Complete Guide: How to Replace the OPDA on 2005-2006 Jeep Wrangler TJ
HTML-код
- Опубликовано: 15 май 2021
- Matt shows how to replace the Oil Pump Drive Assembly (OPDA) on a 2005-2006 Jeep Wrangler TJ and gives tips to help you perform the replacement yourself and save money on costly repairs.
🎥 GEAR USED TO MAKE MY VIDEOS 🎥
========================================
AUDIO INTERFACE: amzn.to/42Vnrzh
CAMERA: amzn.to/3JYJoVv
COLD SHOE BRACKET: amzn.to/40Ov9cA
GIMBAL: amzn.to/42PDvlY
MICROPHONE: amzn.to/3GbhpAS
MICROPHONE: amzn.to/3TYyu6F
MICROPHONE EXTENSION BAR: amzn.to/3M9N4Gz
SMARTPHONE U RIG PRO: amzn.to/40QgrSr
SMARTPHONE TRIPOD MOUNT: amzn.to/40yfTRo
WINDSLAYER: amzn.to/3nzx06H
XLR CABLE: amzn.to/40zowuT
⚙️ YAMAHA WAVERUNNER GEAR WE USE ⚙️
========================================
ANCHOR: amzn.to/3K3iwn6
DOCK LINE BUNGEE: amzn.to/3nrtTO4
DOCK LINE NEON YELLOW: amzn.to/3M3dCJp
DOCK LINE WHITE & GOLD: amzn.to/3ZEEL8Y
EMERGENCY PADDLE: amzn.to/3KnFF59
FENDERS: amzn.to/3G7Txy5
GLOVES: amzn.to/3Knl0y0
NEOPRENE GLOVES: amzn.to/3TXcCZs
NEOPRENE SOCKS: amzn.to/3U1jXXP
SAFETY WHISTLE: amzn.to/3nCYdFK
SPARE DRAIN PLUGS: amzn.to/3KmVdGd
SPARE SAFETY LANYARDS: amzn.to/3nxKvDY
WAVEEATER WATER SPOUT ELIMINATOR: amzn.to/3U25ZoQ
YAMALUBE OIL GALLON: amzn.to/3m05m2s
YAMALUBE OIL QUART: amzn.to/3KnJozF
YAMALUBE YAMASHIELD: amzn.to/3nCEoOR
🖼️ GRAPHICS USED IN MY VIDEOS 🖼️
========================================
PIXABAY: pixabay.com (Free Graphics, Music, Sound Effects & More)
🎵 MUSIC USED IN MY VIDEOS 🎵
========================================
ARTLIST: artlist.io/Mark-437568 (Get 2 Extra Months Free)
AUDIIO: ref.audiio.com/xa792b2t (Get 70% Off First Year of Audiio Pro)
💥 SOUND EFFECTS USED IN MY VIDEOS 💥
========================================
FESLIYAN STUDIOS: www.fesliyanstudios.com (Free Sound Effects)
FREESOUND: freesound.org (Free Sound Effects)
SOUNDEFFECTS+: www.soundeffectsplus.com/ (Free Sound Effects)
DISCLAIMER: When you purchase products through links on my page, I may receive a small commission at no additional cost to you. As an Amazon Associate I earn from qualifying purchases. This helps support the channel and allows me to continue to make videos like this. Thank you for your support!
#truck #jeep #jeepwrangler #repair #tutorial #howto 
Авто/Мото
I finally got around to doing this to mine today. I have had the part for sometime. I was really wanting to take it somewhere and have it done, but after watching your video and a few others, I did this on my own with my son. It took us about an hour, and it all went pretty well. I was so extra nervous and cautious about lining up the pin. We checked and checked, and checked it again. There's a little play in the original device, and we wanted to make sure that the max and min in the play was right in the middle. The other hard thing was trying to figure out for sure which direction to turn the motor to get the pin holes to line up, but we figured it out. Why there did an oil change and it's sounding great and there are not CEL issues, as of yet. Drove it for about an hour after and no issues. Thanks for the great video on this it was very helpful, and surely saved me a few hundred $$ by doing it with myself, and some good tool-time with my son.
Awesome! And you got to spend quality time with your son! I'm glad the video helped. It's sometimes hard to make them because I only know a little about mechanical stuff, and Matt's going 90 miles an hour, and I keep having to ask him what he said, what does that mean because I want the videos to make sense, and sometimes I feel I can't explain things well enough. I'm glad the video helped and that you got to same some money! Thank you for watching!
how do u know when in top dead cemter
Mark, I don't own any of the vehicles you've been working on. You and your family seem so nice and your videos are pretty calming (for lack of a better description) that I find myself enjoying the content. Thanks for sharing and keep up the good work.
Brian, thank you so much! Your comment was so nice and unexpected. Have a wonderful day!
pro tip.. dont use a nail to time the opda when 20 people are watching you replace it at an offroad event... youll feel rushed forget to take the nail out, start the engine and spin the opda around into the block ripping the wires off.. the nail will shear off though
Haha. Yeah, that sounds a little nerve-wracking!
Moron here 😁...I wish I could have seen you crank the engine as the initial step to align the old odpa. Im not sure what to crank/turn over the engine (where thats located).
Hi! I'm checking with Matt to get the exact answer, but he has been working non-stop crazy hours, so I haven't gotten a chance to pin him down and get the answer, but as soon as I do, I'll reply here and let you know. I'm hoping for an answer by the end of today.
Researching myself and saw another video that shows how to turn over the motor. ruclips.net/video/McrtZ6ptSWY/видео.html
@@bradascar1119 thanks! You the man
@@bradascar1119 I'm glad you found that video and sorry for not replying sooner. Matt got really sick and basically slept all day and then he passed it onto me, and I was sick for 2 weeks. Normally I would try to reply much quicker. Glad you got the answer you needed.
@@MarkDHall no worries at all. Just folks all trying to help each other out. Thx for the video it helped.
Get to the point, who cares what he is selling
Thank you for the suggestion, but I like to let my personality show through and build a camaraderie with viewers. If short videos without much context are what you prefer, mine probably aren't the best choice. Thanks for watching, and have a great day.