The chair design looks really nice, thank you for sharing. Just a little tip about your table saw. It seems that there are a lot of burn marks while ripping. The blade seems to be square to the top but the fence may be out of alinement by a few thousands, the far end being closer to the blade line thus producing those burn marks. It's be helpful to correct this.
Might also be because he's ripping the board before running it through the jointer, and the board looks a a good bit cupped. Beautiful work, regardless, thank you for sharing!
I enjoyed watching your video and really appreciate the craftsmanship and quality. The only thing I'd change is instead of using biscuits to join the finished seat to the left and right frame, I'd router out the left and right frame about 1/2" and slide the seat in. I'm not sure those small biscuits will support a heavy person. The wood looks alot like North American poplar.
Muy bien hecha la sillita, cuando se tiene la herramienta es super sencillo nada del otro mundo, pero si queremos algo mas original chequen al señoron hernan costa felucidades..
Beautiful chair! Just trying to be helpful but if you clean the blade on your table saw it wouldn't burn in the cuts. Other than that, great work and stay safe! Happy Building 😁
Harika bir tasarım ve işçilik. Bir şey eklemek istiyorum: Ahşap sandalye ve masalar da ayakların yere basan köşeleri alınsa daha uzun ömürlü olur görüşündeyim.
My dearest Duong, that is the expensive way of buying wood as they charge you for plainning. I always buy what we call rough sawn and take it home and plain it myself and save a packet at the same time.
@@mokongtv123 given how you made it and how sleek it looks (if it’s also comfortable to sit on), you could probably sell it for $250-$600 in a big North American city.
Good morning, everyone. First, a question: Can anyone tell me which wood was used ? It shows a very exquisite pattern and seemed to achieve a very good finishing without a lot of sanding. Second, I would go for sanding the burning marks and sharp corners before final assembly. Then, once assembled I would go for any final touch up with sanding before applying the wax finishing.
If you look closely at the video, you can see the angles. Dimensions depend on who will be sitting on the chair, so you have to decide for yourself. thank you
Excelente trabajo maestro. Gracias por compartir sus conocimientos. Saludos desde México
The chair design looks really nice, thank you for sharing.
Just a little tip about your table saw. It seems that there are a lot of burn marks while ripping. The blade seems to be square to the top but the fence may be out of alinement by a few thousands, the far end being closer to the blade line thus producing those burn marks. It's be helpful to correct this.
THANK YOU VERY MUCH!!!♡ I solved the burning problem with your advice!!! Thank you!
Might also be because he's ripping the board before running it through the jointer, and the board looks a a good bit cupped. Beautiful work, regardless, thank you for sharing!
I appreciate that you’re working safely with your saws
The craftsman was very skilled and the pieces of wood were cut perfectly.
The Master Craftsman demonstrated lessons in achieving perfection by implementing basic, simple, but organized techniques. Thanks
Thank you very much!
Absolutely stunning wooden chair design, it looks effortless! Keep up the amazing work! 🪑👏
You didnt have to say a single word but we learned so much, thank you!
I enjoyed watching your video and really appreciate the craftsmanship and quality. The only thing I'd change is instead of using biscuits to join the finished seat to the left and right frame, I'd router out the left and right frame about 1/2" and slide the seat in. I'm not sure those small biscuits will support a heavy person.
The wood looks alot like North American poplar.
Good job, but please for the dimensions
You make it looks so easy. Beautiful work.
What a beautiful chair! I want to build a pair of these 👍👍
엄청 열심히 만드세네요. 장인정신이 느껴집니다^^
좋게 봐 주셔서 감사합니다~^^
To be able sit on your Creation while sanding it is Amazing
Looks clean af.
멋지구로 테이블쏘가 추가됐네 이젠 없는게 없어~~ 👍 👍 👍
네 이제 장비 탓은 못하게 됐습니다 ^^
That is a lovely looking chair. Is there any chance you could share the plans? If you even used them.
예술이십니다 목공님~~😊👍👍
감사합니다😄👍
I've had a few close calls in the past, and I've learned the importance of wearing Softgle.
이게 뭔 소리인지
Profissionalismo puro, parabéns
Parabéns pelo trabalho de altíssima qualidade.
FANTÁSTICO, belo trabalho
Um trabalho maravilho 😮😮😮 mas perigosos com as serras excelente amigo 💯🎉🎉🎉 Deus abençoe sempre abraço.❤️❤️❤️❤️❤️👍👍👍
Muy bien hecha la sillita, cuando se tiene la herramienta es super sencillo nada del otro mundo, pero si queremos algo mas original chequen al señoron hernan costa felucidades..
Beautiful work brother ❤ from Bangladesh 🇧🇩
Look, the work was amazing, congratulations 😊
Thank you, this gave me an idea for my assignment
Hi excellent work, Do you have the design plans? What can you share or sell?
You make it looks so easy. Beautiful work.
Great skill. Hello from Vietnam!
Good job. I wish I had those machine.
Tô encanta pelo excelente trabalho linda cadeira muito reforçada 🎉🎉🎉🎉
Perfeito!!
Meus parabéns!!
좋은 하루보내세용
Amazing work 👍
Beautiful chair! Just trying to be helpful but if you clean the blade on your table saw it wouldn't burn in the cuts. Other than that, great work and stay safe! Happy Building 😁
Harika bir tasarım ve işçilik. Bir şey eklemek istiyorum: Ahşap sandalye ve masalar da ayakların yere basan köşeleri alınsa daha uzun ömürlü olur görüşündeyim.
Beautiful build. I'm curious what wood is that you used? What finish did you use?
Inspiring work! Well done.
Fantastic work Mr Lee ✊
This chair is verry good 👍
nice do you have the dimentions of this chair please ?
Beautiful I built one for my niece made half laps for the joints
❤ Sir it's amazing work and design
Kindly share the details of measurements it will help to make as perfect as you made...
👍
Do you sell the plans for this chair? I love it and want to do a project with my kids.
Awesome! Appreciate your sharing..Hello fm PNG🇵🇬
Professo muito obrigado por tudo deus abençoe sempre sua vida e tenha um ótimo ano novo
Bonita está cadeira e simples para fazer obrigado pela dica
Buen trabajo saludos de Mexico
My dearest Duong, that is the expensive way of buying wood as they charge you for plainning. I always buy what we call rough sawn and take it home and plain it myself and save a packet at the same time.
멋지십니다요^^
감사합니다^^
Trabalho fantástico. Peço pra me enviar as medidas para que eu possa fazer igual. É possível?
Agradeço muito sua ajuda...parabéns!
Beautiful work. Thank you for sharing.
Thank you for the great video
It looks excellent. But is it comfortable to sit in for more than 10 minutes?
IKR, it doesn't look sturdy at all. Dowells as support doesn't seem right.
@@KillberZomL4D42494 Those are "loose tenons", not dowels
@@PolinS76 Still doesn't look sturdy.
Add cushions.... soft... making one now.
Great work
Nice! Iam from brazilian
Very very nice as always
Все гениальное просто!
멋진 의자 좋네요.
다리 각도주실땐 도면부터 그리신 다음 하시나요 어렵네요
자투리 목재를 잘라 보면서 각도를 세팅했습니다 연습용으로 먼저 하나를 만들어 보고 부족한 부분들을 보완했습니다 감사합니다
@@mokongtv123 노력이 많이 필요 하는 군요^^ 영상보면서 많은 도움 되고 있습니다. 감사합니다.
Really Good!
Good afternoon! Please tell me at what degree of angle are the chair parts filed?
GOOD JOB BROTHER 👍🏻
Good afternoon. I really liked your work. Can you specify the dimensions of the chair parts?❤
죄송해요 도면을 만들지 않았습니다 영상을 자세히 보시면 각도들을 확인하실 수 있습니다
Muito bom, parabéns ! 🇧🇷
Great job
beautiful job!
Do you have plans for the chair?
the weight of the person whose sit on this chair will NOT be hold by the chair legs, but the weak wood pin , please correct me if i am wrong
Alat-alat yang sangat mendukung 👍
Hello sir...what machine do you use in making dowel hole...thank you..
Muchas felicidades, es posible que me puedas compartir las medididas de las piezas de este modelo de silla. Gracias
Está muy bien el trabajo pero, tiene que explicar la medidas de lo corte ..
Good workshop
Sungguh luar biasa, salam dari indonesia
merhaba. elinize sağlık güzel bir tasarım. ölçüleriniz veya kesim planınız var mı? Varsa paylaşabilir misiniz?
Really like the design. What oil do you use?
제 디자인을 좋아해주셔서 감사해요. 기존에 있는 디자인에 영감을 받아서 조금 더 단순하게 만들어 보았습니다. 제가 사용하는 오일은 한국에서 개발된 옻스테인입니다.
Great work. 💐💐
Super 👍👍👍
great skills
Great job, work with the chainsaw so be very careful
Мне кажется, что более прочнее было бы если бы на ножках для крепления сидения сделали бы пазы и вставили в них сидение .
Ver nice. You have a beautiful shop too. How much do you sell this chair for?
I made this chair for myself. So I don't know the price of this chair. What do you think is a reasonable price for this chair?
@@mokongtv123 given how you made it and how sleek it looks (if it’s also comfortable to sit on), you could probably sell it for $250-$600 in a big North American city.
Perfect 😍👌🏻
Muy bonita ...!
Que madera es ?
Good job❤❤❤
Good 👍👍👍
احسنت ..عمل لطيف جدا
Good morning, everyone.
First, a question: Can anyone tell me which wood was used ?
It shows a very exquisite pattern and seemed to achieve a very good finishing without a lot of sanding.
Second, I would go for sanding the burning marks and sharp corners before final assembly. Then, once assembled I would go for any final touch up with sanding before applying the wax finishing.
awesome craftsmanship, 10stars
Здравствуйте скажите какими ЛКМ ( красами вы пользуетесь)👍
Which types of wood used
Very nice
Need diagram
Sensacional 😀😀😀
Do you have plans for this
what is it exactly on 7 min he uses?
1 beautiful chair, what wood do you use? Could you please tell me the exact size?
If you look closely at the video, you can see the angles. Dimensions depend on who will be sitting on the chair, so you have to decide for yourself. thank you
@@mokongtv123 I see you use the domino mortise, is it okay if I use mortise & tenon joints?
I bet mortiser & tenon would be the best choice!
@@mokongtv123 Is it okay to use 2 biscuits mortise at 1 link??
@@lammocdiy4274 Hope you feel confident. That's also a good choice~
What type of wood did you use?
@@aurtisanminer2827 i think it's pinewood
Waww mantap kren
Muốn theo học . nhưng tôi là người Việt Nam không biết làm sao