This is great, was able to update to 0.7.9, thank you! I tried doing it using your earlier video and didn't see RPI-RP2 so I panicked, but this solved my issues!
you're a lifesaver! thanks for creating these videos. I really enjoyed your phantom switches videos as well. I'm in the market for new keycaps and switches so if you continue to make review videos of some of them, keycaps specifically next I'd definitely tune in. It's very very helpful. I love my haute now that you taught me how to config it, fantastic product and purchase for sure.
great video was looking forward to your video not a fan of updating to something this major the 1st week like to wait for the bugs and things to come out and patch easy enough to do I might do 1 of my pads on Sunday live stream following this thanks
You should have a physical boot button you can use to get into bootsel mode. Unplug, hold that button down, plug in your board/controller, then release. You should get the RPI-RP2 drive and you can follow the flatten & reinstall section (nuke, fresh flash).
@@Zevaeros tried that and didnt work...so i made a jump between GND and 12 pins, and booted with that, and it booted on webcojfig, then i loaded my backup mapping...just saying this if someone else has the same problem
I get to the web configurator and it doesn't say which varient I have, just says 0.7.1 any idea which I should go for? I got the Frs Furin with their gp2040
I updated my M16 to version 7.8. Now, I can only play on my PS5 when I plug the Brook Wingman converter directly into my M16. If I use it on my PS5, it doesn't work. I changed the settings to PS5, but it still doesn't work, just when I use Xinput, but then my touchpad doesn't work on my M16 for the PS5. Any advice? I don't want to play with the converter on my M16 because it could easily break
So to sanity check: * Plugging the Wingman FGC into the PS5 and then your M16 into that works, but the touchpad button doesn't work when set to XInput mode * Plugging the Wingman FGC into the USB-A port on the M16 and setting it to PS5 mode doesn't work For the former, I'd try setting the M16 to use PS4 or DInput mode and see if one of those works. For the second case, go into webconfig, and verify it's set to use PS5 mode with Arcade Stick. Also make sure the PS passthrough mode is enabled. If you're worried about the FGC snapping or some such I recommend you get the Magicboots PS4; it's much more compact. Another option is getting a USB extension cable and attaching the FGC to that, I suppose.
Generally that happens if: 1. You're already up to date 2. You're on a platform that GP2040 doesn't know what to look for (or a beta version, etc.) For #1, there's nothing to do. For #2, you'll need to manually go to the releases page and download the correct variant for your controller.
Hello! When I go to the website, it appears that I can update to version 0.7.8, the current version of my controller is 0.7.3, but it does not appear which version it is currently using. In this case, would I have to use the Pico or PicoFightingBoard version to make this update? (My controller isn't from Haute42, i bought from a national company here in Brazil, and is a normal hitbox layout :D)
If your controller doesn't have a "specialized" firmware variant (like Open_Core0 or the Haute42/Cosmox) then you'll likely stick with the generic Pico variant. Go into webconfig and on the home page you should see what version and variant you have.
@@Zevaeros ah so I just found my problem was I hooked it through the magic-s too. I just did it without and it's good to go so far. I'm struggling but I might be good now. Thank you 🙏
@@Zevaeros now my issue is my Xbox won't register it. I have it hooked up through the magic-s ultimate, which is updated. My update page for the board didn't have the "update to latest version" option, but either way, shouldn't it still work?
@@NeCoruption Do you have the Magic-S connected directly to your Xbox then your controller into the port there? I don't believe the Magic-S is supported on the USB-A port on the controller itself. If so, make sure you're in XInput mode on the controller.
@@Zevaeros yea, I do. I just now got the latest update on the pad too, and still not registering with my Xbox. I held the light on the flash until it was green, and I've held the button in the controller for xinput as well.
Hi, I just bought a haute42 S16. and when I check on Web Configurator, It comes with Pico (GP2040-CE_0.7.5_Pico.uf2) v0.7.5. Can I update the firmware directly to GP2040-CE_0.7.8_Haute42COSMOX.uf2? Or should I update to Pico version 0.7.8 instead?
@@aduhglupa Yeah, it's painful but it works; as I mentioned in the video whenever you go from one variant to another (e.g. stock Pico to a manufacturer specific variant) it's best practice to use the flatten and reinstall method.
Hello, I have an issue with my haute42 t16 on ps5 which is after playing for about 20 minutes the hitbox suddenly freezes and I can’t make it work until I plug it in again, any help pls?
ERRATA:
* I goofed at around 3:00 in the video and said you go to 192.168.72.1 when it should be 192.168.7.1.
This is great, was able to update to 0.7.9, thank you! I tried doing it using your earlier video and didn't see RPI-RP2 so I panicked, but this solved my issues!
you're a lifesaver! thanks for creating these videos. I really enjoyed your phantom switches videos as well. I'm in the market for new keycaps and switches so if you continue to make review videos of some of them, keycaps specifically next I'd definitely tune in. It's very very helpful. I love my haute now that you taught me how to config it, fantastic product and purchase for sure.
Thanks for the great guide! the cat time at the end was a nice bonus, appreciate it
It's basically a requirement that one of them shows up to threaten the viewer
holy shit this was so much easier than flashing my smashbox fantstic vid
great video was looking forward to your video
not a fan of updating to something this major the 1st week
like to wait for the bugs and things to come out and patch
easy enough to do
I might do 1 of my pads on Sunday live stream following this
thanks
Yeah, looks like there's going to be a hotfix release though the methodology should be similar.
Gracias, muy buena info.👏
i think i bricked my controller no matter what variant i try to flash it with it dosent work
Let's sanity check some things:
1. What controller make & model?
2. What version are you on now?
3. What approach did you use?
I have my m16 connect to my ps5. Do you what the name of down back and down forward is?
hi, my board suddenly reset all mappings, now i dont have the start button mapped, how do i enter webconfig now?
You should have a physical boot button you can use to get into bootsel mode. Unplug, hold that button down, plug in your board/controller, then release. You should get the RPI-RP2 drive and you can follow the flatten & reinstall section (nuke, fresh flash).
@@Zevaeros tried that and didnt work...so i made a jump between GND and 12 pins, and booted with that, and it booted on webcojfig, then i loaded my backup mapping...just saying this if someone else has the same problem
I get to the web configurator and it doesn't say which varient I have, just says 0.7.1 any idea which I should go for?
I got the Frs Furin with their gp2040
Just use the standard Pico variant; I don't see a specific Furin/FRS one.
@@Zevaerosthank you!
i cant use my DDI right and left after i map them....
To sanity check: When you go back into webconfig, are they still mapped? Just want to make sure those mappings were saved.
@@Zevaeros thanks, my problem is i didnt turn on dual directional input in setting
I updated my M16 to version 7.8. Now, I can only play on my PS5 when I plug the Brook Wingman converter directly into my M16. If I use it on my PS5, it doesn't work. I changed the settings to PS5, but it still doesn't work, just when I use Xinput, but then my touchpad doesn't work on my M16 for the PS5. Any advice? I don't want to play with the converter on my M16 because it could easily break
So to sanity check:
* Plugging the Wingman FGC into the PS5 and then your M16 into that works, but the touchpad button doesn't work when set to XInput mode
* Plugging the Wingman FGC into the USB-A port on the M16 and setting it to PS5 mode doesn't work
For the former, I'd try setting the M16 to use PS4 or DInput mode and see if one of those works.
For the second case, go into webconfig, and verify it's set to use PS5 mode with Arcade Stick. Also make sure the PS passthrough mode is enabled.
If you're worried about the FGC snapping or some such I recommend you get the Magicboots PS4; it's much more compact. Another option is getting a USB extension cable and attaching the FGC to that, I suppose.
@@Zevaeros thank you!! Has the magicboots a low input lag as the fgc?
@@MrErsan1 I personally haven't noticed a big difference. It is much lower profile though.
What if you don't see get latest version?
Generally that happens if:
1. You're already up to date
2. You're on a platform that GP2040 doesn't know what to look for (or a beta version, etc.)
For #1, there's nothing to do. For #2, you'll need to manually go to the releases page and download the correct variant for your controller.
Hello! When I go to the website, it appears that I can update to version 0.7.8, the current version of my controller is 0.7.3, but it does not appear which version it is currently using. In this case, would I have to use the Pico or PicoFightingBoard version to make this update? (My controller isn't from Haute42, i bought from a national company here in Brazil, and is a normal hitbox layout :D)
If your controller doesn't have a "specialized" firmware variant (like Open_Core0 or the Haute42/Cosmox) then you'll likely stick with the generic Pico variant.
Go into webconfig and on the home page you should see what version and variant you have.
I was reading the updates for this version, does it enable ps5 compatibility? I have the pico board
You will still need an adapter and the proper setup.
What is my problem. Again, this 192.168 number is not loading...
Did you put your controller into webconfig mode first?
@@Zevaeros ah so I just found my problem was I hooked it through the magic-s too. I just did it without and it's good to go so far. I'm struggling but I might be good now. Thank you 🙏
@@Zevaeros now my issue is my Xbox won't register it. I have it hooked up through the magic-s ultimate, which is updated. My update page for the board didn't have the "update to latest version" option, but either way, shouldn't it still work?
@@NeCoruption Do you have the Magic-S connected directly to your Xbox then your controller into the port there? I don't believe the Magic-S is supported on the USB-A port on the controller itself.
If so, make sure you're in XInput mode on the controller.
@@Zevaeros yea, I do. I just now got the latest update on the pad too, and still not registering with my Xbox.
I held the light on the flash until it was green, and I've held the button in the controller for xinput as well.
Hi, I just bought a haute42 S16. and when I check on Web Configurator, It comes with Pico (GP2040-CE_0.7.5_Pico.uf2) v0.7.5.
Can I update the firmware directly to GP2040-CE_0.7.8_Haute42COSMOX.uf2? Or should I update to Pico version 0.7.8 instead?
Perform the full flash nuke and manual settings install method (basically part 2 of this video) and use the H42 specific firmware when going to 0.7.8.
@@Zevaeros oh okay.. Thanks
@@aduhglupa Yeah, it's painful but it works; as I mentioned in the video whenever you go from one variant to another (e.g. stock Pico to a manufacturer specific variant) it's best practice to use the flatten and reinstall method.
Hello, I have an issue with my haute42 t16 on ps5 which is after playing for about 20 minutes the hitbox suddenly freezes and I can’t make it work until I plug it in again, any help pls?
Are you using an authentication device like the Magicboots or PXN N5?
@@Zevaerosyeah I use mayflash magicboots
@@Zevaeroscan I update it to 0.7.8?
@@Zevaerosit’s currently in 0.7.7
@@Zevaeros I use the mayflash magicboots