Very great video! I have several motors that I will be building using your design! BTW, never mind the 217 IDIOTS who put thumbs down. They are lacking mental capacity to even understand much of anything, much less, this video. I bet they are too stupid to even know how to thread a nut on a bolt. I also have several Hypertough drills that all I have to do is put the threaded rod in the drill chuck and tighten it. Then open the plastic case and solder in wires to control it with. I'm going to build a mini-excavator with the actuators I build. The base of the excavator will be 2 to 3 square foot at most. It will be a toy, however, still big enough to actually dig a sewer line! It will be on a cart, and my body weight as the counter weight. I expect the digging bucket, or scooper, to be maybe 1 foot wide at most. I am already in to toy RC heavy equipment, 1/14th scale, and have several machines, and buying even more. I wish I could find 1/8th, but nothing is available. I give you a solid thumbs up, best actuator video I have seen so far!
what if we line up a bunch of these motors, next to each other and form a grid. Next thing you do is plug them to a arduino and sync them with a wave function or something like this dribbble.com/shots/6945228-Dot-Grid and bam you have a real tangible topographical map. Image taking google maps data and moving across landscape with this thing. That would be cool.
I'm sorry everyone but this is NOT a linear motor. This is a DIY linear actuator (the clue is that there's a rotary electric motor at one end). A true linear motor is just as it says: an electric motor that is laid out in a linear fashion as opposed to a circular one. They're quite awesome.
You cant build an actuator with epoxy glue and scrap plastic. Is this for chickens? you know how strong a Linear actuator needs to be. one wrong move, it will crash like a house of sand.
Does this have any backlash issue? I am planning to make one which will take my camera in and out. So any backlash or shaking will ruin my footage. Thanks in advance.
youd either need to find a way to reverse the polarity, which can be done with some special switches, or use a servo motor, designed to move backwards and forwards
This is possibly the worst way of doing this ive ever seen,take the gear off the motor, drill a small hole in end of the lead screw, then one in the side for a grub screw. Done..
Nicely made and it is so simple yet effective. Very inexpensive too. Hats off to you.
Smooth really works good
Bro, you build some of the most amazing stuff. Keep up the great work!!!!!
using H bridge for dc motor would be useful for you to control easily
Simple speed controller for RC electric motors
Which motor is used in. This ?
this saved my ass for a project thank you sir
Oelhor vídeos que já vi parabéns fãs mais desse
Very great video! I have several motors that I will be building using your design! BTW, never mind the 217 IDIOTS who put thumbs down. They are lacking mental capacity to even understand much of anything, much less, this video. I bet they are too stupid to even know how to thread a nut on a bolt. I also have several Hypertough drills that all I have to do is put the threaded rod in the drill chuck and tighten it. Then open the plastic case and solder in wires to control it with. I'm going to build a mini-excavator with the actuators I build. The base of the excavator will be 2 to 3 square foot at most. It will be a toy, however, still big enough to actually dig a sewer line! It will be on a cart, and my body weight as the counter weight. I expect the digging bucket, or scooper, to be maybe 1 foot wide at most. I am already in to toy RC heavy equipment, 1/14th scale, and have several machines, and buying even more. I wish I could find 1/8th, but nothing is available. I give you a solid thumbs up, best actuator video I have seen so far!
you sir just gave me a brillant idea
what if we line up a bunch of these motors, next to each other and form a grid. Next thing you do is plug them to a arduino and sync them with a wave function or something like this dribbble.com/shots/6945228-Dot-Grid and bam you have a real tangible topographical map. Image taking google maps data and moving across landscape with this thing. That would be cool.
of course you would need smaller motors and a lot of free time. Wich i dont have on me rn
One of your best videos... great idea.
How much it can lift would be interesting.
Very good idea thanks
شكرا جزيلا على هذه الفكره الرائعه
Finally I found after 6 year 😢😢😢
Thanks bro. 🔥🔥🔥🔥
Buen vídeo 👍me gustó
Nice build. Very clean.
"How to make a powerful electric actualter [sic]" *actuator
👍👍👍
If this is american tech, then iam an indian...
So cool if you reverse the wires the motor spins in opposite directions?
Yes
you can wire a dpdt switch to the motor to make it spin in the opposite direction
for 2kg of material movement which solenoid we should use
Puede ser una tonelada sobre hielo y con poco esfuerzo lo mueves
I'm sorry everyone but this is NOT a linear motor. This is a DIY linear actuator (the clue is that there's a rotary electric motor at one end). A true linear motor is just as it says: an electric motor that is laid out in a linear fashion as opposed to a circular one. They're quite awesome.
But this works just d same
vvvvv good man you are so genious
American tech... from india... ugh, this f'in world and its people
Shut your white ass up. No one likes a racist person
@@romirbakshi828 HAHAHAHAHAHAAH! truth hurts, is more like it! Aint a racist bone in my body, buddy
@@romirbakshi828 and btw, re-read YOUR racist comment, dork, then read a f'in book, please and thank you, "American" tech!
thank you so much
which motor u used?
what substance was used to make pipe?
DC brushless motor 6V,
Plastic: Acrylic.
Which motor used in this video?
My hat goes off to you
Sir, what is the motor and what it means to move back and forth? Change the bridge and push wire. Change the connection. How it will work.
Muito bom!
How make it have three steps like a beginning midway and end stage's
What was in the syringe
You cant build an actuator with epoxy glue and scrap plastic. Is this for chickens? you know how strong a Linear actuator needs to be. one wrong move, it will crash like a house of sand.
Not power full enough....only glue? U should weld or ad screw adapter....or Just buy parabolic rotator..that was cheap enogh..
Superb
What did you used for make this mecanism ? and how many volt did it used ?
Sorry for that question, i need to create this one for a cosplay project :s
It looks like 12V motor
Does this have any backlash issue? I am planning to make one which will take my camera in and out. So any backlash or shaking will ruin my footage. Thanks in advance.
Ayaaaaa!! U spoiler that metal gear.use hot glue gun no?!!
can you make a video to make a module or how to install a dc motor that can rotate left and right?
By using Rocker switch,you can get
But good
Of no real use, needs to be manually stopped at either end of travel to prevent disaster
Just add limit switches at each end that break the circuit and stops the motion
First clue is the exceptionally long fingernails lending a hand to this mind blowing "india" technology crap
❤
It doesn't work ☹️
IT DOES WORK!!! You are an idiot my friend! I have built two of these actuators and I use them on my RC dump truck.
What is that blue sheet?
Enjoy the video, but don't make it.Without limit switches doesn't it keep spinning??? Show where you have installed and used it
if do you want to make it back and forth, how?
youd either need to find a way to reverse the polarity, which can be done with some special switches, or use a servo motor, designed to move backwards and forwards
Does anyone know what kind of motor is used in this video?
DC drill motor
360 DC motor
12v motor.heavy load
😂😂😂😂
What the hell is an "actaultor" ???
رائع جداً 👍
You are Indian or American
load?
Probably been cool if there was an h bridge out of relays to control this
You could probably stick an L298 in there
How to make cap
Moter ki Rpm kitni hi
You can find something like this on the Avasva page. Full step-by-step instructions right on your desk.
This is possibly the worst way of doing this ive ever seen,take the gear off the motor, drill a small hole in end of the lead screw, then one in the side for a grub screw. Done..
Music ki koi jarurat Nahi he inkebadle comentry do to like jadamilegy
cool!
Electronic hydraulic
29:00 30:00 he gave a``Nada'' hindu good luck charm thread that's mean he is indian kya chutiyapa h yrrr
Cheap on ebay
इलेक्ट्रिक साईंलैंडर बोलो आना है ऑर्डर पर आपका कांटेक्ट नंबर एवं इसकी कीमत देने की कृपा करें
ข่าว
要嚟做乜撚嘢㗎???
It's waste
😅👎
Usedless n hard also bakvash