Atomic Force Microscopy (AFM) measures surface topography using a physical probe that interacts with the sample, providing data on non-conductive and conductive materials. In contrast, Scanning Tunneling Microscopy (STM) uses quantum tunneling current, requiring conductive samples and offering higher resolution for atomic-scale imaging
BT21CME063_LAVUDYA GOVARDHAN-Could you clarify what are the movable parts in AFM, because in working ,u explained how Controller detects and send signal to Piezoelectric, so that the laser gets to the center of photodiode, but here as you said Cantilever Tip is moving, just clarify that the controller adjusts the piezoelectric tube or the sample or the Cantilever Tip for getting laser in the center.
Piezoelectric tube moves due to feed back....and cantilever move because of attraction between atoms, so when the movement increases than the set point, piezoelectric tube get shifted in such way that it again set to the previous set point
Very good explanation 👏👏🙌
Very Informative ....
Concise and precise explanation.
Very well explained
BT21CME109 Durgesh Sirsat
What is AFM's role in nanotechnology?
What is the role of the piezoelectric scanner in AFM?
What is the role of calibration in AFM?
BT21CME041 Abhilasha Dangore
Can AFM be used in liquid environments?
BT21CME075-Atharv Balki
What is the role of the feedback loop in AFM
BT21CME070 Sumit Bage
what is phase imaging in afm ?
BT21CME022 Shrihari Deshpande
What is lateral resolution in AFM and vertical resolution in AFM
BT 21CME067 _Achal kannake How does an AFM compare to a scanning tunneling microscope (STM)?
Atomic Force Microscopy (AFM) measures surface topography using a physical probe that interacts with the sample, providing data on non-conductive and conductive materials. In contrast, Scanning Tunneling Microscopy (STM) uses quantum tunneling current, requiring conductive samples and offering higher resolution for atomic-scale imaging
BT21CME063_LAVUDYA GOVARDHAN-Could you clarify what are the movable parts in AFM, because in working ,u explained how Controller detects and send signal to Piezoelectric, so that the laser gets to the center of photodiode, but here as you said Cantilever Tip is moving, just clarify that the controller adjusts the piezoelectric tube or the sample or the Cantilever Tip for getting laser in the center.
Piezoelectric tube moves due to feed back....and cantilever move because of attraction between atoms, so when the movement increases than the set point, piezoelectric tube get shifted in such way that it again set to the previous set point
BT21CME084_Radhay Shyam Thakur How are AFM tips sharpened
BT21CME045 Saumya Rewatkar
What is the advantage of AFM over SEM?
BT21CME028_ADITI MISHRA-How is the cantilever deflection detected in AFM?
BT21CME024 - What is the role of damping in tapping mode AFM?