Tuning my 350Z | DE faster than my HR?!?!
HTML-код
- Опубликовано: 9 ноя 2019
- With the help from Ethan at Trackstar Motorworks we got my car tuned and on the dyno to see what numbers we could get out of it. Watch what happens when you have a vacuum leak on an HR 350z..
Авто/Мото
![Eminem - Tobey (feat. Big Sean & Babytron) [Official Audio]](http://i.ytimg.com/vi/9xn0OHEZZ8Q/mqdefault.jpg)
Subd!
Just taking a sec to say that even though you seem to have just started this RUclips thing you really have a knack for it, your vlogging style and the way you speak to the the camera feels very natural and engaging, keep it up and it'll go places.
I just happened to stumble upon your channel because of the Ebay control arm vid you posted on the 350Z page.
Adnan Pilav I appreciate the support! Thanks for the kind words!
New subscriber!! Love your videos 🤙🏼
Sick video!!
Love my DE. It only has 36k miles on it and I don't really do much with it other than drive it/mod it some. No tracking or Auto X yet.
Supporting your channel, great video, keep creating!!!👍
Thank you!
Dope car! Have a Tommy Kaira Body for 350Z with rebuilt engine, Titanium exhaust(Tomei) system from headers to cat. Tomei cams too. 400Hp to the wheels. Unfortunately a DE with a 6 th cylinder issue & block wear :,(
I like that custom bleeder whole you have on your radiator reservoir lol
Yeah at once point my car was spewing coolant out of it. No worries though, I fixed it with some gorilla tape.
I love you Z
The funky idle is from the thing you pulled out the intake. You just created a vacuum leak leaving it open. Which is why it’s idle surging. Same thing happened to my car and I installed a eps pcv delete and it fixed it.
we fixed it later in the video!
You should consider changing the gear ratios as a mod for your Z if you haven't already
It's because the car still getting air from the other side, you has to close the pcv pipe from both sides.
Just noticed my hobby shop space I rent is literally around the corner from your tuner.
DE FTW!
And get that limp mode tune!!
Clicked on this video, didn’t expect to have a tornado warning/storm intro
I see you with the Akatsuki cloud on the side of your Z
Damn girl you got stile 😂😉
If you swapped those intakes out and got a retune I bet you could see another 5-10 whp. Short rams make less power than stock air boxes.
That is in the works!
Those DE's are stout engines, mine has 210k and has no sludge whatsoever. It's very reliable, I want to make it last another 200k. I just need to start replacing the suspension parts though. Thinking about getting some test pipes and a 22 inch glasspack. That aught to shave a good 50lbs and hopefully it won't sound like shit. I definitely want to do the the glasspack in place of the stock resonator. Just worried that the test pipes will create to much rasp. It's very tempting though because I can get 90 per cat. Plus I don't need the cats where I live there's no emissions. I have a CAI and 5/16th plenum spacer. I'm content with those mods. It's never going to be over 280hp, but it'll be fun nevertheless.
For test pipes go Motordyne art pipes there worth every penny best sounding test pipes in my opinion.
Two years later. I’m curious, still running or did you sold it?
How much did it use to make and what you got on it
You must live real close to me. I’m in Keller. Used to have a DE. Now I’m in a 2016 NISMO Tech 370Z.
I’m in keller too, got a blue 04
Yes! Trackstar Motorworks is in Haltom City!
I noticed that was Midway in Haltom city. I lease a hobby shop off Weaver street.
if you're in tx you should get tuned by moncef from admin tuning in houston. luckily you lost a front lip, i ended up losing my whole Z on my bday recently. so i upgraded to a 370 lol. i subbed bc you're a pretty girl into cars, you deserve more views & subs
thanks!
Hey Nice channel and vlogs on the drift lifestyle, keep it going! :) What’s the size and offset of your wheels? The fitment is sick!
Todd Johnson the wheels in the video are 18x9.5 +12 and 18x11 +10
@@VanessaStiles33 am I the only one that notice that Evan Shanks go here too
What type of rims do you have!!? Sick video and Z with the akatsuki logo by the way, keep up the good work
Andrew Calix they look like enkei rpf1 or a replica maybe
MST Susuka 18x9.5 and 18x11
Ben Z33 thank you ! I just saw this reply!
Vanessa Stiles thank you so much! The figment is sick! Currently doing a manual swap on my Z33 then going to look into some new wheels.
To be honest I'm Dyno certified mmi UTI most people that have Dyno machines don't simulate ram air at all
What mods have you done to gain 30hp ? Make a video
302 not bad. Nice to see women into the Z
Am i the 800th subscriber
what are does wheels called
Got a list of mods somewhere? Clean WHP!
Kind of! I have a video from when I first purchased the car. ruclips.net/video/fntELIJaNXQ/видео.html
It has hr intake manifold ???
What rim size are u running
A dyno is just a tool for measuring change, “delta”, so try not to look at the end number, as much as the difference from beginning of mods/tune, to the final result. BTW, you’ll never see that car reach it’s potential, with those short ram intakes, sucking in hot engine bey air.
working on getting better intakes!
I have almost the same intakes on my 07 G35. 170F Thermostat for an 08 G37 and remapped fans keep my IATs from even getting as hot as they did with the factory air boxes.
What wheels and what wheel specs are those? They look sick
MST Suzuka 18x9.5 +12 and 18x11 +10
What tuning system did you use? I'm not shure what's all out there ...
I plan to tune my G35 sports sedan 6speed High Rev motor, new to the nissan game.
Enthusiast Builders Evolution hey there! I used the UpRev software!
@@VanessaStiles33 thanks, and is licensed with UpRev? Meaning like so i just but the software and he tunes it? Or do I need the cord too?
I'll go over tomorrow and talk to him, i stay in fort worth
Thats ethans Tuner !?
hows the z doin
How much would that cost do that
Maybe it has a speed limiter
What mods?
damn 30hp difference lol doesnt matter on a track though :\ #drivermod i personally couldnt find an HR that wasnt a peice of shit or overpriced, so i got my de for 10 wih 30k miles on it, 1 owner, pretty much brand new
I overpaid for both the HR cars I purchased and I thrash on them. Obviously would've preferred to spend less money but I was insistent on an HR and they're all kinda pricey.
Is that de?
I don't do guess work not hating nice vid
Question Where's this place at and how much did u pay if u don't mind me asking
Trackstar Motorworks in Haltom City, Texas. Contact Ethan on the Trackstar instagram account and he can give you pricing!
So I'm going to subscribe lol ataku life lol
Wit tht hose not connected, its guna cause a vaccum leak an hesitations !!
300whp must be nice
Its cool but still slow, the thing with the Zs is the driving experience, its amazing, i flored it a few days ago and it felt amazing, it felt like i was going 160 and climbing, but when i checked out my speed i barely was hitting 110+ xD
350z and 370z are fun, charming and quite unique, but sadly they are slow as fuck
@@StoneCoolds add a g37 manual convertible differential. It will be your best mod, thank me later
orangekitties44 what does that diff have particularly better? Is it the final drive or?
Nice runs...That being said, not faster than a HR! Not talking trash but it wouldn't touch my 07 G35 HR Sedan. 326 hp and 282 tq at the ground. Intakes, Headers, 2.5" custom dual exhaust, Stillen underdrive pulley, 08 G37 170F thermostat, Uprev tuned by me. I found nearly 30 hp and 50 ft/lbs in the HR engine from cam phasing adjustments.
326? On a dynojet or
@@BunnyBUNGALO Stingy dynojet...My stock M56S put down 368 hp on it. Ran the M56S on a Mustang dyno and got 374.
@@chrisreynolds6520 do you think the stillen underdrive pulley would have a better impact on throttle response for vq3.5 engine compared to a pedal commander?
@@cedricmiller4370 Never used a pedal commander. My Uprev throttle mapping can be tuned as aggressive as one wants. My car tends to hold lower gears starting off uphill now. Not uncommon to see it shift around 5,000 rpm on an uphill ramp at around 1/3 throttle. Just a little throttle goes a long way. The underdrive pulley was noticeable off the line, especially with the a/c on. I can run the a/c now and it feels the same as without the a/c going before. With the stock pulley you could really feel the compressor drag on the engine.
My car is an HR
Wheel specs ? And brand ?
MST Suzuka 18x9.5 +12 and 18x11+10
What are your mods?
Just full exhaust and the K&N intakes (which I would not recommend over stock air boxes).
Vanessa Stiles unless they are the injen or stillen ones that go outside the engine bay, just put those on my HR and love it
You’ll get gapped by a bone stock HR with over 200k miles. #allmightyhr
Mine is an HR homie
I have gapped a 370Z with bolt ons in a 3.5HR G35 Auto sedan. Ran 12.8 @ 108 on street tires at 214K.
Do a pcv delete
Or PVC not sure but also I would have kept the stock air boxes over the ones you have now, no hate ♡
True Radio we did that after the video. Also, I bought the car with those intakes. that’s why we were confused on what the previous owner did to leave a giant hole in one of them.
@@VanessaStiles33 it's supposed to have a like a thumb you can cap off. You have a really cool channel keep going (: and you should get little filters on the pvc valves them selves and cap off parts of the manifold
@@VanessaStiles33 all tuners always say those intakes are more like hot intakes look if you can trade someone lol
hiiiiiiiiiiiiiiiiiiiii
My thoughts not true number or potential for the car or bike in my field just saying 20years experience talking here
Check out my updated video on this topic !
Sub #500
Thank you!