Microsoft Windows Server 2019 - Initial Setup & Configuration
HTML-код
- Опубликовано: 11 сен 2024
- In this ittaster video we look at performing the initial setup & configuration of Windows Server 2019. This video follows the previous video in the series 'Microsoft Windows Server 2019 - Installation'.
This video covers the lab settings used and some important configuration settings including: Time zone & time settings, Windows update, the 'sconfig' utility, configuring a static IP address, assigning a host name and testing network settings.
@it_taster #WindowsServer #activedirectory #ITCareers #Infotech #Certification
If you would like to learn more about IP version 4 addressing mentioned in the video:
IPv4 Addressing - Introduction To IP Addresses (Part 1)
• IPv4 Addressing - Intr...
IPv4 Addressing - Subnet Masks (Part 2)
• IPv4 Addressing - Subn...
IPv4 Addressing - Address Classes & Public & Private Addresses (Part 3)
• IPv4 Addressing - Addr...
IPv4 Addressing - Subnetting (Part 4)
• IPv4 Addressing - Subn...
Say hi on social media!
Twitter: / it_taster
Instagram: / it_taster
Facebook: / ittaster
Everything is important basic or not, I agree 100% . It's very important understand class IP Addresses if we need to run medium either large organization, every single detail it is important if we want to be good administrators.
Feel free to comment and share your thoughts & Windows Server experiences!
hi! I have a question I can´t seem to find the answer to… How do I determine the IP address I need to use on my Windows Server? Thanks in advance.
@@psychodelicloverboy Hi, for a test lab environment to learn Windows Server, you might want to consider something like a class c private address 192.168.0.1-254 with a 24 bit subnet mask (255.255.255.0). This will allow for 254 host addresses, which is plenty for a test lab. But remember to avoid using any addresses that may already be in use (like a router).
@@ittaster So you wouldn’t use the IP address that the server gets when you first boot it up?
@@crazylemon4602 Wondering the same. Was hoping for a reply to this
Hi, if a server receives an IP address automatically, it will typically be from a pool of IP addresses issued by a DHCP server. These types of addresses are temporary (handed out) and can be re-issued to other devices. So it's really important to assign devices like servers an IP address doesn't change (static). This avoids problems with things like services etc. resolve to.
Hope this helps?
Thanks a lot for your work kind sir !! Very helpfull information, said in a very easy way to understand !! We need more guys like you !!
Many thanks for your support! I'm glad you enjoyed the video.
@@ittaster i want to thank you again sir!! I got the job thanks to you ! I just wanted to let you know ! Even if we dont know eachother !! I hope good things happen to you and your family!!
@@eusebio2077 That's great news! I'm really pleased for you, that's is really kind feedback and I'm glad the video helped. I wish you well in the new job👍
thanks - do post more for the other roles and features
Great stuff.. glad I subscribed!
Awesome, thank you!
What some make hard to follow and understand, this guy makes simple.
very helpful for my final exam thankyou SIR
Hello Sir, can i install window server on Oracle virtual box, and then use a vps ip as network configuration then connect via RDP? please help!!
Great explanations thank you sir
great demonstration.
Sir Do I have direct install to PC the windows server 2019 or I need to use VMWARE ? what is good ?
thank you
When you create the WM do you set the connection as Bridged or do you use the WM adapters ?
Hi, in the VM lab environment, it's entirely up to you. You might want to consider NAT or bridging the connection initially to enable Internet connectivity, to activate the evaluation and install updates for better reliability. You if you wish, change the VMs network connection to internal network to isolate your testing lab.
Hope this helps.
Good video. Would be nice if you speak a bit louder or adjust your microphone for volumes, even at full volume in my phone, your voice is a bit low.
Will do, thanks for the feedback! no pun intended :)
@@ittaster thanks for replying 👍. Waiting for your next videos.
How did you get the ip address and you've entered it
Hello! May I have some questions? How do you generate a fix, static IP for the server? Can I just allocate one from within the subnet range I am on and see in the ipconfig table as IPv4 Address with the custom subnet mask? Why do we have to find a new IP by the way, why not just give the one we read in the ipconfig? (When WS 2019 is installed on a physical machine, not virtualized.) Should the DNS server IP be identical with what I see in the ipconfig? If not, how do I generate an IP for the DNS server? I think that my router does not function as a DNS server. Thank you.
Hi, in a production environment an organisation would plan the IP addressing scheme, depending on size. Organisations tend you use the private ranges from class A,B or C addresses. For you test lab you could choose an address that fits around your router's IP address range (typically DHCP). Ideally exclude the server address from DHCP. It's important to make the IP static for a server & services. For Windows server, client PCs need only the server as their DNS, but to access the internet, the server will need to know the gateway and ISP DNS.
Hope this helps
@@ittaster Thank you. You mean that I should use the default DNS server IP given by my ISP and that I can read in the ipconfig under the Win server 2019 ; and the clients then are given the server IP as their DNS? (I intend to use a test PC as lab environment: I install Win server 2019 on the physical PC, run hyperV, and on hyperV I run a virtual server (same 2019 that runs on the physical PC) and two virtual machines with Windows 10. These virtual PCs are to be managed by the virtual server.)
For the Windows Server you might want to consider using you ISP or Google DNS server in DNS forwarders, but for primary server DNS and client DNS resolution, the AD integrated DNS server on your server.
@@ittaster Dear ITtaster. OK. Thank you!
God bless you
Thanks
Sir are you using vmware in that particular video ?
Virtualbox
@@ittaster i used vmware
How do I set up WS2019 to restart and login automatically every night?
Thanks the tutorial, I just installed 2019 essentials for a small business but I can't connect to the internet. Having trouble figuring out what to do.
If all is good with the router config. Check the default gateway is correct, and the DNS server is able to forward to an Internet DNS server.
@@ittaster I'm not going back to the office until next week so I'll let you know. I installed another PC I just built for them running Windows 11 the same day with no issues, so I'm assuming there isn't an issue with the router config, as last time I was in their office I had setup another windows 11 PC on their network. I saw a reddit post with having the same board I put in their server, but they didn't go in to detail on how they fixed it. This is a brand new build so everything should be working just fine. When I plug the ethernet cable I get the light, but still no connection. I tried messing with the drivers, but since they're for windows 10 and 11 they didn't work.
Do I need to have my router configured for static IP addresses for each computer on the network? My router is set for DHCP.
Hi, if your Windows DHCP server is connected to your Internet router, there will be issues having two DHCP server services running (Windows server & router). For a home test lab a possible suggestion might be to temporarily disable the DHCP server on the router while testing / learning on the server.
Is the server acting as the router or do you have a separate device? I cannot ping the router as you show.
Hi, the router is a separate device.
@@ittaster I have a cable modem/router, should I use that IP address or leave the DNS ip address blank?
It depends if you plan to install Active Directory Domain Services for testing, the server will need to be set to itself for DNS. Windows client devices need to look to the server for DNS too. If you are not installing AD DS role on your test server, you could use your router if it's a DNS server.
@@ittaster Thanks much!!
great videos but for me, I'm getting an error
when I try to ping my gateway it says that the destination unreachable
and down there on events, I'm getting some error like
server1 10010 error and so on...what can be the problem??
Hi, I'd possibly begin by checking you can ping other devices (including loopback address 127.0.0.1). if your lab is virtual, it's worth checking the virtual switch setup too. If you haven't already, it's also worth double checking IP address settings for correct network & subnet masks.
Hope this helps
Jon
Hi Jon does are installation and configuration settings different when installing server 2019 in a ordinary desktop and a server workstation
Am having challenge my workstation computer can't access internet
Something to do with DNS up address not found
Hi, the first thing to check is the IP range you assign to your server in your test lab. It will need to be on the same network as your router (if you are planning on accessing the Internet). After installing AD DS the server typically points to itself for DNS (for internal resolution). DNS forwarders are typically used to forward on non local queries to the ISPs DNS.
@@ittaster I've been trying to figure this out myself for the longest with no luck. So, when I individually ping both the Server 2019 and Windows 10 on their virtual systems using "ipconfig" via CMD, am I using those (IP, subnet, gateway, DNS) credentials to setup the network for Active Directory? Because I cannot figure out why the VMs aren't replying to one another. I don't plan on using the internet, just practicing AD Domain Services, Exchange and troubleshooting.
Hopefully get a response. I've been searching everywhere, and I'm at a loss now.
Hi, double check the virtual network settings in your hypervisor, the virtual machines may not be connected to the same virtual network or sandboxed.
Are you going to make more on this series?
Yes, there is plenty of new stuff in the pipeline!
When I set my static IP address it looses internet. Any idea on how to fix this?
Hi, you may need check, and possibly adjust the static IP to one that is part of address range issued by your router. Also check default gateway and DNS are correct for your test lab. Hope this helps.
HAHA He said ROOTER. COCK-A-DOODLE-DOO!!!
What decided what my Static IP Address should be/where do I get this from?
Hi, in the tutorial I used the network 192.168.0.0/24. This allows for 254 host devices (a range fairly typical for home networks) and likely to incorporate a test lab. The server can be any address in that range (192.168.0.1 - 254) but it's important to avoid IP addresses used by Internet routers and other end devices.
the man has a i7 9th gen. but 2 gb of ram, i just started my home lab and my brain is fried
its a virtual machine
Too low sound level