How to Tin your new Weller Soldering Iron
HTML-код
- Опубликовано: 1 окт 2024
- Tinning the tip of your new Weller soldering iron is very important for preventing oxidation. The easiest way to prevent oxidation of a solder tip is to protect it with a layer of solder. Each time you clean the soldering iron and put it away, apply a fresh solder to the tip.
![Cody Johnson - I'm Gonna Love You (with Carrie Underwood) [Official Music Video]](http://i.ytimg.com/vi/yy9PuYMU29g/mqdefault.jpg)
I always start with just the tip.
Now get to bed no supper for you dirty boy
That's what she wants
I’m glad I came across this! Crazy so many beginner vids don’t tell you this!
Thank you for a great video.
What solder would you recommend for car stereo and taillight wiring ?
Could you please give me some advice. Im new to soldering and i bought a new very inexpensive solder iron and also bought some 63/37tin/lead 2% rosin core solder. No store near me sells tinning flux or regular flux. So can i tin it with what i have?
Yes, you can use what you have. The rosin is flux
I learned this in electronic class in Jr high school
Wonderful. Thank you. Cheers.
I tried carefully and gradually wait...but I didn't wait carefully enough 😅 just fucking with ya ...i Had no idea you have to do that...thanks
Thanks for the video. I have 2 questions. 1. What type of solder should you use if you are soldering with a lead free solder (with nickel, etc) that is challenging to solder with? (I've heard you should use 63/37 tin lead, for a high lead content, & the instant melt it gives). Would you agree? 2. I've seen so many different methods, it has left me wondering what is right. There are some who make it sound you should have the tip completely covered before even turning it on the first time, using "tinning flux" that has tin in it, and completely wrapping the tip in solder. Does that matter?
You can tin your tip with the leadfree solder. We use and sell aquasafe which is mostly tin and it is harder to solder with. We recommend the method we've used in the video but if you try different methods you may find a different one suits you better.
But doesn't the solder gunk up and effect heat transfer? I'm barely learning and I can't get the solder to NOT stick to my damn iron! It simply will not transfer to the circuit board.
It sounds like your tip may be oxidised. If it is, this is what will happen. You might need a new tip.
@@adamf1347 well it was a new soldering iron....just a cheap stick though. I did end up buying a better soldering station which just arrived yesterday....haven't practiced just yet. Hopefully your right
@@mrnuna4793 Good luck, just make sure it's tinned properly, even a new tip. I also received my new Weller WE1010 today (just a basic hobby level station) and will also be practising tonight. I'm no expert by any means! Fingers crossed for both of us :)
@@adamf1347 so these tips are supposedly "pre tinned "....not sure I trust that. I should still tin the tips right? And thank you for the well wishes, hopefully your new station serves you well.
@@mrnuna4793 Yes, I believe so. Mine came pre tinned, too. Most likely to keep it from oxidising while in storage until first use. But the instructions do still tell me to clean it by using the "cleaning pad" (which for me will be brass wool) and then tin it, so that's what I'll do. And thank you, also.
☺☺☺
if your new tips come pre-tinned, is there a need to tin it prior to its first use?
Even if it says pre-tinned we would still recommend you follow this process. We have found that without tinning them on the first heat-up, the tips corrode.
My new tip oxidized,. It won't accept solder, do I throw it away?
Hi, You can carefully file the oxidisation off the tip until it's shiny again and then repeat the procedure shown in this video.
If you file it, it will ruin the tip, I use an abrasive sponge
@@dirtbike9217 Like a wool cloth?
@@c.m.7037 exactly, just NOT a file or sandpaper
@@c.m.7037 like brass sponge or steel wool
... Seems to me that the first time you use the soldering gun it's going to tin itself
Hi, If the soldering iron gets to full temperature before you have tinned the tip, it will oxidize and won't accept the solder. This is why this process is so important.
@@perthartglass okay, I'm thinking back just a few weeks ago I bought a new Weller 260/200 watt. The first time I used it I was holding solder up to the tip waiting for it to become hot enough to use. I guess without even meaning to I tinned the tip...😁
@@olheghtt Lucky! Glad it worked out for you :)
What solder is he using? Looks like an aluminium rod?
This solder is an alloy of tin and lead. This solder is 50/50 as the iron will be used for stained glass. For Copperfoil work, to create a nice smooth bead of solder use 60/40.
Thank You...
i've seen other vids where people wind some solder around the tip then turn the iron on. would this be the same principle?... great vid btw...
Yes, it's just about covering the tip as it heats up so that would work too.
great video, thanks :)
Sounds like an Aussie. We don't pronounce the "l". We say SAH der. Good point, though. Tin the tip.
Who cares? Solder is solder.