There is none that I found. As far as I know the catalytic converter to be taken out first, then the turbo and finally the manifold. Be careful when you put it back as the exhaust manifold bolts are prone to break if you over tighten the nuts. Do the oil filter housing gasket change if you are doing this job along with it and the oil pressure sensor change as you are already there.
Most descriptive video ive ever seen, thank you, did you have any issues with codes when running the car without the alternator running on the belt?
I did not check the error code. There should be error code for alternator for sure
@@bimmerhacks sweet, doing the same job this weekend so I'll see what happens
@Sovereign465 make sure you don't do more than finger tight if you're taking off the friction pulley
@bimmerhacks thank you, ill make sure 😁
Can you name a video showing how to take off the exhaust manifold on this car
There is none that I found. As far as I know the catalytic converter to be taken out first, then the turbo and finally the manifold. Be careful when you put it back as the exhaust manifold bolts are prone to break if you over tighten the nuts.
Do the oil filter housing gasket change if you are doing this job along with it and the oil pressure sensor change as you are already there.
@@bimmerhacks thanks I will do that