sliding fence for better table saw performances [woodworking]

used parts
bearing shaft : 13mm dia. 1000mm long 2ea.
shaft support : 13mm 4ea.
linear bush : 13mm 4ea.
I'm going to show you how to use and applications in the next video.
This fence is a concept one, not a final one. please don't try to make.

[@patkav]

What for you need such a thing?

[@JohnColgan.]

Nice build. Looking forward to seeing the next video for application and use.

[@j-woodworking9573]

Thanks for watching sir. Be healthy always.

[@aigretbenoit]

Nice work. allways so clean and effortless. One suggestion: try loosening all the bearing block bolts and then tighten them again by hand, skipping around like you would with a tire. Snug, firm, tight. I think she will ride a lot smoother

[@jeanloreaud9282]

Ingénieux bravo., vivement la suite à bientôt salut Jeannot 😉🛠

[@j-woodworking9573]

Thanks for watching sir.

[@paulstanding7267]

Looks great will have to wait until next video to see what/how you use it take care 😀👍

[@j-woodworking9573]

Thanks for watching sir.

[@GNU_Linux_for_good]

09:20 Excellent job. *Minor* correction at the end of the video: "Please stay *tuned* ". Thumbs up.

[@j-woodworking9573]

Thanks for your corrections sir.

[@MrLeram12]

목공일기 = Woodworking diary. Cool stuff you build.

[@rolandgdean]

Amazing J. I really feel like you may invent something that changes the way many wood workers do this hobby and trade. Great video as well...as always.

[@j-woodworking9573]

Thanks for watching friend. Take care.

[@sapelesteve]

Well done J! Looking forward to part 2 of this video..... 👍👍

[@j-woodworking9573]

Thanks for watching sir.

[@HCarpenter]

Excellent job bro

[@j-woodworking9573]

Thanks for watching sir.

[@Marcus_Caius]

Very nice jig, well done!
If you plan to make that jig, add locktite to your material list. Use it on all setscrews and bolts. The last thing you want is a flying piece of hardware :)

[@davidsharpe3540]

If this is a concept when will the final version be made?

[@fredmartinez933]

nice sliding fence..i will build one thank you for share..

[@j-woodworking9573]

Thanks for watching sir.

[@arth.4196]

You have given so many Jig ideas and that they are makeable it's Great 👍 to have such a Wood Craftsman as your UTube Channel. 👍👍👍👍👍

[@j-woodworking9573]

Thanks for your encouraging comments sir.

[@karelpolman3235]

Great invention and extremely well made videos, could you put an Amazon link for products you have used. Very well done Karel Polman New Zealand

[@j-woodworking9573]

Sorry I brought them at a local shop for bearings. Thanks for watching sir.

[@frankyoe1]

And what exactly is the benefit?

[@MrGeroth]

Awesome idea.

[@j-woodworking9573]

Thanks for watching sir.

[@viorsa8200]

Otro magnífico proyecto , muy bien desarrollado y mejor ejecutado , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia ( España) 🤓 😜

[@j-woodworking9573]

Thanks for watching sir.

[@FrancisoDoncona]

As always very entertaining and professional approach but I don’t see the advantage over what you had before? It does the same task but only in a different way.

[@j-woodworking9573]

Sorry about that.
Thanks for watching sir.

[@user-ssrshin]

ㅎㅎ 좋네요
이것으로 사개장부 만드시면 더욱 정밀한 가공이 되겠네요

[@j-woodworking9573]

사용해보지 않아서 아직 모르겠습니다. 다음 영상에서 시도해보겠습니다.
감사합니다.

[@alanmcwilliams4264]

Looking forward to your next one

[@j-woodworking9573]

Thanks for watching sir.

[@Lind_Knight]

Без сомнения прикольно смотреть как работают другие, но снова не до конца понятно применение. Минутной демонстрации деформации какого либо малоценного бруска было бы достаточно. Наверное в следующих видео автор покажет, посмотрю.

[@j-woodworking9573]

Thanks for watching sir.

[@stevenowen9279]

English comments please

[@user-Rvv]

На последних секундах есть надпись: " Я покажу , как это использовать в следующих видео. Следите за обновлениями ".
There is subscription at the last seconds of the video: "I'm showing how to use and application (?? mabe = apply or install ? ) in the next video. Please stay tuned".

[@stevenowen9279]

What does this mean ?

[@stevenowen9279]

Can we have English comments on ytube please

[@arthurcrosby5755]

I like it. Well done and thank you for sharing your excellent workmanship and video. 👍

[@j-woodworking9573]

Thanks for watching sir.

[@crossgrainwoodproductsltd9230]

선생님, 저는 당신의 재능과 당신이 만드는 아이템에 경외감을 느낍니다. 그들은 매우 창의적이고 매우 실용적입니다. 당신의 비디오를 주셔서 감사합니다. 매우 고무적입니다!

[@kemalyorbik8692]

Excellent👍

[@j-woodworking9573]

Thanks for watching sir.

[@Gus0046]

Excelente trabajo. 👍🙂

[@j-woodworking9573]

Thanks for watching sir.

[@monti409]

Do you have a list of parts and where to purchase them, great idea and video, thanks

[@j-woodworking9573]

Two 12mm dia shaft rods
Four linear bearings
Four supports
I bought them at a bearing shop near my home.
Thanks for watching sir.

[@monti409]

Thank you very much for the information.

[@MCsCreations]

Excellent work, man! Really well done! 😃
Stay safe there with your family! 🖖😊

[@j-woodworking9573]

Thanks for watching sir.

[@howardsarro]

What is that measuring tool you used? I'd like to get one but don't know what it's called.

[@j-woodworking9573]

Sorry I don't know the tool name in English.
Thanks for watching sir.

[@코뿔소-z4q]

정교하게 보는사람 이해하기 쉽게 잘 하십니다 .ㅡㅡ

[@j-woodworking9573]

감사합니다.

[@jason4547]

I'm curious what its runout would read from one end to the other, with a dial indicator ?
I think your on to something... Good Job. You've earned yourself a new subscriber !

[@j-woodworking9573]

I checked parallel of two shafts.
Thanks for watching sir.

[@victorhopper6774]

@@j-woodworking9573 i think he meant to the blade. nice work!

[@arthurcrosby5755]

@Chooper @victor hopper As J-Woodworking says, he measured the distance between the parallel rails. If the error in this is low, the distance of each rail from the plywood to which they are fixed should be the same along the length of the rails, within the tolerances of the plywood thickness, the diameter of the rails and the rail mounting fixtures. Since the device is attached to the tablesaw fence, the only additional errors would arise from the standard errors between fence, blade and table, which I expect to be low.

[@jason4547]

@@arthurcrosby5755 I wasn't curious whether or not the guide rods were parallel. I'm interested in how much deflection there is from end to end.

[@arthurcrosby5755]

@@jason4547 I know that you asked about the measured deflection from end to end. My explanation describes how the measured deflection end to end should be no (or little) more than that of the table, fence and blade without the additional sliding fence. If the plywood used for the sliding fence is the same thickness at each end; and the rod mounting pillars are identical within or better than the tolerances of the table and existing fence; and assuming the roundness of the rods is better than these tolerances; because the rods are parallel the error end to end will be within the error end to end of the originally fitted fence from the blade. I believe that measurement of the end to end variation for the fence and blade compared with the sliding fence would bear this out. I hope you get it. Sorry I can't explain it any clearer.

[@서양화가김용옥]

영상 잘 보았습니다. 근데 무슨 용도인줄을 모르겠어요. 실사용 도 올려주면 이해가 쉬웠을텐데요.

[@j-woodworking9573]

다음 영상에서 활용법을 보여드릴 예정입니다.
감사합니다.

[@gary24752]

Do you have links for where you got the parts for this?

[@j-woodworking9573]

I got them at a local shop nearby my home.
Thanks for watching sir.

[@gary24752]

@@j-woodworking9573 Ok then how about a manufacturer then so I can find them.

[@nspctor7729]

2:13 - Try drilling the large hole FIRST, you then have a center point to drill the smaller hole. Takes the guesswork out of finding center.
Otherwise interesting project.

[@cokhichetao72]

Tuyệt vời 👍👍

[@ВиллиамТер-Иванов]

Вспомнился старый анекдот про верблюдов: "Мама, а для чего нам весь этот тюнинг в Новосибирском зоопарке?"

[@j-woodworking9573]

Thanks for watching sir.

[@papahong3600]

영상 잘보았습니다
용도는 이해가 가지만 저렇게하면
가운데 부분은 미세한 휨이 생길것 같습니다

[@j-woodworking9573]

네 그렇 습니다.
실패했습니다.

[@Dias6605]

А на какой хряк он нужен?

[@YAHYA_SUMIGAR]

Mantap

[@j-woodworking9573]

Thanks for watching sir.

[@marcenariahobby7pallet]

Muito top 👊👊👊👊👊🇧🇷👍💯

[@j-woodworking9573]

Thanks for watching sir.

[@davidtaylor62]

I see most of the comments on here say that's a good idea. I'm wondering if you have made some wooden wheels for your car too because that would be as useful as this idea.

[@woodworkingdiytools6898]

To my future husband, I've been waiting for you for nearly 20 years, where are you, I don't want to wait any longer.

[@j-woodworking9573]

Thanks for watching sir.

[@겸손이즈나딩]

조기대는 일본말이예요.
영어의 가이드라는 의미인데,
'행정 용어 순화 편람'에서 제시하는 규준대, 미장나무자는 본래 용도에 그 의미가 부합되지 않는다고 생각됩니다.
'정확하게 가공할 수 있도록 도와주는 가이드'라는 의미를 순우리말로 뭐라 부를까 고민해 봤는데요.
그므개와 '길잡이'를 조합한 '금잡이'가 제가 제시할 수 있는 한계입니다.
그므개는 아마 금(긋는) 물건이라는 의미일 것 같아서 이렇게 생각해 봤습니다.

[@j-woodworking9573]

바람직한 용어를 사용하도록 노력하겠습니다. 감사합니다.

[@sergnemo2379]

молодец. руки есть. вопрос. нах у я .? (ипать я тоже люблю приблуды мастырить..)
ок. fine/ but what reason//how use it//
va bene //ma сhe lavoro
sorry for my esperanto

[@alexandergrigorev4518]

This variant is not rigid enough it’s better to use rails (from CNC constructions)

[@j-woodworking9573]

Before I made it I anticipated that. This fence is concept one. There will be problems. And I keep solving them. Through the process I'll make progress. Sorry sir.

[@АлександрЦивенко-к3к]

Как всегда все четко

[@j-woodworking9573]

Thanks for watching sir.

[@kamchatka5144]

만들었으면 사용 과정과 결과물은 어떤지 보여줘야 하는데
손가락으로 까딱 하다 마네요.
상상하라는 얘긴 가요?

[@j-woodworking9573]

성공하진 못했지만 다음 영상을 보시면 될겁니다. 감사합니다.

[@leeboon8499]

👍👍👍

[@j-woodworking9573]

Thanks for watching sir.

[@fabriziogamba4964]

Bravo

[@오민호-y1f]

재료 구매는 어디서 하셨는지요

[@j-woodworking9573]

Thanks for watching sir.

[@j-woodworking9573]

베어링 가게에서 구매합니다.
감사합니다.

[@Omega_proff]

А зачем это?

[@muoinon6518]

👍

[@gerardoquiroga3013]

???

[@bahurupavirabharda4246]

+++

[@j-woodworking9573]

Thanks for watching sir.

[@boriskolcov8380]

просто херня ! полная !!!

[@gillesmarange991]

👍👍👍

[@j-woodworking9573]

Thanks for watching sir.