FX dual transfer port install

Поделиться
HTML-код
  • Опубликовано: 29 окт 2024

Комментарии • 30

  • @ebr-fan1117
    @ebr-fan1117 4 года назад

    Thanks for always helping educate the airgun community Ernest.

  • @franciscocarvalho2424
    @franciscocarvalho2424 4 года назад

    Só posso dizer parabéns é sucesso é que sonho com uma ainda customizada por você só felicidade like garantido sempre vídeos top

  • @TheVllade
    @TheVllade 4 года назад

    thanks for sharing your knowledge, i already learned a lot to see your vidios ... a hug from Portugal
    It is possible to buy, and send to Portugal

  • @jackdaniels7913
    @jackdaniels7913 4 года назад +1

    Hope they come pre-center punched to save some confusion and possible stress on those of us that are less incline on the modification front but still want to make the most of an amazing tool/ mod.
    🥃cheers🍻

    • @ernestrowe5061
      @ernestrowe5061  4 года назад +2

      -> the milled alignment slot is your center reference to drill the low power TP

  • @Lucas-ix8bg
    @Lucas-ix8bg 11 месяцев назад

    What is the outer diameter of the brass tube/port? Is it 12mm?

  • @aubreylukebird7403
    @aubreylukebird7403 2 года назад

    Thank was good I got this barrel ...but can it fire off slugs

  • @derrickmitchell39dm
    @derrickmitchell39dm 3 года назад

    Hey Ernest, you got one of those for a
    Impact .357?

  • @nekeke1
    @nekeke1 4 года назад

    Thank you!.

  • @chrisfigueroa3361
    @chrisfigueroa3361 4 года назад

    I got it today in the mail looks awesome one question what's that extra oring for the inside of the barrel sleeve hmm

    • @ernestrowe5061
      @ernestrowe5061  4 года назад +1

      Chris Figueroa --extra probe oring, its little larger then standard to last longer without affecting accuracy

  • @waynelinsenbach153
    @waynelinsenbach153 3 года назад

    I'm looking for one for my FX Crown M1.

  • @fathertimencUSA
    @fathertimencUSA 4 года назад

    Mine come with it. Just found out today that’s why my velocity was down even with the regulator turned up. They shipped it to me with the small barrel port side down.

  • @rajivkotwal
    @rajivkotwal Год назад

    Thanks

  • @chrisfigueroa3361
    @chrisfigueroa3361 4 года назад +1

    Thanks ernest awesome stuff...I got a leak on my impact boo woo 😭

    • @ernestrowe5061
      @ernestrowe5061  4 года назад +3

      Chris Figueroa fix it

    • @chrisfigueroa3361
      @chrisfigueroa3361 4 года назад

      @@ernestrowe5061 I don't know how... I had my gun set to shoot 36.2 gr nsa at 935 fps and yesterday I ran out of nsa ..so I took the bottle off blead the air by turning the reg counterclockwise then I lowered the reg to 120 i tuned the gun to shoot 26 gr hybrids at 945 perfect tune spot on at 50 yards left it at 200 bar went work this morning got home it was at 148 bar 😭

    • @peteralexben
      @peteralexben 4 года назад +3

      @@chrisfigueroa3361 the parts that you removed and mounted back, there is a O ring damaged , use silicon lube and new o rings ,or in the regulator they bleed air . use soapwater to find the leak

  • @KevinWood44
    @KevinWood44 3 года назад

    RED locktite??

    • @ernestrowe5061
      @ernestrowe5061  3 года назад

      Blue or red just let cure overnight

    • @KevinWood44
      @KevinWood44 3 года назад

      @@ernestrowe5061 I thought red was permanent and very hard, if not impossible to get off?

    • @ernestrowe5061
      @ernestrowe5061  3 года назад +1

      @@KevinWood44 - funny its easy for me- i just heat enough to break loose- that was easy!

    • @KevinWood44
      @KevinWood44 3 года назад

      @@ernestrowe5061 Well when you need an apprentice, let me know and you can teach me all the tricks 😁

  • @06rkave
    @06rkave 4 года назад

    Dual

    • @ernestrowe5061
      @ernestrowe5061  4 года назад

      R Kave --> Thanks 😊

    • @06rkave
      @06rkave 4 года назад

      @@ernestrowe5061 Thank you, excellent videos