HOW TO CONNECT CONTROLLER SP108E LED Wifi Magic Controller WS2811 LED STRIP Module
HTML-код
- Опубликовано: 5 окт 2024
- Smart APP Wireless Control IOS 10/Android 4.4 DC5-24V
support :WS2811 WS2812B WS2813 WS2815 SK6812 SK6813 WS2801 ect
【WiFi Remote Control.】Long distance IOS and Android App remote control via WiFi, IOS 10.0 or Android 4.4 or later edition required. Support routing connection mode (AP) and LAN connection mode (STA). Can't support 5Ghz WIFI
【Wide Compatibility】 Support almost all the one-wire or two-wire LED driver ICs, such as WS2811,WS2812B, WS2801, SK6812, SK6812-RGBW, WS2813, LPD6803, LPD8806, APA102, TM1913, UCS1903, SM16703, DMX512.
【Rich Color Modes】 180 kinds of multi-color dynamic modes, 8 kinds of single color modes such as meteor, breathing, wave, catch-up, stack, flash, flow, static. Color, brightness and speed are adjustable.
【Capture image's color you like】The WiFi controller features creative from-image-to-effect function. It can capture the color of image, create distinctive color effect and synchronize light color with atmosphere of your room.
【User-friendly design】 Support setting pixels number and segments number, control up to 2048 pixels in total. Save user setting when power off. DC 5V~24V wide working voltage; reverse connection protection; hot swap protection
I recently purchased this and I’ve discovered it doesn’t work outside of WiFi at all for me. Do you know of a work around for this?
In my controller, in AUTO MODE it switches from effect 1 to 2 and stays stuck in 2. Is the app or the controller not working?
How much power and how many controller do i need for 15m ( separated thru extension ).. the led will be ws2812b . 60 per m. And the controller would be sp108e wifi.
each led uses 20mA
1pc controller Support setting pixel number able to control up to 2048pixels;
Is it possible to choose different colors for sections of the led strip and apply different effects to them?
No, once you connect them together onto 1 controller, you can not change the effects to each section. You could separate the colors but would have to remain solid colors.
does this led strip(WS2811) have rainbow effects?
and can put two 5m strips together to get 10m?
thanks in advance
Support setting pixel number and segments number, able to control up to 2048pixels;
What is the purpose of the other red and white wire on the led strip. You connect 3, and you have the white and red left over. I’m running the same setup.
The extra red and white wires are to add power injection from a separate power supply unit. Or you can have 1 larger power supply unit and add power injection to multiple strips
Name of the app
What specific specs of power adapter I'm going to use if I connect 20meters on single line of ws2812b with only one sp108e?
Is this possible?
Thank you in advance 🙏
5v power supply with around 40-60 amps (300watts) for that long of a strip line
Can 2pieces of Sp108e wifi controller will control at the same time?
I'm planning to make led matrix on the left side and right side of the stage that's why I'm going to have two separate sp108E wifi controller.
I'm putting printed tarpaulin at the center of the stage that's why the led matrix is located on the left side and right side of the stage because the center of the stage is occupied by the printed tarpaulin 😍
Can this be possible?
Thank you in advance 💗
1x SP108e will control leds strips up to 2048 led total. The number of led strip will vary depending on their cut length and leds density. Cheaper strips have 30 leds per feet, 60 is common on the better one and can go upward of 144 led per feet on the most expensive ones.
@@AlphaGamingCa thank you Sir ❤️
I connected but after a while it was disconnected and now it doesn't connect with the remote control
my plug keeps burning out what should i do?
Can i connect 3 x WS2812 (2m each and 144 leds/m) to SP108E connector ? I want to sync all together
Yes you can.
hi i like technic.very good .can you give the details about power supply?what is votage and amp?exsemple--( 12v.8A/5A/1A)?what did you use?
Hello, I am not using amplifier.
I am using a 12V 400W power adapter.
This is useless unless you say why you are doing what you are doing.
I get an error message when I try and setup.
Is that work with google home/ Alexa?
No :(
why does not it work ws2812b????
work with ws2812b
@@wixuregy7612 it doesnt work with ws2812b im using a 16.4ft strip and it doesnt work
Works with google home?
sp108e not work with google
but this work with google home
www.aliexpress.com/item/4001224798406.html
Da pra usar até quantas fitas de led ?
Through the sp901e amplifier, unlimited access
if just 1pc sp108e is 2048 pixels
Just didn't help me with anything!
Working with 6803?
yes,supply lpd6803
Is the app also in English?
yes,also in english
怎么1全是转的 没好玩的模式么
Can someone please do a video in English showing how to connect?
Sk6813 5v or 12v are supported?
all support
if 12v sk6813 you need 4pin connector
@@wixuregy7612 how to connect
@@oudomsambatchorn851 you need a connect 3pin to 4pin
Ladkiyon jaise haath nails😂😂😂😂😂😂