I got the analog meter kit a couple weeks ago and it's great! Really cute little meters with a nice warm glow. Fairly accurate, too They are easy to calibrate if you have a signal generator. Set it to 1000Hz @ 1 volt and connect to the meters. Adjust the pots on the board to give a 0VU reading.
Accidenti se son belli, ma Daniele la pazienza per montarli è una tua virtù. 225 micro led?!? A me son cascati tutti in terra prim'ancora di ordinarli!!!! Scusa, toglimi una curiosità ma al video 2 hai avuto problemi di candeggio o eravate in due? No perché vedo una manica bianca a destra ed una nera a sinistra..... 😅😅😅 Sei bravo davvero, io vengo dall'elettronica anni 80 con saldatore ELTO BLITZ rosso con lampadina cilindrica... e cose così microscopiche già le vedo volare dalla mia finestra!!!
Impressive every hour. Just to bring back the old song at the end of the video .. You won't go wrong, because the channel was more recognizable for her that way.
This is all well and good, but a serious spectrum analyzer should have 32 frequencies. And most importantly, the column of the left channel level indicator should be located next to the right channel indicator (so that you can easily compare the levels). Not above, not below, but next to. And so on for each frequency with a red indication of peak values with a delay. Choose the type of indicators in such a way that the indication does not fade after 30 years of daily use (remember the faded indication of VCR displays from the 80s) . Choose the type of indicators so that the indication does not fade after 30 years of daily use (remember the faded display of VCRs from the 80s) Perhaps these are ordinary LEDs that do not work at the limit, but with a margin of brightness (saving their resource). Reliability is important here, not a disco of lights. The device should not introduce noise and distortion into the original signal on the oscilloscope. It will be a professional apparatus.
Per le mie abilità e pazienza, quelli da "montare" non valgono il risultato finale (ovviamente ci infilo anche i gusti personali) ;) Alla fine per un progretto a cui sto lavorando i migliori sono proprio i "7" che per fortuna sono preassemblati :)
DON'T EVERY buy from Banggood if you want your money to be held hostage with NO available stock to be shipped out. WORSE CUSTOMER SERVICE EVER as NOT respecting and NOT doing the explicit request of the customer with legal and valid grounds from the unresolved issue!!!
![[#2024MAMA] BIGBANG (빅뱅) - 뱅뱅뱅 (BANG BANG BANG) + FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/EQsYfiPR9uM/mqdefault.jpg)
I got the analog meter kit a couple weeks ago and it's great! Really cute little meters with a nice warm glow. Fairly accurate, too They are easy to calibrate if you have a signal generator. Set it to 1000Hz @ 1 volt and connect to the meters. Adjust the pots on the board to give a 0VU reading.
Grazie 1000 Daniele !!! Essendo stato io adolescente negli anni 80 i miei preferiti sono i vu meter a lancette. li acquistero' sicuramente!!
The most beautiful by far, the last ones.
Vedo che ti dai da fare molti progetti e mano ferma bravo complimenti. Come al solito sei forte. Ciao da cosimo
Sei il TOP. Non immagini quanto, ammiro la tua pazienza. Complimenti.
The first and the last one was my favorite. Nice video
Lanalogico ha sempre il suo fascino.
Anche gli altri sono una bella attrattiva.
Great video. Good job!
Grandissimo lavoro. Complimenti dany, super like by Warmachine bodybuilding dal garage Gym
Awesome arts
L'ultimo è il più affascinante
First and last are my favorites! Thanks much for video!
I always prefer two old nice analogue Sifam VU meter.
Amazing work and cool looking brother
Excelente. me gusto mucho
Grande Daniele 👍
Good job my friend, great video😃👊👍
Grazie Daniele
Complimenti. Ottime indicazioni 🔝
bellissimi progetti
You are simple best....
👍👍👍👍👏👏👏Como no se me ocurrió eso para mi lámpara😆😆
Tenho alguns, e vu meter digital ou analógico mais uma boa música é simplesmente relaxante para a mente ✋
what soldering iron do you use? great video, thanks for sharing
Accidenti se son belli, ma Daniele la pazienza per montarli è una tua virtù. 225 micro led?!? A me son cascati tutti in terra prim'ancora di ordinarli!!!! Scusa, toglimi una curiosità ma al video 2 hai avuto problemi di candeggio o eravate in due? No perché vedo una manica bianca a destra ed una nera a sinistra..... 😅😅😅 Sei bravo davvero, io vengo dall'elettronica anni 80 con saldatore ELTO BLITZ rosso con lampadina cilindrica... e cose così microscopiche già le vedo volare dalla mia finestra!!!
La nuova elettronica miniaturizzata su RUclips 😍
Best work ⚒
Excellent Work!!!
It's amezing 👍👍
Super
Osm brother ❤️👍
Спасибо за этот тест!
Brilliant work
Nice led
Impressive every hour. Just to bring back the old song at the end of the video .. You won't go wrong, because the channel was more recognizable for her that way.
I don't understand what you mean, what a girl, what hackers. The video of the gentleman whose channel it is was commented.
what type of soldering machine do you use? thanks
Good 👍👍👍
UN GENIO!
Good
Ciao! Stupendi tutti, potresti aggiornare il link del primo che è scaduto? Grazie mille
Hey, great video. Is it have any audio audio input other than the power supply? Or it's just picking the outside sound using some microphone?
Молодца!!!
6:12 Hahahah. Fossimo ancora negli anni '90, lo avrei messo come Vu-meter nel cruscotto della mia UNO.
This is all well and good, but a serious spectrum analyzer should have 32 frequencies. And most importantly, the column of the left channel level indicator should be located next to the right channel indicator (so that you can easily compare the levels). Not above, not below, but next to. And so on for each frequency with a red indication of peak values with a delay. Choose the type of indicators in such a way that the indication does not fade after 30 years of daily use (remember the faded indication of VCR displays from the 80s) . Choose the type of indicators so that the indication does not fade after 30 years of daily use (remember the faded display of VCRs from the 80s) Perhaps these are ordinary LEDs that do not work at the limit, but with a margin of brightness (saving their resource). Reliability is important here, not a disco of lights. The device should not introduce noise and distortion into the original signal on the oscilloscope. It will be a professional apparatus.
Già mi vedo nel fare tutte queste saldature..🤔🚨
can u say me, what soldering iron you are use, please ? What a horrible work to solder this microscopic small 225 LEDs !! much respect.
Eu faço as minhas próprias também
Ah como eu queria comprar peças assim mas não sei como
👍👍👍
What is the name of the circuit in the 4th row? Bangood is no longer on sale. Where can we buy it?
Where can I get those LEDs?
So far the second one has alot of soldering dam
It is like you went out of your way to show each item in a different currency….
Sar first wala light kahan per milega
A commercial BETWEEN EACH REVIEW? My threshold has been reached.. I'm outa' here!
Te lo dico in privato! 😁
Tienes pulso de cirujano 👍
Analogía
Per le mie abilità e pazienza, quelli da "montare" non valgono il risultato finale (ovviamente ci infilo anche i gusti personali) ;)
Alla fine per un progretto a cui sto lavorando i migliori sono proprio i "7" che per fortuna sono preassemblati :)
Pollice su per l'assemblaggio...
Primo!
Leue
DON'T EVERY buy from Banggood if you want your money to be held hostage with NO available stock to be shipped out.
WORSE CUSTOMER SERVICE EVER as NOT respecting and NOT doing the explicit request of the customer with legal and valid grounds from the unresolved issue!!!
To bad all of them are not meters at all..
1-7 best others trash
That is some crappy music
Super