BTF-LIGHTING Tutorial: SP105E Bluetooth Magic Controller Installation Video
HTML-код
- Опубликовано: 8 сен 2024
- This video will show you how to connect the led strip and this controller . Lots of details.If you want to buy our product, you can just search our brand"BTF-LIGHTING" on Amazon and click the brand name into our shop to find the products you want.
I can’t wait to get mine! So excited !
How do you reset this controller? My controller is suddenly unsearchable via bluetooth. I'm stuck at one setting
Thank u ..waiting on mine to come in next Tues can't wait 💜💜🙏March 2022
To anyone having trouble connecting to the controller via Bluetooth, try and activating your Location Services and then try again, that solved my problem :)
Didn't solve mine.
@@sparky1570784 Is your controller connected properly? When it is connected to the LED strip, do any of the leds light up?
@@ariel1k2 all of them are lit up even when the app is switched to off they are still on. They stay a dim static light blue and won't change color or mode or even turn off.
@@sparky1570784 First make sure the power supply is correctly connected since even the slightest disconnection will terminate your bluetooth session.
Other than that go to the settings and configure the right led strip type, mine was ws2812b so I chose we2811, also choose the correct RGB sequence.
Those two should fix it, if not honestly O don't got any more ideas :(
@@ariel1k2 yea I'm at the same point of out if ideas as well. I have selected the type and led arrangement and even selected the amount of LEDs (pixels). I have the power and ground soldered directly and even tried a separate plug in power supply. Nothing. Still just stays on in that dim light blue. Almost thinking there's a short inside the control box some where because I noticed in the video when you plugged in the leds to the controller it didn't turn on right away until you started messing with the settings. Mine turns on and stays on the moment I plug it in regardless if my app is connected or not.
Hi there, thank you for the informative video. Wanted to ask is there a way to have Auto light on and off like set a duration how you want LED on? as i want to use as a night light for my elderly parents for stairs in the night? also the other end of the LED where it has the wire are you able to remove it to shorten it please advise.
Sure you can . I think you can use this controller : www.amazon.com/dp/B096VP2SMZ?ref=myi_title_dp and this kind of singal white light LED strip : www.amazon.com/dp/B091KM35TY?ref=myi_title_dp timer function .
If you need ,chasing color LED strip , you can use SP601E controller :www.amazon.com/dp/B088LZC1MJ?ref=myi_title_dp This chasing color led strip : www.amazon.com/dp/B088BB8WTZ?ref=myi_title_dp
anyother product question , please contact us support@btf-lighting.com
I got the ws2812B for this controller and the colors are flipped (I chose the RGB WS2811 in the settings menu). Is there any fix? I tried other settings but it does not match up.
Can you contact us support@btf-lighting.com , what power supply do you use ? Power supply output voltage ,output current
I wish people talked on this video
With the controller and the app, I don’t know what lights I’m driving ,Brand? The app ask to pick some model numbers and letters but I don’t know what I have, the led lights where already on the house, any tips thanks
Could you please send us your order ID ? our email address is support@btf-lighting.com
Can I just connect more of the light strips continuously with the plastic female and male connector sockets ?
You mean connect many LED strip light in series? Yes , it can . But you have to power injection every 5meters or 10meter because of voltage drop
after a couple minutes it smelled burnt and when i unplugged the power supply the end of the plug had burnt plastic. i bought the exact same power supply. It may have been because of how the plug was angled, should i try replugging it even with the end of the power supply plug burnt or is that a really bad idea
You need to investigate where the short circuit is. It's possible that the positive and negative poles of the light strip are touching each other ,like the LED strip red wire and white wire touch each other
@@BTFLIGHTING im talking about the power supply plug
Hey, can I add my own color to this strip? Like Purple and Orange for Halloween? All I see are different modes but no way to control LEDs.. Any option? Thanks
I'm Making a Marshmello helmet soon
You can use USB plug controller www.amazon.com/dp/B0B9N8BQQW?ref=myi_title_dp&th=1
I have halo lights on my atv that slip over my headlights to give it a sharp look and when I set them to my desired color and turn the bike off they go back to default green is there a way to make it stay as my desired color, through the app maybe?, thanks
And the music don't help
Can i use the rgb controller on my 2835 rgb strip light?
You can use this controller SP630E : www.amazon.com/gp/product/B0BPCH695M?th=1
My question is will the led's stay on if you exit out of the app?
Yes , it can . I recommend you use this LED strip controller kit . SP630E+RB3 : www.amazon.com/dp/B0C69NSD23?ref=myi_title_dp
How do you know how many pixels to enter? I can't tell with the LED strips I have
For this SP105E ,max control 2048 pixels , you can enter 2048 pixels directly .
Make a video to show this working in a car
I have the sp107e controller that uses led chord, my lights are ws2815 5meter and 60 led/meter for a total of 300 led’s. What numbers do I put into the settings where it has segments, pixels etc. ? I tried 1 segment and 300 pixels but it won’t allow those numbers, 2 segments and 150 pixels per segments will work but I’m not sure if it’s right. Any help would be greatly appreciated
When you unfold your light strip and lay it on the floor, adjust these two parameters again, and different parameters will have different effects. You can carefully compare and see
Do you have to have the gateway to use the bluetooth feature? I am looking at getting the C01RF Single Color. Is this already bluetooth enabled?
C01RF controller is for no ic chip Single color LED strip ,it can work with a gateway . This is the gateway can work with C01RF controller www.amazon.com/dp/B0B8ZBM91H?ref=myi_title_dp If you want bluetooth APP controller for no ic chip LED strip ,you also can use this Bluetooth mesh controller LM053 www.amazon.com/dp/B09NQ15B5K?ref=myi_title_dp
What if i have 2 magic controllers connected on 2 different led lines? Will the app work for the both?
2 different LED lines should be the same IC type and Color channel order .
Yes, but what if use 2 separated ws2811 lines and 2 magic controllers in my car. 1 for the trunk and 1 for under the seats.
Hi there i have sp107e and ws2801 12v pixel 50 leds with red, white, green and blue wires. Can you please tell me how to connect with controller ?
Actually when i connected with controller the light was very dim and colour wasn,t changing.
So please tell me how to do it ?
Thanks in advance
Hello ,
You can try to contact us and send us your order ID , We can show you how to connect , our email address is support@btf-lighting.com
if you have multiple controllers for different strips do they communicate and sync together ?
we recommend you use this SP638E SPI RGB controller , www.amazon.com/dp/B0C3QZRVZJ?ref=myi_title_dp One APP can group control all the SP638E SPI RGB controller . You also can use the RB3 RF Remote to control all the SP638E controller .www.amazon.com/dp/B0BYDG1X5M?ref=myi_title_dp&th=1
Kann man damit RGB Bubbles steuern?
Does the app have any argb flowing presets?
Thank you!!!!
hello, i was wondering if you're able to rename the devices on the app. that would be super nice since a friend and i use this app on both of our cars LED setups and don't want to mix them up and select each others LED's lol
You can use this LED strip controller ,you can rename it .
www.amazon.com/dp/B07FVY51PW?ref=myi_title_dp
Mine won't work. I;m trying to set-up 3-pin lights. The Mokungit ws2182b 93-led ring set. If I turn on the app when the controller is connected to power and the leds, the controller does not appear on my phone's bluetooth. If I turn on the app with the power on the controller but LEDs UNplugged, my phone can find the app, it will connect and I can choose LED type and # of pixels. However, as soon as I plug the leds in, the app disconnects and the phone cannot locate or connect to the controller
djsjjd15 I’m having the same issue have you figured out your issue ??
How do I contact you (the manufactures customer support)?
This is our email address support@btf-lighting.com
What do I need it workd with ws2812b? I have a sp105e but no it works with ws2812b .
Hello ,
Can you contact us support@btf-lighting.com ? We need to know about your connection and power supply . You can send us some photos , we help you to check .
Im having a horrible time setting up this strip. I only have 3 lights that turned on and nothing else. What could it be ?
Can you send us your order ID ? And contact us support@btf-lighting.com ?
we need to know what power supply do you use ?DC5V10A ? DC12V10A ? Which LED strip do you use ?WS2812B or WS2811 ? If you can , please also send us a vido .
Send us a video : wetransfer.com/
Mine worked great but I didnt turn them on for a few weeks and now they womt work. When i go into my bluetooth settings it asks for the pin but I dont know it. If I connect through the magic led app it says I'm connected but wont light them
Does this controller stack and all that with the ws2811 leds?
Yes, it can. But you need to make sure your voltage is 12V
Led strips ws2812b with this controller can reproduce the rainbow scroll effect? Can i configure to fade scroll and the speed of the effect?
Hello, SP105E controller have 200 kinds mode,but I can't makesure if it has the rainbow scroll effect. You can adjuast the speed.
Hi how do I know what chip is in my led and what color code to go by
Many LED strips that people always use is WS2811 WS2812B WS2813 WS2815 , you can know what chip it is from the LED strip seller .
I have a problem with my Hex-Halo for my car's Headlight.
On the Magic-Led app, i have selected a Solid Color from the color wheel (NOT FROM the FIVE COLOR on the bottom), it works at first, BUT when you turn off the car engine and ON again, the LED light turns to RED and not the one you selected before.
Hello Magic-LED app has a problem, it will lose the original setting when your power source is cutted off. So that, you need to set again when you connect the power engine.
@@BTFLIGHTING can that be fixed? or any other way to prevent that problem..? I dont like to reset it everytime i turn my car ON..
@@lukemichael2076 Hello, it's the manufacturer designer problem, when the controller loses current, it will lose the setting record. Of course, you can consider changing the SP601E controller, it can keep the last setting.
@@BTFLIGHTING how about the SP108E? Will it NOT lose solid color selection?
@@lukemichael2076 SP108E can keep the last setting.
Установили такое на автомобиль не показали как надо пользоваться им.
Подскажите какое приложение скачать и как быть
Is it possible to connect with arduino uno? And i it is.. can you please make a video about it?
Hello, we don't use Arduino Uno to control, but our Facebook buyer called Cosimo Semeraro, who makes a WS2812B video with Arduino, you can contact him to get more details. The video link: ruclips.net/video/HfEx9Cb0QSc/видео.html
And we will think about your idea.
I want to install this in my pc. Does the controller get hot? Do you know of another way I could power this from my psu? If you have the connected I’ll buy it off you.
Hello, you need to makesure your PC power first. If your pc have enough power to support the led strip it is ok.
Which power supply you use ?
It depends on which LED strip do you use . If you use DC5V LED strip , you should use DC5V power supply . If you use DC12V LED strip , you should use DC12V power supply
To hard to connect in the app. Do you have video on that after down loading
Hello, you can refer this video: ruclips.net/video/C9OvXj-Iuuo/видео.html Hope this video can help you a lot.
Why does my bluetooth controller come up as "invalid device" when I select it in the app?
Hello ,
Please send us you order ID , we maybe can solve this . email address : support@btf-lighting.com
@@BTFLIGHTING never mind I figured it out thanks for the reply though
@@aaronlfx9199 That is great . If you don't mind you can click this link and drop a review for this product
@@aaronlfx9199 how do you fixed It? I have the same problem ... it cannot be connected
@@lennart6807 disconnect the negative wire then reconnect it. I'm pretty sure that's what I did but it's been awhile I have different lights now.
Have you had any interference issues I have these in my headlights and I noticed when they were off they would still flicker and now that it’s cold where I live they flicker a lot more could the controller be bad
Do you have some photos ? or you can shot a video for me . I will have a check . my email address is 2126290993@qq.com
Hello , I am still waiting for your reply .
BTF-LIGHTING I just disconnected the controller that’s causing the flickering for now and will replace it
So you send it back to the Amaozn warehouse and ask for a new one . that is ok. If you have anyother product problems , you can ask me anytime .
BTF-LIGHTING ok thanks
Hello! :) if you can help me. I want to buy a led strip but i don't know the difference between ws2812 ws2812b or ws2813 and don't know which one should i buy..
the bluetooth controller can control WS2812B and the WS2813 Led strip. all of then are the same IC
the WS2812B led strip has one date input , when one led can not work or the data wire is broken the rest LEDs can not work ,because the rest leds has no data .
WS2813 led strip has two data input , has a data input and a backup data input . all of them connect to the data output from the controller. when one led is broken or the data wire is broken , the backup data wire still can work ,so the rest leds can still work fine.
BTF-LIGHTING thank you for help. One more question i have: do you know what controller is this one?
ruclips.net/video/-I0xWMmaZts/видео.html
we have the similar one . this is the link .this kind of controller can control WS2812B and WS2811 led strip.
www.amazon.com/dp/B01DC0JKGY?m=A35UAT07QG3EC6&ref_=v_sp_widget_detail_page
the lighting effect is similar
BTF-LIGHTING does it work with ws2813?
Yes, it can . it supports almost all the IC type .
Can this control 20 pixel strip at once?
It depends on the total IC chip quantity . it can control 2048 IC chip .
HELP! I've set it up. first several light come on blueish white. solid not blinking. nothing else....and the light strip is getting HOT!
Hello ,
You can contact me with this email supprot@btf-lighting.com , I will help you to solve it . Also I need the amazon order ID .
Installed on my car still doesn’t connect via Bluetooth
Having the same problem has anyone found anything to fix it
No problem with mine in the car.@@Blizzy360
you have to make a decision = do want to make a music video or do you want to make a tutorial; if you want to make a tutorial, ditch the LAME music and talk / instruct / tutor... imagine if "schools" had teachers who just pressed "play" on a music player then just pointed at stuff as the music played.
Warum hattest du 2048 Pixel eingegeben? Ich habe WS2801 mit 32 LEDs/m, also 160 Leds und gebe 160 Pixel ein. Läuft einwandfrei.
2048 is the maximum pixels the controller can control. You can just enter 2048, then you don't need to calculate the number of the leds. But your operation is also right.
Hello so I connected the sp105e controller and it’s just plain white soo can you help me?
Hello, did you scan the QR code from the controller? You need to download the app and adjust the lightstrip mode from the app.
@@BTFLIGHTING yes I did but it still was like that but I solved it I just needed to change some settings on the app and overall I love the controller
@@BTFLIGHTING oh and what are pixels?
We suggest 1024-1500 pixels, the max pixels is 2000
Yes, you need to change the settings on the app
Why i have only red with my ws2811 + sp105e ?
Can you tell us your order ID ? This is our email address support@btf-lighting.com
Voltage problem i guess
so does it work like the arduino or no?
No ,it can not .
Why does my leds stay a dim static pale blue and I can't change it. App doesn't do shit. What's going on? Wires are connected to power ground and data inputs.
Hello ,
Please contact us support@btf-lighting.com , we can help you to solve the problem . Which LED strip or power supply do you use ?Please also tell us the order ID .
Best regards
BTF-LGIHTING
support@btf-lighting.com
hi any fix for the password issue ready to send this rubbish back dosnt work asks for password soon as i try to connect i cannot recommend this product as i cant even get it to work
Hello, we don't know your light strip, power supply and your wiring methods , we can't offer the suitable advice for you, can you send these messages or make a video for our service email: support@btf-lighting.com
Can i connect 12v 2a ac adapter to the controller?
Yes , you can . And please make sure your led strip is DC12V . You can not connect DC12V2A when you use DC5V LED strip .
@@BTFLIGHTING I was looking for that reply, thanks. I had 12v adapter and 5v strip. I have to buy 5v adapter now :)
@@CreamPieAssHoles We are happy that we can solve your problem.😊
Will this work with the WS2815
Yes
Which setting?
My android would not see the SP105E Bluetooth
I returned it. Disapointef.
Could you please contact us support@btf-lighting.com and send us your order ID ?
Mine isn’t coming up as an option
Hello, we are not clear about your problem detail, you can make a video and email: support@btf-lighting.com, our customer support will help you check our the problems.
How do you control individual pixels for the light strips that allow that?
Use the APP Magic-LED , it is bluetooth controller
Does this turn on when you start your car or everytime you need to connect to Bluetooth and then turn it on in the app?
When you power on , it can control your led strip . But when you want to change the lighting effect , you have to connect it via bluetooth .
How many mode?
180+ kinds of chasing color modes
What is the max number of APA102 Leds for this controller? I have a Led Strip with 300 Leds in front of me, but i think its not a good idea to connect them. 300 APA102 Leds is 18A current for this tiny controller. You can set 2048 Pixels in the settings but this is unrealistic! 2048 APA102 Leds = 123A! This is definitively not a good idea. i can't find a description what the max current is!
Hello , you can use DC5V20A power adapter for the 3000Leds apa102c LED strip , that is ok. It also can control 2048 pixels .Of course it can pass 123A current , but there is another problem , every led strip will voltage drop. For example you end to end connect 4 rolls apa102c led strip ,there are 1200 pixels and you use the DC5V7A for these pixels, you will find that you can not light up all the 1200 pixels ,at the end of the led strip can not light up , so you have to add DC5V at the end of the led strip. So the controller just pass a little part of current , you have to add the rest current at the end of led strip.
thx for the great answer :)
You are welcome.
Hi you i need help. I've bought the same but dont know The password for that
I cant connect
Hello, the SP105E controller don't need the password, you just openrate on the Magic-LED APP
@@BTFLIGHTING so this is rubbish cause i have the same issue noone but the person who posted this can get them to work
where to download the bluetooth software?
Hello， the name of the app is Magic Led, you can download from the QR code on the user manual .
fucken thing won't pair, says to use 1234 or 0000, neither work
But the APP cant find The controller
Hello, firstly you need to connect the everything well. Secondly opend the mobile phone APP, you will find the SP105E cotroller. Could you please send me some videos? Video is help us judge easily! Waiting for your early reply!
Hello, could you give me your order number? Waiting for your early reply!
Hello, i have one important question! Can I control 5050 led strip with this connector (i mean mod like rainbow transition and other cool ones)
you mean RGB5050 led strip ? no , it can't . because the RGB5050 led strip has no intelligent IC so it can not have the rainbow lighting effect . they will have the same color at the same time and Blinking . the lighting effect can not running.
what led strip i can use ( if you could name all of it)
WS2812B WS2811 APA102C SK9822 SK6812RGB SK6812RGBW WS2813 WS2801 aAPA105C etc
, We often use WS2812B WS2811
www.amazon.com/dp/B01CDTEKAG?m=A35UAT07QG3EC6&ref_=v_sp_widget_detail_page
can u show connection to a android device ?
and show the app u are downloading this feels like a scam
Hello, you can scan the QR code from SP105E and download the Magic-LED, after you download the app, find the SP105E(No password), them make a test "RGB" or "GRB" or others(It needs to test by yourself, the match is random, we can't make sure) until testing the true one.
Thanks for your advice, we will try to make a video to show the operation.
AHHH!! thank goodness for MUTE... that gayass music was killing me...'_
Dd you really need to add the music????
I agree with you..... the video was made by our product owner at that time, that's terrible....🤦♂️
Seriously the music has to go. Couldn't watch 20 seconds of it
What is with the music. How about your voice
Dude you act like everybody knows how to do that, you moving to fast! Ughh! 😩
Wtf dude the music is trash will not watch your video... talk explain, no one want to hear music.