I have an 2005 Troy Bilt Pony N779, 42" cost $1200 back then, had an engine rebuild caused by the seat safety switch, all the plastic holding the grille to the frame is broken, guess I should be happy it's still working.
had my pony since around 06 still running, i'm hoping n praying it keeps going. Mow prices are through the roof. it's been a good mower i haven't been a good owner. But now I'm nicer to it because I don't won't have to buy a new one anytime soon.
Yeah the current prices should make everyone finesse their mower a little more! Hoping it lasts longer for you, do you keep it inside? Thanks for watching!
@@IndRepair yes, my mower doesn't know what rain is. that's probably key to longevity. MTD should be ashamed of themselves for what they're putting out and what they're charging. I don't believe it's bc of supply chain issues, I think it's corporate greed.
Thanks for the video... I have a Troy-Bilt LTX 1842 built in 2003. Intek 18 HP engine. Same color. I noticed a lot newer ones is when you open the hood the side fenders come with it on my LTX 1842 just the hood opens and the fenders stay bolted to the frame and everything. Watching this video I can tell that all the frame and everything and all the metal way cheaper way thinner than my 2003 model. Mine was $1200 at Lowe's, but then again that was 2003. Yeah this one here is really cheaply made sad to say and I do like Troy-Bilt equipment. But I don't think I'd buy this if I had to buy a new one today.
The LTX1842 is a tank for sure! Any mechanic will tell you they hate this hood design! I have seen about 10 of these newer, cheaper frames cracked or broken at the motor base!
ya, troy bilt is doing a GREAT job of lowering the quality of their mowers while simultaneously raising prices. Prices for low end riding mowers have gone up at least $700 in less than a year and they're still rising.
@@IndRepair yep, the low end John Deere S100 lawn tractor was $1699 at Home Depot in November 2021. Now it's $2399 IF you can get it. Home Depot is removing gas powered mowers from their business and increasing the supply of electric mowers. Soon electric mowers will be the only choice unless you want to go back to reel push mowers and scythes
I have an 11 year old yard machine that appears to be identical to this other than the reverse button and slightly different engine. They can last but probably need to be stored inside.
@@yubtypin I replaced the bearings with new. I did remove the inner seals. While I had the spindle taken apart I drilled and taped a hole on the side and screwed in a grease fitting. Another hole was drilled on opposite side to vent.
I think they are still exactly the same thickness as they always were. They made them extremely thin to begin with I do not see difference in the thickness but it is possible
Just bought this mower and found this video in hopes that it would explain better how to operate some of these levers that I didn't quite understand in the paperwork. I last had a Craftsman that lasted for 17 years and according to you I have just purchased a piece of crap. I'm going to take your advice and return it. As a single woman I cannot be dealing with something that's going to be giving me issues so quickly. 🤷 what would you recommend that's not going to break my bank account? My agonized over buying this without proper advice
I would recommend returning this for sure if you can! I would recommend Simplicity mowers if you have a dealer around. These mowers are made much better all around and the issues associated with these other brands are not an issue with the Simplicity line. Glad you found us before getting too far with the mower! Thanks for watching!
I just picked up this mower today with very limited use for $1000.. so I saved a ton. If I have to put a couple hundred into it down the road I'll still come out ahead.
At $1000 for a residential yard this mower would be worth it for sure! Just police the yard before mowing, don't hit the stump or water shut off and it will last for quite a while!
Chains and tires can be found pretty much anywhere online anymore depending on exactly what you are looking for. What are you planning on using it for?
I bought a new $3500 Troy Bilt riding mower. After 25 uses, the motor self-destructed. Turns out Troy Bilt is using Chinese-made engines. Taking it to their nearest "approved" warranty repair facility is 7-hours of driving.
I hear this story 3 times a week, warranties are a joke on any equipment you do not buy from someone that will service it themselves. The wait will be 6-12 weeks and they will probably claim inadequate maintenace like most other claims
The one shown is a Handy Sam 1000lb lift. I am not sure of the model number I bought it new from a guy who got it with his cruiser. They sell what looks to be exactly the same lift made by A Plus Lifts, Handy, Black Widow, Tuxedo, Pro Lift and many more. This says it is rated for 1,000 lb but I have used it for much heavier things and most of them with the same design and large cylinder are rated for 1,500 lb. It is made well. Thanks for watching!
I agree, some point out it is all they can afford and I understand that also but you definitely have to take care of it and be very careful if that's the case
Well, if they're so bad, why do they make em' in the first place. Every review of these mowers are not favorable. I have one and it does just what a MOWER is supposed to do., it cuts grass. So, they may be crap to you , but it 's a life saver for me.
There is a market for lower end anything, and many times it is the only option. I understand people need these mowers sometimes, and they can last a long time if taken well care of. If they are abused they will not hold up well at all
These things are not worth anywhere near that much money. If you can get a nice condition low hour used one for less then $600 then I’d say go for it. But it’s still going to be a POS mower and your going to be working on it all the time. Much better off getting a Scag stander they are around 12-13k but they are built like a brick shithouse and will probably last a lifetime in a typical residential application if you do the basic maintenance. When we’re only talking about less then 5x the price of this pile of shit for a top of the line commercial mower you’d have to be an idiot to buy one of these things for $2600 or even $2000. In my opinion these POS mowers are only worth $900 to $1000 new. $2600 is an absolute ripoff! I know I know our money isn’t worth anything anymore, but then why hasn’t our pay gone up the same percentage as the cost of everything else?
I see people that take care of them get a lot of life from them but I agree, not well made at all. If you can afford a high end mower that is the way to go but many can not, unfortunately. It is crazy that a few years ago it was less than half the price as they are now
@@fixtritephil7712 Honda is toward top of the line quality and price and anything made by MTD normally sits towards the bottom in both...I will say I have always loved their push mowers but too bad that run is over also. Make way for new junk lines to move in next to the others and fill the gap
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
I have an 2005 Troy Bilt Pony N779, 42" cost $1200 back then, had an engine rebuild caused by the seat safety switch, all the plastic holding the grille to the frame is broken, guess I should be happy it's still working.
They will last for a while if you take good care of them just not made well. You got a great deal compared to what they run now!
had my pony since around 06 still running, i'm hoping n praying it keeps going. Mow prices are through the roof. it's been a good mower i haven't been a good owner. But now I'm nicer to it because I don't won't have to buy a new one anytime soon.
Yeah the current prices should make everyone finesse their mower a little more! Hoping it lasts longer for you, do you keep it inside? Thanks for watching!
@@IndRepair yes, my mower doesn't know what rain is. that's probably key to longevity. MTD should be ashamed of themselves for what they're putting out and what they're charging. I don't believe it's bc of supply chain issues, I think it's corporate greed.
Thanks for the video... I have a Troy-Bilt LTX 1842 built in 2003. Intek 18 HP engine. Same color. I noticed a lot newer ones is when you open the hood the side fenders come with it on my LTX 1842 just the hood opens and the fenders stay bolted to the frame and everything.
Watching this video I can tell that all the frame and everything and all the metal way cheaper way thinner than my 2003 model. Mine was $1200 at Lowe's, but then again that was 2003.
Yeah this one here is really cheaply made sad to say and I do like Troy-Bilt equipment. But I don't think I'd buy this if I had to buy a new one today.
The LTX1842 is a tank for sure! Any mechanic will tell you they hate this hood design! I have seen about 10 of these newer, cheaper frames cracked or broken at the motor base!
ya, troy bilt is doing a GREAT job of lowering the quality of their mowers while simultaneously raising prices. Prices for low end riding mowers have gone up at least $700 in less than a year and they're still rising.
This mower before covid was $1,399 new. Almost doubled in a couple years!Thanks for watching!
@@IndRepair yep, the low end John Deere S100 lawn tractor was $1699 at Home Depot in November 2021. Now it's $2399 IF you can get it. Home Depot is removing gas powered mowers from their business and increasing the supply of electric mowers. Soon electric mowers will be the only choice unless you want to go back to reel push mowers and scythes
If it doesn't go back and forward what is it 7speed
@@IndRepairwow really
I have an 11 year old yard machine that appears to be identical to this other than the reverse button and slightly different engine. They can last but probably need to be stored inside.
Yeah maintenance is key for sure! Nothing lasts forever if constantly stored outside! Thanks for watching!
I modified the deck spindles making it possible to add grease.
Definitely a possibility, just wish they would make them to last for the normal consumer from the beginning. Thanks for watching!
Antizee wheel shafts also or you’ll regret it later
If the bearings are sealed I didnt think adding grease would do any good.
@@yubtypin I replaced the bearings with new. I did remove the inner seals. While I had the spindle taken apart I drilled and taped a hole on the side and screwed in a grease fitting. Another hole was drilled on opposite side to vent.
I just repaired craftsman from 2009 and have to say that troy bilt deck looks thin as paper sheet. Is this shrinklation?
I think they are still exactly the same thickness as they always were. They made them extremely thin to begin with I do not see difference in the thickness but it is possible
@@IndRepair i saw brand new MTD which is same tractor basicly. Looks like The quality and thickness is exactly same as most mowers last 30 years
For sure
Just bought this mower and found this video in hopes that it would explain better how to operate some of these levers that I didn't quite understand in the paperwork. I last had a Craftsman that lasted for 17 years and according to you I have just purchased a piece of crap. I'm going to take your advice and return it. As a single woman I cannot be dealing with something that's going to be giving me issues so quickly. 🤷 what would you recommend that's not going to break my bank account? My agonized over buying this without proper advice
I would recommend returning this for sure if you can! I would recommend Simplicity mowers if you have a dealer around. These mowers are made much better all around and the issues associated with these other brands are not an issue with the Simplicity line. Glad you found us before getting too far with the mower! Thanks for watching!
Thanks for the heads up. 2k that’s allot of money too throw in a peace of crap if I’m gonna spend allot for a mower it better be well worth it.
I agree!!! Thanks for watching!
@@IndRepair You’re very welcome 🙂
Which one would you say is a better lawn tractor thats gonna last.
I would go with anything Simplicity if you have a local dealer
Thank u sir 🫡/ i believe look at nutter mower for my grandfather place 💪/ take care brother ✌️
Awesome!
I just picked up this mower today with very limited use for $1000.. so I saved a ton. If I have to put a couple hundred into it down the road I'll still come out ahead.
At $1000 for a residential yard this mower would be worth it for sure! Just police the yard before mowing, don't hit the stump or water shut off and it will last for quite a while!
@@IndRepair is this worth buying 2017 model Briggs and Stratton 17.5 hp 7 speed for 500 on my local market??
@@blitzbreppin9847 I would check it out first but any more that runs and mows today should be worth $500. Thanks for watching!
My ",Pony" is a 2023 model with a 15.5 HP Briggs & Stratton motor.
That is great!
Where can I get more aggressive tires for the rear end or tire chains
Chains and tires can be found pretty much anywhere online anymore depending on exactly what you are looking for. What are you planning on using it for?
That's the kind I got but the belts not staying thigh
If the belt is not staying tight it could be a worn out belt, bad cable, bad bearings or idler. Need to check everything out to be sure
Or weak springs
I bought a new $3500 Troy Bilt riding mower. After 25 uses, the motor self-destructed. Turns out Troy Bilt is using Chinese-made engines. Taking it to their nearest "approved" warranty repair facility is 7-hours of driving.
I hear this story 3 times a week, warranties are a joke on any equipment you do not buy from someone that will service it themselves. The wait will be 6-12 weeks and they will probably claim inadequate maintenace like most other claims
What type of lifts are you using
The one shown is a Handy Sam 1000lb lift. I am not sure of the model number I bought it new from a guy who got it with his cruiser. They sell what looks to be exactly the same lift made by A Plus Lifts, Handy, Black Widow, Tuxedo, Pro Lift and many more. This says it is rated for 1,000 lb but I have used it for much heavier things and most of them with the same design and large cylinder are rated for 1,500 lb. It is made well. Thanks for watching!
I got this mower and it brand is yard something but the very same thing
Yeah make them under a million names!
Do you have any answers for me thanks
Need some more information
Agreed. These do not hold up. They were 1200ish dollars back in 2018, and even at that price, they don't hold up. The value isn't good.
I agree, some point out it is all they can afford and I understand that also but you definitely have to take care of it and be very careful if that's the case
Blade engagement
ok
We have idler pulley that may fit your lawn mower. We can provide for free. Do you need?
We appreciate that but not something that is here anymore
I do
I wouldn't they are cheap thin metal and the parts cost to much money I stay with the old dependable mowers like the craftsman LT 1000
MTD makes most of the new craftsman stuff with this same design and parts just a different paint
Have 2015 model quality is way better on it than the new ones
Nice!!
Now that hydrostatic transmissions are available, NEVER buy one that has separate speeds.
I sure wouldn't either but the cost difference is pretty high anymore. Thanks for watching!
I got a great used one for 450$ come get it!!
Haha this time of year you can barely give them away! Spring they go for twice that
Well, if they're so bad, why do they make em' in the first place. Every review of these mowers are not favorable. I have one and it does just what a MOWER is supposed to do., it cuts grass. So, they may be crap to you , but it 's a life saver for me.
There is a market for lower end anything, and many times it is the only option. I understand people need these mowers sometimes, and they can last a long time if taken well care of. If they are abused they will not hold up well at all
Worth about 1200.00 at best
Not buying a k engine
$3,299 this weekend at Home Depot....WOW!!
Not a big fan of those courage single cylinder engines there no where near as durable as the older command singles
Definitely agree!
These things are not worth anywhere near that much money. If you can get a nice condition low hour used one for less then $600 then I’d say go for it. But it’s still going to be a POS mower and your going to be working on it all the time. Much better off getting a Scag stander they are around 12-13k but they are built like a brick shithouse and will probably last a lifetime in a typical residential application if you do the basic maintenance. When we’re only talking about less then 5x the price of this pile of shit for a top of the line commercial mower you’d have to be an idiot to buy one of these things for $2600 or even $2000. In my opinion these POS mowers are only worth $900 to $1000 new. $2600 is an absolute ripoff! I know I know our money isn’t worth anything anymore, but then why hasn’t our pay gone up the same percentage as the cost of everything else?
I see people that take care of them get a lot of life from them but I agree, not well made at all. If you can afford a high end mower that is the way to go but many can not, unfortunately. It is crazy that a few years ago it was less than half the price as they are now
BRIGGS AND STRATTON is a better engine.....
I agree for sure.....
@@IndRepairmy Briggs motor blew up on my pony with constant maintenance. Nope!
That's my. Problem
ok
MTD POS
Name 1 brand that isn't a POS that is made today and is remotely affordable...
@@IndRepair Simplicity
Love Simplicity units (most) but they do ask almost double the price of these lower end units and many are still using the Briggs Intek engines
@@IndRepair Honda power WTG
@@fixtritephil7712 Honda is toward top of the line quality and price and anything made by MTD normally sits towards the bottom in both...I will say I have always loved their push mowers but too bad that run is over also. Make way for new junk lines to move in next to the others and fill the gap
I never have good luck out of troybilts, to my opinion they are junk
Thanks for your input and for watching