my oil-less pump got submerged in water during a heavy rain and sat there a few days before I realized. It now is rusty and makes a quiet buzz when plugged in, but does not pump. If I follow the steps in this video, could that possibly save the pump and make it work again?
Hi there, any electrical motor that has been submerged in water should be checked off by an approved electrical motor rewind business. They'll be able to determine if your motor is salvageable. Better to be safe than sorry when it comes to electrical items.
I have the exact same design except on mine there is only 1 air intake. I could definitely add an another one, just not sure what advantage i will get.
Bang saya mau tanya, misalnya kompresor saya tabungnya sudah penuh. Trs saya stel tekanan kluar anginya di angka 4 bar, pada waktu saya buat ngecat pas di angka 4 bar kan kompresor saya hidup lagi,tp kenapa ya di saat saya buat ngecat tekanan angin saya tidak berada tepat di angka 4 bar malah turun dr 4 bar kalo pas spraygun saya pencet terus,tp di saat spraygun gak saya pencet anginya baru mau naik lg bang, kompresor saya yang oilles bang. Kira" apanya ya bang??
Hello there Risal, Your air compressor main pressure should be set at around 100PSI. You then set a regulated pressure that you wish to spray at. This then will give you a continued air flow and pressure flow without pressure drop. The only time you would lose pressure is if you exceed the air requirements.
Hi there, Unfortunately we are an wholesaler and do not give pricing out. You can go to your local industrial tool store and get a price through them. Other than that we are more than happy in sizing up or assisting in any technical questions that you may have.
Hello, Can an engine of this type run for several hours (for sandblasting, for example) ? Or do we have to respect downtimes ? thank you for your reply
Hello there, on some oil less builds you could, but as you already understand the duty cycle is a critical point. The longer the pump cycles for the harder it is working. Heat is the motors worst enemy, the hotter it gets the higher the chance of hitting the motor overload. Always check the air consumption of your sandblaster then pair your air compressor to the air demands is much preferred.
Hi there Arshad, you can do this but the footprint maybe different so you'll have to do some adjusting along with pipe diameter increases and fittings. It's a lot of work to be honest, so you might just want to sell your old one and upgrade completely.
Hi very good and skilled work by the way I have same compressor a white smoke comes from the compressor I don’t know the reason and how to fix it . Thanks
Thank you for your comment. All air compressors depending on usage requires servicing, some more than others based on hours of use or environmental conditions. They are a mechanical item and just like your car which also requires servicing otherwise you can and will get problems. We recommend that all users should do their research prior to selecting an air compressor or discuss with a Peerless representative to assist in the right model.
It's brilliant that peerless have made servicing parts available to their customers. It shows that they want their machines to last and for their customers to get better value in the long run from a longer lasting machine that will run more efficiently. My hat is off to peerless for this! Most other sellers prefer you to throw away the 'dead' machine and buy a new one.
Helpful, Thank You so much
Ring kha milagi
my oil-less pump got submerged in water during a heavy rain and sat there a few days before I realized. It now is rusty and makes a quiet buzz when plugged in, but does not pump. If I follow the steps in this video, could that possibly save the pump and make it work again?
Hi there, any electrical motor that has been submerged in water should be checked off by an approved electrical motor rewind business. They'll be able to determine if your motor is salvageable. Better to be safe than sorry when it comes to electrical items.
I have the exact same design except on mine there is only 1 air intake. I could definitely add an another one, just not sure what advantage i will get.
Hi Attila, it depends on your pumps configuration.
Was really helpful...very well explained.. thankyou so much ❤️
Glad it was helpful! Thank you for your comment!
Sunil
@@peerlessproductsau l
Hello i have this problem the inlet blow air instead suction air i check my hose connection to the tank it was okay hope some one answer my question
If your compressor head is blowing air instead of sucking, you may have a intake valve issue within the head. You'll need to examine internally.
What's is the best grease to add around the rubber ring of the piston.. Or they do not need any of it? Thank you
Hi there Andri, The rings are Teflon and do not require any grease. No oil or grease should be used on oil less air compressors.
इस कम्परेसर के स्पेयर पार्ट्स कहां उपलब्ध हो सकते हैं
You can contact us directly for parts if you are not based in Australia. sales@peerlessproducts.com.au.
Bang saya mau tanya, misalnya kompresor saya tabungnya sudah penuh. Trs saya stel tekanan kluar anginya di angka 4 bar, pada waktu saya buat ngecat pas di angka 4 bar kan kompresor saya hidup lagi,tp kenapa ya di saat saya buat ngecat tekanan angin saya tidak berada tepat di angka 4 bar malah turun dr 4 bar kalo pas spraygun saya pencet terus,tp di saat spraygun gak saya pencet anginya baru mau naik lg bang, kompresor saya yang oilles bang.
Kira" apanya ya bang??
Hello there Risal, Your air compressor main pressure should be set at around 100PSI. You then set a regulated pressure that you wish to spray at. This then will give you a continued air flow and pressure flow without pressure drop. The only time you would lose pressure is if you exceed the air requirements.
what size ring and cylinder go in the 0.78kw oilless compressor motor?
Hi there Chris, this depends on what brand oil less you have. They all vary.
Thank you sir..
Most welcome
What is price 550watt moter only?
Hi there, Unfortunately we are an wholesaler and do not give pricing out. You can go to your local industrial tool store and get a price through them. Other than that we are more than happy in sizing up or assisting in any technical questions that you may have.
@@peerlessproductsau ok thanks
Hello,
Can an engine of this type run for several hours (for sandblasting, for example) ?
Or do we have to respect downtimes ?
thank you for your reply
Hello there, on some oil less builds you could, but as you already understand the duty cycle is a critical point. The longer the pump cycles for the harder it is working. Heat is the motors worst enemy, the hotter it gets the higher the chance of hitting the motor overload. Always check the air consumption of your sandblaster then pair your air compressor to the air demands is much preferred.
Thank you very much for your answer
Sir i have sound less compressor 50lt 1hp can i change the motor 2 hp.
Hi there Arshad, you can do this but the footprint maybe different so you'll have to do some adjusting along with pipe diameter increases and fittings. It's a lot of work to be honest, so you might just want to sell your old one and upgrade completely.
can you convert a oil less compresor into a vacuum??
Hi there Betto Ben, You can buy an vacuum tool, this would be much preferred.
Hi very good and skilled work by the way I have same compressor a white smoke comes from the compressor I don’t know the reason and how to fix it . Thanks
Hi there, With the white smoke coming from it, this may be the piston barrels and rings requiring replacement. Along with the valves.
Where can I buy those rings?
Good morning, You can get a service kit through any Peerless dealer. You can contact us directly on 03 5434 4200.
What is the price of 50lit silent air compressor machine
Pricing varies depending on requirements
What a period off time, how many hours
Hi there Dennis, we work on roughly 2000 hours or annually replacement.
@@peerlessproductsau thanks for your reply, clear answer
Sir how much hp is of this compressor motor..? Any dealer in India..?
Hi there Ravi, unfortunately we do not have any dealers in India at this time. This motor is a 2HP copper wound motor though.
It sound is zero decibel or not
Hi there, All air compressors will create a sound, this particular model is 52dBa.
machine rate
👍👍
Good
Thanks
I recommend not buying an air compressor that has to be “serviced” once a year.
Thank you for your comment. All air compressors depending on usage requires servicing, some more than others based on hours of use or environmental conditions. They are a mechanical item and just like your car which also requires servicing otherwise you can and will get problems. We recommend that all users should do their research prior to selecting an air compressor or discuss with a Peerless representative to assist in the right model.
It's brilliant that peerless have made servicing parts available to their customers. It shows that they want their machines to last and for their customers to get better value in the long run from a longer lasting machine that will run more efficiently. My hat is off to peerless for this! Most other sellers prefer you to throw away the 'dead' machine and buy a new one.