that was one of the best videos I watched in this subject. I have some questions; wattage of curcuit or for a specific resistor should be considered? for 5v supply, 1w 3v led, the wattage for resistor is not 1w?? because the 0.3 apms from led in 3 volts is under 1w. another question is can we run a 6v led on 5v usb supply? is it be on max brightness or even lighted up? if we want a 1w resistor 56 ohms, can we use 4 1/4 14 ohms resistors in series?
Four Kings Lovely video content! Excuse me for butting in, I would love your thoughts. Have you thought about - Runayslarn Survival Manifestation (do a google search)? It is a good exclusive guide for discovering how to repair your electronic items without the hard work. Ive heard some incredible things about it and my work buddy finally got excellent success with it.
Lovely Video! Excuse me for chiming in, I would appreciate your thoughts. Have you heard about - Runayslarn Survival Manifestation (search on google)? It is a smashing one of a kind guide for discovering how to repair your electronic items without the normal expense. Ive heard some incredible things about it and my work buddy finally got astronomical results with it.
I have 12.4v battery and i only need 5v for my servo so i get 7.4 then the servo has the 2.5A then i got 2.96kohms resistor so i calculate. watts = 2.5 x 7.4 is equal to 18.5 watts of resistor? Is it correct? How can i get 18.5 watts of resistor, I only know 1/8, 1/4, 1/2.......etc
@@TechStudyCell I want to drop AC voltage from 240 to 100v and load is 3w contactor coil with 240v to check at what voltage the coil starting the motor
Sir it's very nicely explained in detail, I want to use 6 rice bulbs (SMDs) from 12vDC what resistor like ohms and wattage should I use ? Please reply me....
Howdy, Brother! What resistor should I use if I have a yellow 10mm LED Emitting Diode (1.8-2.2V) powered by two AA Batteries (on/off switch in the loop)? Will 47 ohms work? I'm not even sure if I asked the question properly . Thanks for any assistance.
So, why then, when I connected 10K 0.25W resistor to the 12V battery it got hot enough to burn my finger? According to the calculations: 12v/10000 Ohms = 0.006Amps; And then 0.006A*12V = 0.072Watts. While resistor tested was 0.25W - way more then 0.072Watts required. Why is it getting melting hot?
5v power supply, 100 ohm resistor, 3v led gets 0.02a. 5v - 3v = 2v 2v / 100 ohm = 0.02a 2v x 0.02a = 0.04w general rule is that the watts used should be less than half of the rated watt of the resistor! 1/4 watt resistor 0.25w / 2 = 0.125w max can be used. 1/8 watt resistor 0.125w / 2 = 0.0625w max can be used. so you can use 1/4 and even a 1/8 watt resistor since your setup only use 0.0400w. i think... im new at this, if it blows up dont blame me!
I was rebuilding a headlight assembly on a project car to which a resistor was broken. I’m about 98% sure it’s a 5 watt but I only have 10 watt (same ohms) in stock at the store near me. Will that cause a problem?
it would be bad practice to use one resistor for 20 leds, if one or more of the leds die then the math changes... also as a rule the used watts should never be more than half of the rated watts of the resistor! and if you was to have a resistor for every led, you would need one 1/2w resistors or two 1/4w resistors in parallel for each led.
Maine 44 pcs 2 pin rgb led ko parallel me connect kiya hai aur usko7.30 volt adapter se chalana chahata hu to kitne ohm aur kitne watt ka resistance use karu? HELP ME HELP! HELP! HELP!
Solved one of my confusion 😇 thanks
Glad it helped
Very Helpful Video 😀👍
Thanks
very well presented
Glad you liked it
Your all video are very good and easy to understand keep doing bro
Thanks for your feedback...😃
that was one of the best videos I watched in this subject. I have some questions;
wattage of curcuit or for a specific resistor should be considered? for 5v supply, 1w 3v led, the wattage for resistor is not 1w?? because the 0.3 apms from led in 3 volts is under 1w.
another question is can we run a 6v led on 5v usb supply? is it be on max brightness or even lighted up?
if we want a 1w resistor 56 ohms, can we use 4 1/4 14 ohms resistors in series?
Super conceptual.
Very interesting and clear to the point. For next plz do the smd capacitor
Sure. Thanks for the feedback.
Four Kings
Lovely video content! Excuse me for butting in, I would love your thoughts. Have you thought about - Runayslarn Survival Manifestation (do a google search)? It is a good exclusive guide for discovering how to repair your electronic items without the hard work. Ive heard some incredible things about it and my work buddy finally got excellent success with it.
Lovely Video! Excuse me for chiming in, I would appreciate your thoughts. Have you heard about - Runayslarn Survival Manifestation (search on google)? It is a smashing one of a kind guide for discovering how to repair your electronic items without the normal expense. Ive heard some incredible things about it and my work buddy finally got astronomical results with it.
Super helpful. Thanks buddy.
Helpful video. I like it
Thanks..
Awesome video and information . Thank you .
You are welcome
ok teacher i will try this ❤Thanks you
Very helpful video thx mate.
Welcome
I have 12.4v battery and i only need 5v for my servo so i get 7.4 then the servo has the 2.5A then i got 2.96kohms resistor so i calculate. watts = 2.5 x 7.4 is equal to 18.5 watts of resistor? Is it correct? How can i get 18.5 watts of resistor, I only know 1/8, 1/4, 1/2.......etc
Can we use two 1w resistor parallel to make 2w?
Easy explanation ....🍓🍎🍇
Dear like your vedeo
Pls confirm
6watt led ceiling light driver
How much fuse resistance and watt can used pls reply sir
Tks
Very helpful video...thank you 💐❤
Most welcome 😊
well explained, would u make a video on use of capacitor as resistor?
Pro tip: you can watch movies at Flixzone. Me and my gf have been using it for watching a lot of movies these days.
@Cedric Dorian Definitely, have been watching on Flixzone} for since december myself :D
@Cedric Dorian yup, been watching on Flixzone} for months myself =)
@Cedric Dorian Yea, have been watching on Flixzone} for since november myself :)
Very good video
Thanks
@@TechStudyCell I want to drop AC voltage from 240 to 100v and load is 3w contactor coil with 240v to check at what voltage the coil starting the motor
Thank you so much sar🙏🙏🙏🙏🙏
Most welcome
we Indians are always awsm ty sir!!!
Sir it's very nicely explained in detail, I want to use 6 rice bulbs (SMDs) from 12vDC what resistor like ohms and wattage should I use ? Please reply me....
Is there any colour code for wattage of resistance?
No. Either it will be written or the size will increase with wattage rating.
@@TechStudyCell 100k ohms resister max Watt, example front load washing machine 100k ohms resister having how much Watts
Sir is this resistance available in 20 Watt and 1Kohm
Atlast I found this 💛
Now I understand 50% knowledge about resistance
Thanks a lot.
How did you calculate the total current as 0.4Amp??
Howdy, Brother! What resistor should I use if I have a yellow 10mm LED Emitting Diode (1.8-2.2V) powered by two AA Batteries (on/off switch in the loop)? Will 47 ohms work? I'm not even sure if I asked the question properly . Thanks for any assistance.
good video
Can alter low wattage resistor with higher watt resistor
Yes
Thanks for sharing👌
You are welcome
So, why then, when I connected 10K 0.25W resistor to the 12V battery it got hot enough to burn my finger? According to the calculations: 12v/10000 Ohms = 0.006Amps; And then 0.006A*12V = 0.072Watts. While resistor tested was 0.25W - way more then 0.072Watts required. Why is it getting melting hot?
Battery supply current must be more
100 ohm resistor of what watt should be used to convert 5v to 3v?
5v power supply, 100 ohm resistor, 3v led gets 0.02a.
5v - 3v = 2v
2v / 100 ohm = 0.02a
2v x 0.02a = 0.04w
general rule is that the watts used should be less than half of the rated watt of the resistor!
1/4 watt resistor 0.25w / 2 = 0.125w max can be used.
1/8 watt resistor 0.125w / 2 = 0.0625w max can be used.
so you can use 1/4 and even a 1/8 watt resistor since your setup only use 0.0400w.
i think... im new at this, if it blows up dont blame me!
@@ralphbooger4756 it works bro. It's 100% true👍 Thank u
10ohm 2w resistor + 10ohm 1w resistor connected in series ,then what will be the ,total wattage and total resistance
How can I calculate the resistor if the input is 220v using the 3v LED. And also wattage of resistor. Thanks
217 volt x 0,02 A = 4,34 watt
217 volt / 0,02 A = 10.850 ohm
Given the LED diode use 20 mA.
It helped
MERCI pour ces instructions , merci
I was rebuilding a headlight assembly on a project car to which a resistor was broken. I’m about 98% sure it’s a 5 watt but I only have 10 watt (same ohms) in stock at the store near me. Will that cause a problem?
sir. eik video push button aur blynk par banaye plz..8 relay wala..aur wifi code upload karne ke bad mobile se dale.aur wifi reset button option be ho
Sorry, sir, I'm a beginner. I want to ask? Which value is the 0.6w resistor compared to 1/2w?
love you sir ty sir!!
Welcome...
Can I connect these 20 leds to a car battery with the same 3.6w resistor? Please explain
it would be bad practice to use one resistor for 20 leds, if one or more of the leds die then the math changes... also as a rule the used watts should never be more than half of the rated watts of the resistor!
and if you was to have a resistor for every led, you would need one 1/2w resistors or two 1/4w resistors in parallel for each led.
Thanks.
In front load washing machine 100k ohms resister having how much Watts pl tell me
Thank you 🇱🇰
welcome
If we don't find 22ohms 3.6 watt resistor then what we have to do?
Please solve 🙏
Choose resistor with next greater wattage available
Thanks.🇬🇧👍
Welcome
So 3watt resistor is available
How to get ,current I =0.4 amp
How we get 3.6 watts 10k resistor ????
* but I have only 1 watt 10k resistor
Maine 44 pcs 2 pin rgb led ko parallel me connect kiya hai aur usko7.30 volt adapter se chalana chahata hu to kitne ohm aur kitne watt ka resistance use karu? HELP ME HELP! HELP! HELP!
नमस्ते है
I hate it because teacher always dont show how u fit in the resistor as u need 3.6w. But onli have 2w resistor
Sir tel me in hindi 🙏🙏🙏🙏🙏🙏🙏🙏🙏
Love your clean handwriting! But please stop using this distracting sound every time you put one of those pop ups in (please like, rate me...)
Noted!. I have already corrected that in my recent videos.
👍👏
हिंदी में बताएं
Lpc
Very good
Please o please You Tube have a separate section just for hindi speakers that don't have a good command of English speech and patterns.
I subscribe you, i will unsubscribe my others..
Thanks
I can't tell what the hell he is saying half the time.
मुझे जादा अगेजी आती नहि
Nice vedio,and very helpful, could you give me your contact i have some doubts