@ChapC_Creates sometimes the funniest stuff comes from the cringe. Gave me a great chuckle regardless and just wanted to let you know that. Good luck with the future my dude! Helped me with my problem :D

  • @ABCDigital10M
    @ABCDigital10M Год назад +1

    chawal