How To Replace Headlight Assembly 1997-2000 Toyota Tacoma
HTML-код
- Опубликовано: 24 авг 2024
- I replaced the headlights on my 1999 Toyota Tacoma that were in bad shape. I had already tried cleaning them with a 3M kit to remove the discoloration and haze with some success but I was not satisfied so I bought new ones for $139. In the video I say there are 5 clips holding the grill when there are actually 7.
Thank you sir. Helped me on my '99 Tacoma. Very simple and quick after watching this video.
Glad I could help. Just make sure you buy OEM headlights. The aftermarket I bought look good but the light output is horrible. No longer own that truck and now own a 2011. Bought OEM headlights for it an they are great.
14 years later and I thank you sir.
Mine is also 1999 with 312,000 miles.
Gerald, You're the first RUclipsr who completed the procedure without breaking one of the plastic clips. I am preparing to replace the headlights on my 18 year old Tacoma and I have to trust that the brittle plastic pieces won't break when I pry them out. Unbelievable.
I was lucky but I did go very easy on them and took my time getting them out. Good luck with yours.
Thank you! The gift that keeps on giving. Just did same on my dad's '99 Tacoma he gifted me (132k original!)
Glad it helped you
Another comment appreciating your work, Mr. Clay. Thank you sir.
Thanks, Gerald. Gonna do this for my '00 Tacoma. I can barely see at night with those original headlights I have in there right now! Can't wait to get the new ones in.
Just bought a 98 Tacoma a few months ago and I've had the marker lights flopping around from the top bolt the whole time. Good to know I'm not missing a bolt, it's just not in the bottom clip. Thanks for the video, sir!
This video saved me hours of frustration. I have a 2001 4runner and the driver side headlight was cracked. I couldn't figure out how to take the assembly out, but this video walked me right through it. THANKS!!!
98 Tacoma still chugging thanks to you
I'm about to install the identical headlights and 6000k HID light kit. Your video is extremely helpful thanks. Wish I would of found sooner, before I broke my grille clips.
Thanks For your Time to show step by step!!
Thankyou Gerald, made it happen.
thanks to this video i installed my new headlights in 30min. THANK YOU!!!
On my truck once I installed them they were almost in perfect alignment. Not perfect but close enough. You may have different results and if they are out of alignment then of course you will have to align them.
Just ordered some new headlights that look identical to your new ones. How do they perform compared to your old ones? I appreciate the video...I think it'll save me a crapload of time tryin to figure all that mess out. God bless ya bud.
This was a tremendous help,thank you so much for posting this
Thanks Travis. So very glad it was of help to you.
Thanks man
@gilgia On the clips like yours you take a small screwdriver and push on the clip on one side and pull slightly, then push on the opposite side and it should then come apart. Like you said these are very easy to break especially on an older truck. I was lucky in that nothing broke for me.
@kyclay58
Yeah are the same way....there's no specific beam. Just kind of a spray of splotchy light. But much better than what I had no doubt. Thanks again.
Thanks this did help me on my 96 Tacoma yesterday thanks for posting this.
thanks Gerald!
I would advise you to visit your local salvage yard to get any replacement parts you need other than the actual light assembly.
Glad this video was of help to you. Congrats on saving big bucks.
Lol should of looked ar this prior to yanking! Good video
Thanks helped a lot🤙
Thank you for the video.
So very glad this was a help to you.
@titaniumsalute04
The new lights look great but I am not 100% satisfied with their performance. There are some shadows in the light pattern.
Gerald Clay not ordered any yet cause I heard there was a “process.” But you’ve helped me figure it can be done👍🏼👍🏼. Think better check n see 1st if grill clips avail since mine’s a ‘97 and live in HI where plastic break down is quick.
@texasjgreen So very glad it was of help.
thanks for replying back.
Thanks that helped out quite a bit! Cheers
So glad it was of help to you.
Glad this helped you.
Great help sir thnx
Glad I could be of help to you
Thanks a lot
i have a 2000 tacoma what if the corner lights on the bottom which you slide in/out to install are cracked open so it does not lock in and it can wobble around? and also on the other side where you screw in the corner light is busted. What is the replacement piece called so the lights can be installed properly.
I would really like to see a complete swap out kit to glass headlamps , I have never liked the lens style or the plastic material its made from.
How well did those new lights work? I did new aftermarket lights for my Tundra and they suck.
I had the very same experience. These aftermarket light have horrible patterns and as you say, suck. I would advise anyone the pay the extra money and get OEM headlights.
@@kyclay58 Thanks for the reply. Yeah, i agree. The lens shape or something is not nearly as good as oem. I have had people say to replace the bulb, but i don't think that the bulb is the problem.
@@kyclay58 oem headlights or just the bulbs
@@chrisc5028 The headlights not the bulbs. OEM headlights are headlights built by the company that built the one's installed by the manufacture. OEM stands for Original Equipment Manufacture.
What website did you get those headlights from, I'm thinking on getting some for my 1998 tacoma too?
Although these headlights look great I cannot recommend them. The light output is spotty at best. What I mean by spotty is that there are shadows within the light output. I purchased these at autoanything
Actually they look great but the light output is spotty with shadows. I would not recommend these headlights.
Thanks !
Glad it helped you
Great video explaining what I needed to hear but...Jesus Christ, Im sick from your video flying all about all over the place...but still, good explanation
@texasjgreen I broke 1 clip tho..