Sun Lounger Chair - Self build project -
HTML-код
- Опубликовано: 19 июн 2021
- How to make a Sun Lounger Chair. In this video I show how I made a fixed sun lounger chair to relax on on warm Summer days. The frame of the chair is made from 50 mm x 25mm (2 x 1inch) mild steel welded together. The timber slats are made from 75mm x 35mm (3 x 1.5 inch) white deal (poplar or pine) It would be better to use a wood like cedar or oak but with the price of wood at the moment I would probably have had to remortgage to buy it. The chairs will only be out in the open for the Summer / early Autumn (fall) months so the wood I used with 3 coats of stain should last well. The slats are screwed on so if they ever get damaged or need to be repainted it is easy to remove them.
To get the angles and lengths for the chair I made a mock up with scrap timber and tested it to see if it was comfortable. I designed the chairs around me, that is why I did not show the angles or sizes as it may not suit everybody. If you are going to build your own I would suggest making a rough mock up and test the angles to suit you. I also choose not to have arm rests but you could easily add some or even a small drinks holder or table.
To make the chairs I used.......
Steel= One 7.5 Meter length of 50x 25mm per chair.
Wood= Five 4.2 Meter lengths of 75 x 35mm per chair
Screw hole caps: amzn.to/3vEU56s
I have ordered some cushions for the chairs but at the time I didn't realise they were being shipped from China so I wont have them for a few weeks so that is why there is none in the video.
I hope you enjoy watching the video and have a go making your own.
Music : "Nimbus" by Eveningland from RUclips audio library.
** Always be careful using tools and machinery**
YOU ARE IN CHARGE OF YOUR OWN HEALTH AND SAFETY.
#sunlounger #diy #selfbuild Развлечения
wonderful
Thank you very much.
Thanks everybody for watching!!
Hello Eamon
Great work in every detail!
Nice sharing
Thank you! Cheers!
What a fantastic contrast of wood color and metal. I love this design and really love the angles cut in the back of the slats. Nice job!
Thanks very much Mason.
So good
Thank you Samantha.
Definitely more videos Eamon... Still love that coin roofed bird box you did a few years ago lad. Stunning stuff again with this one.
Cheers from county Meath.
Thank you very much Nathan! I wish I had a bit more time to make more videos. Thanks for staying with the channel with the videos few and far between. Hope the weather stays good in Roscommon to enjoy these chairs 😊
Keep up the good work I love the chair
Thank you very much Colie!!! 👍👍👍
Jesus they’re pure class Eamon 😃😃😃
😂 Thanks Ken 👍
Fantastic!
Thank you very much Mark! 👍
Very nice 🖒🖒🖒🖒☺
Thank you!!!!❤
They look slick, now if the weather stays good you can top up the tan
😃 Thank you. I hope it does but I can see clouds forming as I write this...
Really nice.
Thank you!
Looks great and comfortable.
It is, I had a nice sleep in one this afternoon! 😃😃
@@EamonWalshDIY 😃
👌👏👏👏👍👍👍👍👍
Thank you.
@@EamonWalshDIY 🥰
Great design. My only addition would be some flat round metal pads added to the feet that distribute the weight so it doesn’t sink into the ground.
Thank you very much.
Молодцы!!!
Спасибо.
❤❤❤
👍👍❤
جميل
شكرا لك
Hi can you please give the dimensions even if you build that for yourself. just to have an idea thks
Hi Jed, email me at eamonwalshdiy@yahoo.com and i will send some sizes.
CRASSAVA
ахрененная лежанка, но не практичная на грунте - провалится в землю
Он удобный и не тонет в земле.