What’s the trick to getting some mile an hour out of the scooters with the 70 cc bore kit and how much difference does the yasuni pipe make then a Leo pipe?
You can get a polini Schock block it makes you're scooter taller while you use the same shocks you can also adjust it. In dutch it's called polini ophoogblok. Maybe that helps
I think you would really like a piaggio typhoon. They are super comfy, fast, have great seats and suspension for wheelies. Way better bike than a bugeye zuma imo. I have 3 bug eyes right now but I never ride them, just flip them to fund other builds.
Please reinforce the frame in the middle at the floor, because the Jogs are notorious for bending in half og just snapping on the middle when you wheelie them especially. but love the content keep it up
@@MOPBOYZah, I see. I bought those a while back and they fit like crap. Never ran them. Still running the us/Canada headset for now. The jdm controls are different to fyi. Get them with the bars if you can.
Finally a jog update, love to see it bro and that is pretty fast fan from Surinane i like jogs and this is one of te best jogs ive seen. And is this one of the fastest scooters you have?
What's the trick for these scoots going so damned fast? I have a 1982 Honda Nu50 Urban express with a 70cc big bore kit, pipe, carb, belt and other stuff, and I run outta variator at 34 mph, run outta rpm at 45. Regardless, love the build! That's a sweet looking and sounding scooter!
Hi mop. i have quetion about my moped and i wish you can help me. on mp mopeds motor i have 21 carbuetor, sstage 6 inntake kit and 70cc racing ssstage 6 cylinder kit and everything else is stock and my moped only goes 60km/h but why it goess only 60?
Greetings, I have an aprilia sr50 (minarelli horizontal lc) and it doesn't pull as well as it should, I would like it to pull the two setups: Malossi mhr replica 70cc Malossi mhr variator Stage6 clutch Black springs in the clutch Red main spring 4.5 gram roller Dellorto 19mm carburetor Top performance shaft
Hello you are my last resort, my scooter was running perfect, after a rain back home, next day, turn on easily revs high but doesnt move, i try, new spark plug, change cdi box, checked all the cvt clucth and variator, belt all good, check magnetic flywheel seen fine , since she starts revs high but doesnt move, looks like symptons of over rich but umpossible since she was riding perfect before that rain, a total mysteri to me, any advice or idea you have come across something like this, i can just assume that as the rain, but stange, best regards
Hi. Tell me why there is a failure during acceleration for 2 or 3 seconds, and only then the engine spins up. This is not a transmission. I know it's a carburetor, but what exactly is it? Ps: I use honda dio
might not be getting enough fuel on idle, or try tilting your carb inside the intake a bit to compensate for the wheelies, that’s what i do on my prebugs
i know jogs and if i was you i would see if i could find a new front fork the one jogs have is not so good try an se if you could get at aprilia sonic one or just any other
I’m gonna need a ride a racing cylinder to see why everybody says not to do it. Because at this point it’s very attractive. Current setup: NCY 82 and V8 pipe
finally a jog update, love to see it
yessir!
I'm on a moped kick these days, my stock 86 Jog will be up for sale soon. Hate to see it go, but gotta thin the herd a bit. Great build Trevor!
Yoooo das craazyy clean. Cant wait for the fine tuning💯
yessir 💪 gears are gonna make a worlds difference
Agreed!
Neibors can’t say shit about loud sounds bro just mowing his lawn fr
Been waiting for your first ride reaction. My jog is what hooked me on scooters.
straight ripper!
That Scoot is sick! I am in the middle of building my Bugeye right now after watching your videos. Keep it up!
awesome man! thanks
Finally been waiting for a jog update love the vids! keep it up
What’s the trick to getting some mile an hour out of the scooters with the 70 cc bore kit and how much difference does the yasuni pipe make then a Leo pipe?
Nice. I just got a new bike today ! and I fully built my genuine buddy it’s amazing now.
U know where i can buy zuma prebug? I live in the Netherlands but want one so bad because no one has it here.
i have one what kinda electricity does it need cause i have none and i wanna fix it
Hello from denmark i also have a jog as and 2 jog r the small jogs are quiet popular here some people put a 100 cc 2 fast aand more on them
Where do you order gears for minerali motors (beta ark 50cc LC)
You can get a polini Schock block it makes you're scooter taller while you use the same shocks you can also adjust it.
In dutch it's called polini ophoogblok. Maybe that helps
Hey I have a question do you know where I can find turn signals for a 2000 50cc zuma oem brand new or used but clean ??
Do you guys have anything going on in Australia? I have a Jog CV50 and there’s some cool builds over here
I think you would really like a piaggio typhoon. They are super comfy, fast, have great seats and suspension for wheelies. Way better bike than a bugeye zuma imo. I have 3 bug eyes right now but I never ride them, just flip them to fund other builds.
I love 2 strokes so much. It is so easy to make them faster as well. Great video. 😻😺🙂
2stroke god word Is bond man’s killing it every time 😤⚠️
I live in Las Vegas do yk where I can buy a sym
Doing that drilling to the frame doesn't mess with structural integrity?
wghat gearing do you plan to run? is there a gearing calculator somewhere?
when are you doing 100cc 2fast or yamaha jog 125cc kit????
Is anyone know what engine is 2012 ningbo gtx ?
Thats been a problem with every Jog Ive owned, smackin the exhaust on the ground
Slightly longer shock helps a lot. Cant go much if running stock airbox.
Same here 🙂↕️
Every minarelli engine has this issue with stock shocks
Love to see it 🛵
Hate to see it end
Holy Crap!!!! So nice, It's so perfect! ! such an awesome build so far! one of your best for sure 🤘
thanks man!
Please reinforce the frame in the middle at the floor, because the Jogs are notorious for bending in half og just snapping on the middle when you wheelie them especially. but love the content keep it up
good to know!
My 1987 jog has a 2fast 100 engine on it and goes 3.9 0-60. You should make a dragy video.
you can buy a raiser for your rear shock, makes it easier to wheelie aswell.
yessir , stock shock is still to soft tho. way too bouncy
Man I did it! I found a 1995 Honda elite sr! Got it and a 1989 elite e for $900, it’s time to start the af16 build!
awesome dude ! get r done
Dannng who showed you the frame mod and city16? He must be a cool guy.
The old jogs are Sick 🤩
What exhaust u bought for the mk2?
you konw that you can take a aprila sonic front fork and put it on your Jog, it works on a Yamaha Jog As.
then you also get disc brakes
Where are you finding the jdm headset parts new?
alliexpress
@@MOPBOYZah, I see. I bought those a while back and they fit like crap. Never ran them. Still running the us/Canada headset for now. The jdm controls are different to fyi. Get them with the bars if you can.
Pretty sure the jdm jog uses the same controls as an early prebug. They look the same from what I remember.
What gear are you putting in? What ratio
I know what you mean with the small rippers. Swapped a fully built af16 in my spree 😎.
What gears are you going to put in?
i Love MopBoyz! another banger in the books
thanks my guy!
@@MOPBOYZ no, thank you mayn
Where did you buy the kickstand AND NICE JOG
alliexpress! thanks man
Finally a jog update, love to see it bro and that is pretty fast fan from Surinane i like jogs and this is one of te best jogs ive seen. And is this one of the fastest scooters you have?
thanks man! fastest scooters i have is the rcone swapped derbi and my phantom f12!
@@MOPBOYZ is the jog as fast as the 120cc stroker or is the stroker faster
@@abdelzichem5192 not too sure yet we’ll have to see after the gears and everything i do to the jog 🤟🏻
@@MOPBOYZ can't wait dude. Keep up de content
What's the trick for these scoots going so damned fast? I have a 1982 Honda Nu50 Urban express with a 70cc big bore kit, pipe, carb, belt and other stuff, and I run outta variator at 34 mph, run outta rpm at 45. Regardless, love the build! That's a sweet looking and sounding scooter!
Trevor coming through with the best videos , so sick keep killing it bro
thanks bro!
Damn! Thats sick Jog my dude. Im planning to pump up my Derbi Hunter in the future. Keep the good contend
if the exhaust smacks the ground just flip the subframe the jogs have the same issue as an aerox
i hope you could make a video about Honda Zook and make it faster, more power and thanks
Maybe you should make an 1/8 Miler and take it to the track. That'd be fun to see. 👍👍
I have an 1987 jog with a horizontal engine and it's a 2fast 100 setup goes 3.9 0-60mph and high 7's in the 8th mile.
Wish I could post videos or pics in these comments
You should get the front end from a aprilia sonic the sonic front end has bigger forks as well as discbrake
i would def like better suspension front and back on this scooter, it sits way too low
Hi mop. i have quetion about my moped and i wish you can help me. on mp mopeds motor i have 21 carbuetor, sstage 6 inntake kit and 70cc racing ssstage 6 cylinder kit and everything else is stock and my moped only goes 60km/h but why it goess only 60?
without seeing it i couldn’t tell ya , but if everything else is stock that’s why, you need an exhaust for a setup like that man!
U need to get a yasuni c16/c21. And maybe upgrade carb to 24-28 mm. I would recommend italkit 28mm and c21 with a overrange kit
CDi
I want to buy Yasuni pipes. Where can I order them. ?
link in description !
@@MOPBOYZ thank you bro.
Greetings, I have an aprilia sr50 (minarelli horizontal lc) and it doesn't pull as well as it should, I would like it to pull the two setups:
Malossi mhr replica 70cc
Malossi mhr variator
Stage6 clutch
Black springs in the clutch
Red main spring
4.5 gram roller
Dellorto 19mm carburetor
Top performance shaft
I was thinking of putting a black stage6 main spring and white malossi springs in the clutch
What stand is that?? Need one for mine.
just a jog side stand off aliexpress
The “Artistc Spec” head set is the best one for these jogs
My vino had a filter that slides up into the tank, didn't look like one is there but might be
the jogs have a filter inside the stock petcock , but since i removed the petcock was left with no filter
Hello you are my last resort, my scooter was running perfect, after a rain back home, next day, turn on easily revs high but doesnt move, i try, new spark plug, change cdi box, checked all the cvt clucth and variator, belt all good, check magnetic flywheel seen fine , since she starts revs high but doesnt move, looks like symptons of over rich but umpossible since she was riding perfect before that rain, a total mysteri to me, any advice or idea you have come across something like this, i can just assume that as the rain, but stange, best regards
bro what is the intro music called
Hi. Tell me why there is a failure during acceleration for 2 or 3 seconds, and only then the engine spins up. This is not a transmission. I know it's a carburetor, but what exactly is it?
Ps: I use honda dio
could be too much fuel or not enough fuel , depends on if it’s a gargle sound or a deep bog
Are you running the original carburetor?
polini cp21!
try to make a lc one with 2fast or mount a pvl ignition to this one
I have a Yamaha jog and when i'm doing a coaster it stalls (because the big angle i think) how can i fix that?
might not be getting enough fuel on idle, or try tilting your carb inside the intake a bit to compensate for the wheelies, that’s what i do on my prebugs
I haven't tried tilting it yet. Thanks for your advice👍
To be honest i think it will be as fast as the f12 maybe faster depends on what gearing. Are you going up on speed or down with gears?
taller gears so more top speed
@@MOPBOYZ ye I think its going to be as fast or faster that the f12
Dude..and here i ride with my stock chinese scoot😂really cool what u did there. subscribed!!!
Do you change the CDI for higher revs?
there’s no cdi restrictors on most 2 strokes
why dont u need to process the cylinder so it doesnt break?
cause this was an already running cylinder off my f12 , it’s not a brand new one
Insane 😅 I love it
Which cylinder is in the jog Right now?
stage 6 race cyl
What carb are u running?
polini cp21
What did qmb mean
You did your thing on this one
💪
Please do a build with 2 fast 100cc or 2 fast 70cc they are both very very fast
seit wann gibts scooter tuner in amerika
You should see if you can get a genuine roughhouse 2 stroke that’s what I have rn 💪
i had one years ago, that’s one of the first 2 strokes that was on the channel!
What carb is that?
polini cp21
What is the configuration?
watch the motor build vid before this one!
Those speedos peg at 55mph with OEM tires.
Your intro song sound like a song called "y de pronto un accidente y dio como resultado"
yayyyy!!! new video is fire 💪💪
thanks bro !
Love the bike u make the builds looks too easy keep it up
Fuck it looks so clean with that pipe 🤤
Can i ask a question?
Nice dude!!!!
Do a Honda today build 🙏🏻🙏🏻
Another banger bro
Dude that is FUCKING AWESOME
Sooo sweet dude🙏
Your vids have been a Inso for my channel. Looks like you need to be careful riding this one. Bonkers.
i know jogs and if i was you i would see if i could find a new front fork the one jogs have is not so good try an se if you could get at aprilia sonic one or just any other
yea and try to finds a taller shock ind the back it would rid much better
Get a Vastro pipe it will hit even harder
build a yamha slider
I’m gonna need a ride a racing cylinder to see why everybody says not to do it. Because at this point it’s very attractive.
Current setup: NCY 82 and V8 pipe
whoever told you that lied to you bro haha. literally only cylinder i wouldn’t run is the ncy i promise
Bro sick videos, but its time for an aerox
i’m in america
put somw street handlebars
50 seconds ago is crazy
can you come to slovakia and make my scooter riping like you know best?
nice love the vids
thanks man!
Try a piaggio zip
i wish bro
@@MOPBOYZ whats stopping you
@@xphya i’m in america
@@MOPBOYZ you cant get them in America?
illegal and never sold here
She looks sweet!
thanks dude !
50cc?
70cc
Build a gilera runner 172cc
they’re not in america
@MOPBOYZ my bad bro.I'm from UK. Should build some sort of 172/183.👊🏼