I just got one for under 500, should I worry about it blowing up like they say after 2500 rounds? Coming from a m70. It was a downgrade to me but I just didn't have enough money this time around for a new m92
Pretty sick, I'm waiting for my HUXWRX 556K for my AK-102 to avoid further mods because I had to install a DA adjustable gas block and thread 5/8x24 on a blank barrel so I could run my Dead Air Nomad on my AK-104. I definitely won't be doing that again.
@@rns_outdoorsThe joke is that that gun won't be accurate at longer distances with such a short barrel because the bullet doesn't get enough of a spin while it's in the barrel so it tumbles and ends up who knows where. The issue is known with the OG AKS-74U which is chambered in 5.45x39, I guess it's even worse with the 7.62x39 The Soviets made a fucky wucky by sawing off the AK-74 barrel almost in half and my fellow Yugos in their infinite wisdom decided to do the same with the M70 because fuck engineering an SMG
@@KaykayStraps you have to remove the stock thread protector that is spot welded on. I got this adapter from CNC warrior. This can is direct threaded to the adapter
@@HighLogic655 not sure off the top of my head, but I’ll check… came with a WASR I bought that was all bubba’d out, but included a SVD style furniture set that I switched out. The grip that came on this PAP looked/felt cheap
what adapter did you use for the Zpap to be able to mount the silencerco can? I have the Omega36M and the thread pitch on my M70 is left turn to tighten.
This is the 1st m92 pap that came in with no chrome lined barrel. Now, there is another m92 imported by zastava arms, it has the chromed line barrel, bulged trunnion and a 1.5mm receiver.
An assault rifle is a fully automatic battle ready firearm. This is a semi automatic replica which is more of a sporting rifle. To own a real assault rifle you gotta have a level 3 FFL/SOT license and pay a $20,000 dollar tax stamp to the NFA
Yes, break weld and got CNC warrior adapter. Not best to stack tolerances like that, esp with an AK, but the hybrid can allows me to have some wiggle room
@@hochi-mayne509 not sure the business’s/dealers name, I bought this from a gun show years ago. I don’t think it’s anything special though, just a base model PAP
@@rns_outdoors did you have to do any special fitting/barrel work to prevent baffle strikes or did it just work for you? Asking cause I’ve been thinking about trying it but I hear M92s have trouble with baffle strikes
@@itchybraids33 it’s the silencerCo hybrid 46 cal, so there is some wiggle room. I haven’t tried it with any 30 cal cans because of that reason. You can check to see if barrel/threads are concentric with a rod, but that 46 cal can gave me plenty of room
Lol but in all seriousness, yes, they are legal but you have to do the paperwork, pay a $200 tax stamp, and wait for approval which takes anywhere from 3 months to over a year
This is what you want if the zombie apocalypse ever happens
🤙🏼
@@rns_outdoors what's the name of the wood color on the handguard been looking for one that color
@@GgDd-v6u not sure, this was just standard wood to my knowledge
@@GgDd-v6u just look up zpap wood furniture
Totally jealous. I messed up getting the Draco.
ruclips.net/video/lt-SgH1ug8o/видео.html
The mini Draco’s not bad, what’s the reason?
AKU-74S
@@christiananaya9207 are you serious?
@@Jordan23501 yes I asked, and what’s better the Zpap or the sam7 44
Jmac makes a hubb Mount to get rid of the stacked adapters !
Everybody loves stacking tolerances, right?!😂
I’ll have to check them out 🤙🏼.
Just got my M70 and it’s AWESOME!
I've owned this for about 6 years I absolutely love it 💯😎💯❤
I just got one for under 500, should I worry about it blowing up like they say after 2500 rounds? Coming from a m70. It was a downgrade to me but I just didn't have enough money this time around for a new m92
Pretty sick, I'm waiting for my HUXWRX 556K for my AK-102 to avoid further mods because I had to install a DA adjustable gas block and thread 5/8x24 on a blank barrel so I could run my Dead Air Nomad on my AK-104. I definitely won't be doing that again.
JMac Customs makes a plethora of muzzle adapters that will thread straight on
Crude and reliable
Whatcha shootin at bud?! I fear for anything in that tree line 😂
This isn’t your typical RUclips mag dump off the side of the road video
@@rns_outdoorsThe joke is that that gun won't be accurate at longer distances with such a short barrel because the bullet doesn't get enough of a spin while it's in the barrel so it tumbles and ends up who knows where. The issue is known with the OG AKS-74U which is chambered in 5.45x39, I guess it's even worse with the 7.62x39
The Soviets made a fucky wucky by sawing off the AK-74 barrel almost in half and my fellow Yugos in their infinite wisdom decided to do the same with the M70 because fuck engineering an SMG
@@justjoe5373 this is just a “novelty” firearm. Cool to bring out at party’s and let your grandma throw some fireballs
@@rns_outdoors Yeah it's pretty much just a cool range toy
@@justjoe5373you think he doesn’t know that
Wooooowww😮
Great video!!!! 🔥🔥🔥
OMG !!!!!!! What's the name and model of that suppressor.👍
@@lindademitro4681 this is the SilencerCo Hybrid 46
That’s nasty!!!! Where did you get that adapter that connects the suppressor to the barrel??
CNC Warrior
Just got one what kind of suppressor u running on that?🔥🔥
@@OCHOCINCO98 SiCo hybrid 46
What kind of suppressor is that? Did you have to modify anything special to make it run with that can?
SilencerCo Hybrid 46
Probably hasn’t even added the kns piston to make it even quieter
You’re probably right
Now THAT is what I'm talking about! Noice! 😎
She’s a beauty
But is that subsonic ammo?
Nope, regular bulk ammo
I prefer the m85 but it's so quite in 7.62
I wouldn’t have minded the m85, but when I got this one 7.62’s were substantially cheaper than 556. Now it seems they are about tit for tat 🥲
Still pretty loud though. The action alone on this one probably isn’t hearing safe lol
@@rns_outdoors Yeah I bought the M70 and 7 6 2. So I figured i'd get the M85 and 5 5 6. Being was the last one my local gun store had.
@rns_outdoors Got a "brace" on it. I want to put a trijcon rmr on it.
@@jamesruppert3152 bought this one new a while ago back when they were under $600… good times
Did it just screw on or did u have to get it modified
@@KaykayStraps you have to remove the stock thread protector that is spot welded on.
I got this adapter from CNC warrior. This can is direct threaded to the adapter
That gun was in goldeneye video game
Looks like it, don’t it 😅
Perfection...
What exact model of suppressor is this
It’s the SilencerCo Hybrid
I think this is the dark walnut? I just purchased a m70 with the same wood and I wanna make it darker. It just doesn’t do it for me.
Not sure to be honest, picked this up a long time ago when they were rather cheap.
It is one of my lightest AK’s however (furniture)
Did you end up needing a KNS piston? I’m thinking of getting a Hybrid 46M when I turn 21 and I don’t want to spend extra on gas pistons for my guns.
Nope, just the adapter from CNC warrior and she was ready to go
DO NOT get a KNS for a pap92 if you want to cycle subs.
@@ghernandez6457 uh, it's adjustable?
What grip is that?
@@HighLogic655 not sure off the top of my head, but I’ll check… came with a WASR I bought that was all bubba’d out, but included a SVD style furniture set that I switched out. The grip that came on this PAP looked/felt cheap
What brand
Nice ❤
what adapter did you use for the Zpap to be able to mount the silencerco can? I have the Omega36M and the thread pitch on my M70 is left turn to tighten.
This one was from CNC Warrior
im totally not jealous 😢
What mount are you using
What do you mean by mount? Adapter?!
I need it !!!
Hearing safe? And what ammo just some steel case?
bulk, steel case. Probably not hearing safe, as the action alone will cause some ringing lol
Very nice!
Q: which ammo were you using in this demonstration?
Just your average Tula
correction *wolf
What is your sling
www.amazon.com/Original-Russian-Standard-unissued-Condition/dp/B09893XF5X/ref=mp_s_a_1_10?crid=10RP9XPDPRMI0&keywords=ak+47+sling&qid=1672328705&sprefix=ak+47+sling%2Caps%2C143&sr=8-10
how did you get a serbian zastava in the USA?
Century arms imports them
This is the 1st m92 pap that came in with no chrome lined barrel. Now, there is another m92 imported by zastava arms, it has the chromed line barrel, bulged trunnion and a 1.5mm receiver.
You using a mix of super and sub?
Nope, all were standard wolf ammo
First shot is always the loudest
@@rns_outdoors Nice, except the 1st shot.
@@hag12100 thanks boss. First shot burns oxygen in can, that’s why they are always the loudest 🤙🏼
My #1 favorite assault rifle love the AK-47❤💯
@@break1722 nope not at all Ak47 my #1
It’s not an “assault rifle”. It’s a SEMI AUTOMATIC pistol
@@jakeh6980Exacally…
An assault rifle is a fully automatic battle ready firearm. This is a semi automatic replica which is more of a sporting rifle. To own a real assault rifle you gotta have a level 3 FFL/SOT license and pay a $20,000 dollar tax stamp to the NFA
Dawg that's not an assault rifle, it's a semi-auto pistol.
Where can I buy online?
Buy what? You can find the gun and suppressor online and have it sent to your nearest FFL/class III dealer
Brace ??
Yes, no, now yes again 😂
Jaki tłumik ?
What adapter ?????????
CNC warrior
What suppressor are you running
SilencerCo Hybrid 46
Did you have to break the weld?
Yes, break weld and got CNC warrior adapter. Not best to stack tolerances like that, esp with an AK, but the hybrid can allows me to have some wiggle room
Hello one question. What is the brand of the suppressor?
@@seruniversal2127 SilencerCo Hybrid
@@rns_outdoors Thank you very much have a nice day.
So your barrel was concentric enough to run the suppressor? Or did you have to do a barrel swap?
Concentric enough for this .46 caliber can. I wouldn’t do it with a .30 cal can, but this hybrid gives it some wiggle room
@@rns_outdoors does it come pre threaded or?
@@marksotelo6472 yes, it is threaded. Just have to knock the spot weld off and remove the thread protector
@@rns_outdoors I have a omega 300 on my Zpap about 500 rounds in no issues I had my local gunsmith check if it was concentric and it is
@@noealvares6149 that’s awesome! I checked mine and all seems fine, but just too nervous to put my Omega on it lol
Still happy with the hybrid46 on it? I’m soon to have the same set up but was thinking of getting a Jmac bravo mount.
Also are you shooting subs?
Yeah, it’s still loud, but waaay quieter with the can.
Hell, the action alone on this will make your ears ring. Shooting supers, standard Tula ammo
That 1st rd was louder?
Then only the action is heard.
Zastava serbian military, nice rifle friend.
First round is always the loudest since it's burning the oxygen in can (or something scientific related to that lol)
Last round bolt stays open?
Not on this one. Selector has a cut out to hold bolt open
@@rns_outdoors pretty neat setup tbh tho, love the wood grip look with the suppressor on
How did you get that handgaurd
It came like that
Its standard for our security forces (army and police)...
Government escort groups use MP5,UMP and M92, depending of missions.
@@rns_outdoors Where did you purchase it? Can’t ever find that option available
@@hochi-mayne509 not sure the business’s/dealers name, I bought this from a gun show years ago. I don’t think it’s anything special though, just a base model PAP
@@hochi-mayne509Zastava Arms USA maybe?
Link the the piece for the charging handle 😅
Are you referring to the little rubber “cap”?
@@rns_outdoors yeah I don’t like the big ass ones ppl have on theirs wanted something smaller on mines
@@KayoMonei that’s just how it was packaged. Just a little rubber/silicon protector for shipping purposes I’m assuming. I just never took it off lol
@@rns_outdoors ok cool mine didn’t 😡😭
What ammo?
Just your average Tula
@@rns_outdoors not bad,,thanks for getting back to me.
@@j.j460 she’s still loud, but waaay quieter. These things are eardrum busters 😅
What thread size did you go with for the adapter, also did you have to do anything special do the barrel to get it to work?
It’s M26x1.5LH. You have to grind/cut the spot weld on the stock thread protector to get it off (just used a dremel).
@@rns_outdoors no your suppressor thread size? Is it 5/8 x 24 or 1/2 x 28 or is your suppressor specially made to fit m92 thread size?
@@itchybraids33 ohh my bad lol. It’s the 5/8-24, typical thread for 30 cal.
@@rns_outdoors did you have to do any special fitting/barrel work to prevent baffle strikes or did it just work for you? Asking cause I’ve been thinking about trying it but I hear M92s have trouble with baffle strikes
@@itchybraids33 it’s the silencerCo hybrid 46 cal, so there is some wiggle room. I haven’t tried it with any 30 cal cans because of that reason. You can check to see if barrel/threads are concentric with a rod, but that 46 cal can gave me plenty of room
💪👌
Isn't it illegal to Own a Silencer? Because here in Germany or Switzerland you get arrested for Owning one. Or do you need a permission for it?
They are legal, cause this is America 🇺🇸
Lol but in all seriousness, yes, they are legal but you have to do the paperwork, pay a $200 tax stamp, and wait for approval which takes anywhere from 3 months to over a year
@@rns_outdoors OK, thanks for your answer:)
@@l_naye.iam73 no problem. With the right paperwork, clean background, and money, you can get about anything in USA
@@rns_outdoors i can second that as long as you got money you can have tanks here actual tanks and ammunition for them
Sneeki Breeki! Haha
снеки бреки?
More like “zestava”
What stock you running on it? I’ve been thinking about adding one to my Zpap
Noticed how he didn’t get the “stock” in frame. Don’t ask about something that doesn’t exist 😉
@@RareTech47😂
Perfek kuat
Che chevo blyat? Zatvornaya zaderzhka?
@@matthewkolomiets4911 que??!!??
太棒了！👍
Imagine having “shooting Draco across your field at trees one handed with a can” money …..🥲
@@g-yoshi9275 bought this pap for $600 and this can was obtained during SilencerCo’s BOGO deal 😅