There was an issue with the promo code for the first few hours, but it has been fixed. Enter the code TDBC2018 upon checking out and it will provide an awesome discount to Dirt Bike Channel viewers.
I built one of these years ago when I lived in the city. Only difference is I had a piece that went over the front tire so I could put a heavy duty lock.
Your videos have been getting better and better. I am embarrassed now that I wasn't much of a fan when I found your channel. LOL. Thanks for having a channel for dirt bikes.
All I do is turn over a bike stand and put into the center. Take the center bike and push up against the bike stand, this will offset the bars so all three bikes can be tied down. This system Kyle shows does make it easier for where the tie downs go. Don’t have to worry about putting straps through spokes etc. if I was traveling a lot with three bikes, definitely worth it.
Nice Review! Loving the channel! Getting the family into dirtbiking soon and this has been a valuable resource! FYI, Not sure if you've done it, but even if the tailgate wont latch you can lift the tailgate and loop the support wires around the pins on the side of the bed where the tailgate would latch, gives a little extra peace of mind! Thanks again for the great channel!
Nice system. I might need to spring for it. I recently installed some L track across the front of my aluminum Super Duty for hauling 3 bikes and I am not thrilled with the flex in the front of the bed. Kyles - I’m a fan of the channel and your content and hate to be “that guy” critiquing things - but to share a constructive thought - might want to think twice about riding up a ramp especially without a helmet. I’m sure you’ve seen all the videos where this goes south and I’ve seen it in person over my 40+ year riding career. Just needs to go bad once. Just a thought..
Little tip for your tailgate, take the wire that holds it up and hook it over the post that the tailgate clips onto, it doesn’t close it but holds it up so that you can put a gear bag back there and it won’t fall out
The risk with doing this is most tailgates pull out of the pivot pins at the half open angle. So your tailgate can actually come right off if it bounces around at that angle. Ask me how I know…
Cool idea. I got lots of square tubing and big pipe.... hmmm plasma n stick welder n couple hours.... some paint.... turn buckel things from the old camper.... awesome... lol. Or just buy the darn thing cuz its cool...
Or put eye bolts in the bed under each peg and strap from peg to eye bolt. Use a bike stand to offset middle bike. Use straps from forks to sides to hold bikes forward.
Looks cool, but I’ve always just used a big wood log that’s split in half to offset the middle bike. Works just as well if not better seeing how that thing robs you of at least 6 inches up front
Liberty or death, what we so proudly hail One you provoke her, rattling of her tail Never begins it, never, but once engaged... Never surrenders, showing the fangs of rage Don't tread on me So be it Threaten no more To secure peace is to prepare for war So be it Settle the score Touch me again for the words you'll hear evermore... Don't treag on me Love it or leave it, she with the deadly bite Quick is the blue tongue, forked as the lightning strike Shining with brightness, always on surveillance The eyes, they never close, emblem of vigilance Don't tread on me So be it Threaten no more To secure peace is to prepare for war So be it Settle the score Touch me again for the words you'll hear evermore... Don't tread on me So be it Threaten no more To secure peace is to prepare for war Liberty or death, what we so proudly hail Once you provoke her, rattling of her tail So be it Threaten no more To secure peace is to prepare for war So be it Settle the score Touch me again for the words you'll hear evermore... Don't tread on me
I'm sure he has a "Fan Club". Do your own search, explain your skill level and accomplishments and offer to challenge him -- you can even create two sections: one that he designs and one that you design. May the best rider win. I know on whom I would place my bet.
Excellent review like all of your videos. I wish the promo code still worked. Looks like it must have been a code back in 2018. I’ll scour the used market place for this. $400 before $55 shipping and $40 in tax seems pretty steep. Cheers!
I've gotten 3 bikes in. The middle bike, mine, had the fork saver so the handle bars were up, the other 2 bikes did not, so the forks were compressed more.
That discount code does not work anymore. Has it expired? Does anyone have an active code? Looks like a nice product, but costs close to 4 times as much as some of the bolt on options.
Is there any way to take the tie down around the tire and apply enough pressure to hold tire in the clamp? This way you don't end up putting so much pressure on fork springs and seals. Nice product it looks well made.
Hey Kyle, How far back of an offset do you get with this setup? I’m looking to buy a tunneau cover the Revolver X4S by Back Industries. I can’t find any info of how far of an offset, or how much room you actually have. Which would obviously determine which tunneau cover you could run with this system.
Careful pulling bikes loaded backwards on trailers... had a atv come in the shop for repairs.... engine was full of dust from a 20 mile dirt road run to the camp... tried to start the honda 500 n bent the rod.... plug the exhaust when backwards
rodie4352 I have done this as well but you must admit that having an anchor point that extends past the truck box is pretty awsome. We had a strap come off on a dirt road and one bike damaged the others rad and ruined the ride day for my buddy!!
I was very nervous putting my brand new beach cruiser on this rack. ruclips.net/user/postUgkxG6JIgwJhur8_Rg8UeQ3EmePzi_wSncL8 But after reading many reviews I decided to get this one and take a chance. When arrived it was very simple to adjust and put together. I also added spike tape over the metal hooks before securing and tightening the straps, and no scratches. I also purchased the top bar made by the same company so that my cruiser sits straight on the rack without having to turn upside down. Extra bungee cords are used to secure the front wheel from flapping and even piece of mind knowing your bike is secure. Definitely recommend...
The middle bike would be hanging off the back of my tailgate. Short bed problems I'll just put the middle bike backwards like I have ever time I needed to move three bike
That's a copy of John Nicholas rack he designed and built about 10 years ago. It looks to be changed enough to get around the copy right. I would mount it all the way fwd thought
Great video except please work on the volume difference between your music and your speech. Couldn’t hear you so turned up the volume, next thing is your music intro and it was blasting. Hoping this is constructive criticism to otherwise great videos, editing, and not an annoying voice like 90% of YT vids.
Have you ever tried these strap rings that attach to the fork bolts? I love them on my yamaha, but un-sure if they will work with my ktm. www.revzilla.com/motorcycle/moose-racing-strap-rings
Enduro VEX from my point of view its 100x better than a trailer, easy to tie down without passing straps trough wheels, the multiple attached points make your life way much easier. the best system for 3 bikes imo
@@endurovex7272 me, 3 childs and a wife that ride with me! 😀 was a nightmate to tie down my 3 bikes before i made this rack. photos.app.goo.gl/ZVqFKUoqKre6gZFeA even with 2 bikes, its easier photos.app.goo.gl/eZQFtGkRySaXxsUX7
There was an issue with the promo code for the first few hours, but it has been fixed. Enter the code TDBC2018 upon checking out and it will provide an awesome discount to Dirt Bike Channel viewers.
Whats your email, i want to show you what i made... its for a trailer
The promo code doesn't work :( Could you check with them?
@@nataitchison9433 been trying to find something for my utility trailer. Care to share?
I built one of these years ago when I lived in the city. Only difference is I had a piece that went over the front tire so I could put a heavy duty lock.
Your videos have been getting better and better. I am embarrassed now that I wasn't much of a fan when I found your channel. LOL. Thanks for having a channel for dirt bikes.
All I do is turn over a bike stand and put into the center. Take the center bike and push up against the bike stand, this will offset the bars so all three bikes can be tied down. This system Kyle shows does make it easier for where the tie downs go. Don’t have to worry about putting straps through spokes etc. if I was traveling a lot with three bikes, definitely worth it.
Nice Review! Loving the channel! Getting the family into dirtbiking soon and this has been a valuable resource!
FYI, Not sure if you've done it, but even if the tailgate wont latch you can lift the tailgate and loop the support wires around the pins on the side of the bed where the tailgate would latch, gives a little extra peace of mind!
Thanks again for the great channel!
Nice system. I might need to spring for it. I recently installed some L track across the front of my aluminum Super Duty for hauling 3 bikes and I am not thrilled with the flex in the front of the bed.
Kyles - I’m a fan of the channel and your content and hate to be “that guy” critiquing things - but to share a constructive thought - might want to think twice about riding up a ramp especially without a helmet. I’m sure you’ve seen all the videos where this goes south and I’ve seen it in person over my 40+ year riding career. Just needs to go bad once.
Just a thought..
We use a cooler, same idea but it has some cold beer for for after the ride
I guess we are gonna see some trials content?!?!?
There sure is nothing better than a Nice Rack.
I just Bought one, THANK YOU Kyle, Got a Really Good discount, i appreciate it.
Me and my buddies just put the 3rd bike in backwards and strap against the tailgate, works out great
Nice. Like how u ride the bikes into the truck evem the middle one at a slight angle
Little tip for your tailgate, take the wire that holds it up and hook it over the post that the tailgate clips onto, it doesn’t close it but holds it up so that you can put a gear bag back there and it won’t fall out
The risk with doing this is most tailgates pull out of the pivot pins at the half open angle. So your tailgate can actually come right off if it bounces around at that angle. Ask me how I know…
Cool idea. I got lots of square tubing and big pipe.... hmmm plasma n stick welder n couple hours.... some paint.... turn buckel things from the old camper.... awesome... lol. Or just buy the darn thing cuz its cool...
and ALL this time I thought a few eye bolts in the bed would work.......I must be dumb, or not. It has worked for me for the past 40+ years.
Or put eye bolts in the bed under each peg and strap from peg to eye bolt. Use a bike stand to offset middle bike. Use straps from forks to sides to hold bikes forward.
You should do some videos with ktm's and bcm' s 😉
Looks cool, but I’ve always just used a big wood log that’s split in half to offset the middle bike. Works just as well if not better seeing how that thing robs you of at least 6 inches up front
Liberty or death, what we so proudly hail
One you provoke her, rattling of her tail
Never begins it, never, but once engaged...
Never surrenders, showing the fangs of rage
Don't tread on me
So be it
Threaten no more
To secure peace is to prepare for war
So be it
Settle the score
Touch me again for the words you'll hear evermore...
Don't treag on me
Love it or leave it, she with the deadly bite
Quick is the blue tongue, forked as the lightning strike
Shining with brightness, always on surveillance
The eyes, they never close, emblem of vigilance
Don't tread on me
So be it
Threaten no more
To secure peace is to prepare for war
So be it
Settle the score
Touch me again for the words you'll hear evermore...
Don't tread on me
So be it
Threaten no more
To secure peace is to prepare for war
Liberty or death, what we so proudly hail
Once you provoke her, rattling of her tail
So be it
Threaten no more
To secure peace is to prepare for war
So be it
Settle the score
Touch me again for the words you'll hear evermore...
Don't tread on me
Bravo company manufacturing for lifeeeeee
Outside bikes forward, tires turned to meet in middle. Middle bike reversed in, back tire against the other two. Easy and free
Kind of a nightmare for strap points on the outside bikes that way isn’t it?
@@ThisTall kinda but its free
What a gr8 rack & to be removable awesome
This is nothing short of amazing!
Now I need to get 2 more bikes!
Mike Sanders b
where is the third motorcycle. I can see only 2 and a bicycle..
"a bicycle" ... let's see you challenge Toni Bou at a trials section, then we'll see who knows how to ride.
some of the best enduro riders in the world are champs on that so called "bicycle"
so how do we do? you call him to set up a meeting or what ?!
Very cool product!! Thanks for the review and discount Kyle!!
I'm sure he has a "Fan Club". Do your own search, explain your skill level and accomplishments and offer to challenge him -- you can even create two sections: one that he designs and one that you design. May the best rider win. I know on whom I would place my bet.
cool and helpfull rack!
Cheers buddy
Interesting system , go the trials bike they are so rad!
You should put the soft loop of you tie downs around the forks just above the bottom triple clamp......works much better than the handle bars...
Pretty slick setup there !!
you skipped the most important part
strapping it down!
did compress the forks with the ratchet straps?
did put anything under the frame to support it?
Hell yea badass rack!
Excellent review like all of your videos. I wish the promo code still worked. Looks like it must have been a code back in 2018. I’ll scour the used market place for this. $400 before $55 shipping and $40 in tax seems pretty steep.
Cheers!
I've gotten 3 bikes in. The middle bike, mine, had the fork saver so the handle bars were up, the other 2 bikes did not, so the forks were compressed more.
Love this
That discount code does not work anymore. Has it expired? Does anyone have an active code? Looks like a nice product, but costs close to 4 times as much as some of the bolt on options.
Great system Kyle. Don't know if you've seen Risk Racings Lock N Load system but it the opposite of great. Huge fail.
What's wrong with it
@@brandonprouse9188 heres my experience. ruclips.net/video/LGzORvAZ5bc/видео.html
Love your videos, hello from Indiana
Is there any way to take the tie down around the tire and apply enough pressure to hold tire in the clamp? This way you don't end up putting so much pressure on fork springs and seals. Nice product it looks well made.
Is the promo code working? Is it still available to use for a current purchase?
Nice job.
What ramp is that you have ? I've been looking for one like that!
DyrtRyder looks like the revarc that I have. They are about 200 bucks but worth every penny
Awesome review! Thank you!
Hey Kyle,
How far back of an offset do you get with this setup?
I’m looking to buy a tunneau cover the Revolver X4S by Back Industries. I can’t find any info of how far of an offset, or how much room you actually have. Which would obviously determine which tunneau cover you could run with this system.
Hey Kyle, I’m 14 and just picked up a 2017 Ktm 150xcw. How did you like yours.
Tyler Ski he has a few vids just search dirt bike channel ktm 150 xc-w and all the vids show up
Is this only for dirtbikes? Looking for something nice to transport my sportbikes.
Kyle this is the dream man, big truck and dirt bikes. What year and model is your truck?
Flippin trials bike, oh my gosh, amaziiiinnng
But really, epic
What is that thing? Do a review on it.
Jason Nadler and hes probably gonna complain aboit the gearing😂😂😂
I just ordered this, teh promo code is over but sent message they should renew it... right now for black Friday they have a new code 15% off
So if painted sides smaller tub like a ranger would not work
Can allways fit 3 bikes allways have the middle one facing backwards fits onto small trailer aswell quite sketchy but worka
I've had 4 bikes in my truck once. 2 forward, 2 back.
Bwdeaton stack em up I wouldn't care if I wanted to get the bikes on they wouod be on ha wouldnt need a rack
Careful pulling bikes loaded backwards on trailers... had a atv come in the shop for repairs.... engine was full of dust from a 20 mile dirt road run to the camp... tried to start the honda 500 n bent the rod.... plug the exhaust when backwards
Let’s see a trials bike video!!
Do you know if this would work for two bagger Harley's, two big bikes
Mr B, what brand is that trials bike and any chance you might do a video on it please ?
Without the rack Strap them good with turning the wheels and the tailgate will shut
Looks like a fantastic product but they are very steep on prices without offering free shipping
Are there product for super sport bikes?
What do you think about those Battlecross X30's?
Use your center stand to off set the third and call it a day!
rodie4352 I have done this as well but you must admit that having an anchor point that extends past the truck box is pretty awsome. We had a strap come off on a dirt road and one bike damaged the others rad and ruined the ride day for my buddy!!
Dave Riley thats no bueno! If ya wanna get fancy get those anchors that go in the bed stake holes.
That’s what I have been doing! Stand works just fine and it stores under my bike when not in the truck bed ;)
Do they make these that utilize the track system in trucks? That would be super convenient!
What kind of track system?
Nissan's Utilitrac system
do your ramps fit in there too?
What about if I have a weatherguard tool box in the bed?
DAng that thing is awesome
I was very nervous putting my brand new beach cruiser on this rack. ruclips.net/user/postUgkxG6JIgwJhur8_Rg8UeQ3EmePzi_wSncL8 But after reading many reviews I decided to get this one and take a chance. When arrived it was very simple to adjust and put together. I also added spike tape over the metal hooks before securing and tightening the straps, and no scratches. I also purchased the top bar made by the same company so that my cruiser sits straight on the rack without having to turn upside down. Extra bungee cords are used to secure the front wheel from flapping and even piece of mind knowing your bike is secure. Definitely recommend...
The middle bike would be hanging off the back of my tailgate. Short bed problems I'll just put the middle bike backwards like I have ever time I needed to move three bike
Is this the guy from american pickers?
Can we put 4 bikes?
When did you get trials bike?
Just put the one in the middle backwards and you’ve saved your set however much that rack thingy cost lol
Do you have an updated discount code?
The promo code does not work. “This coupon is only valid for specific products”. ??? And if you want orange chocks the price goes up to $399...
I just sent them an email to see if they can sort that out.
Is there anything similar for a cargo van ??
Nice!
That's a copy of John Nicholas rack he designed and built about 10 years ago. It looks to be changed enough to get around the copy right.
I would mount it all the way fwd thought
really need to find a way to lock these down so ppl cant mess with them while im in a hotel.
dig the Costco flannel. I got the same one lol
What about smaller bikes? Like 50cc or 65cc?
slimchancejw the orange brackets will be too high on the tires, looks like its design for full size bike only
I think y’all are missing the point here..... I’ve never seen anyone ride the bike into the truck like that. Must be a trails thing!!!! WOW
Hi Will you send it to Europe for me?
make another dirt bike video with your sons please
What a Kyle
Think this is still the best? Except for a trailer of course haha
Great video except please work on the volume difference between your music and your speech. Couldn’t hear you so turned up the volume, next thing is your music intro and it was blasting. Hoping this is constructive criticism to otherwise great videos, editing, and not an annoying voice like 90% of YT vids.
🏍💨
What ever happen to your cr250? Project?
When did you start doing commercials?
Trials bike???
BCM Niccce
Have you ever tried these strap rings that attach to the fork bolts? I love them on my yamaha, but un-sure if they will work with my ktm. www.revzilla.com/motorcycle/moose-racing-strap-rings
Put 3 real dirt bikes on a quad cab Tacoma short bed .. then let’s see a video
Why not just buy a trailrr, problem solved
How much is that
Hi
Just get three of these. No straps needed. Super easy! ruclips.net/video/-UQ65HQke9M/видео.html
Waste of money to be honest.
Enduro VEX from my point of view its 100x better than a trailer, easy to tie down without passing straps trough wheels, the multiple attached points make your life way much easier. the best system for 3 bikes imo
cadwarrior I guess if you do 3 but who has 3 bikes to go ride?
350.00 for a square tube and a few metal plates. Life is getting to costly for me !
@@endurovex7272 me, 3 childs and a wife that ride with me! 😀 was a nightmate to tie down my 3 bikes before i made this rack. photos.app.goo.gl/ZVqFKUoqKre6gZFeA even with 2 bikes, its easier photos.app.goo.gl/eZQFtGkRySaXxsUX7