Even though taking out the air restrictors make dry-firing a LOT louder, it does increase the rate of fire because it doesn't have that "lag" if you will after you fire. But it's your gun. I love your vids. Keep up the hard work!!!
Well, you're using the cronograph in the shade, it needs a good source of light to read the darts accurately. I'm surprised it even read any of the darts.
since it's a beefed up hammer shot how about "The Sledgehammer" somthing to think about if you take some stained glass paint you could do a thin coat of it on the clear to give it a slight tint
I would love to see you do one of these with a little more of a barrel, but with painted internals & no orange to REALLY play up to the look of the blaster.
Sweet mod, definitely one I'm going to try, just imagine dual wielding 2 of those. And as for a name I think Good Sam, because it reminds me a lot of Hellboy,s gun.
Hey drac, did you know that you could already do a "minimization" without cutting into it. The back dart holder and the front muzzle pops out if you unscrew it. I just want you to know!
Since you've minimized it into what is essentially a beefy hammershot, why not name it the 'Malletshot', a mallet is a type of hammer so I guess it fits
Drac, nice chronograph. You friend has a very accurate one I can tell Error range of 50fps isn't a big deal. You can't notice it with bare eyes. Only the accurate chronograph are. :)
when you fix the air seal on the plunger rod can you use ducttape? or will that mess up? i wanna mod a hammershot kinda the way that you made the argonaut rev 5
Man, I had the exact idea to cut the back part off this, just like you did! But when it comes to modding, I tried it once, and a spring flew out during the process and I never found it. It wasn't a cheap blaster either, so since then, modding is not a thing I'm keen on. (Sighs in frustration)
I think a simple 1 inch barrel in front of the opening (where there used to be a barrel) will really clean up the profile a bit. Other than that sick build. can't wait for doomlands to become available here i live ( if ever :'( )
I know this name kind of sounds obvious, but I think it should be named the "Lawbreaker" since it is the opposite color scheme of steampunk, so why not have kind of an opposite name?
drac my and my friend Ty found out a way to dry brush on accident so u paint the the area you want dry brush and then take a paper towel and rub it on the paint and it looks just as good
![[MOD GUIDE] How to Modify the Nerf Lawbringer](http://i.ytimg.com/vi/gXvlRikUfnY/mqdefault.jpg)
Call it the lawbreaker
Yeah definitely
The Lawscrewer.
Totally be an awsome name
I was gonna say the same thing #go lawbreaker
JUST DO IT!!!!
Even though taking out the air restrictors make dry-firing a LOT louder, it does increase the rate of fire because it doesn't have that "lag" if you will after you fire. But it's your gun. I love your vids. Keep up the hard work!!!
"The Judge" or "Judgement" (to play off of the "Lawbringer" name).
+That Nintenja You Know I agree here.
+That Nintenja You Know Good ame
That would be cool
I agree
+That Nintenja You Know this dude gets it. :)
so turning it from a babyfied gray trigger to a super orange mod works beast.
Looks like the gun from HellBoy
bro there is a dremel right ther at 2:40
theres no drenol there. are you sure your not thinking that its the screwdriver thats the drenol
ya its not a dremel
+Chris Sunderman actually the thing above the shell was a dremel but they probably just didn't have any cutting bits
i guess he didn't have it on hand? i honestly dont know
I saw that too lol. And yes, it's a dremel
Well, you're using the cronograph in the shade, it needs a good source of light to read the darts accurately. I'm surprised it even read any of the darts.
since it's a beefed up hammer shot how about "The Sledgehammer"
somthing to think about if you take some stained glass paint you could do a thin coat of it on the clear to give it a slight tint
Its a negotiator with 12 shots
Bruh
I would love to see you do one of these with a little more of a barrel, but with painted internals & no orange to REALLY play up to the look of the blaster.
Lawspringer?
Lawfang?
+Sovietkitty good idea
imagine this with a metal hamershot kit in it
Internally it would probably work
Call it the redemption because if your primary fails this will redeem it
That's a sharp looking blaster when 'pistoled'. I can't wait to pick up some when they're closer to the $20 price range (or a Thrift Store Find)
+LordDraconical it looks very similar to the DeadLands Gatling Pistol or the Halo 3 Mauler
I've been looking for this for MONTHS! Thanks Drac!
why are you doing it to an austrailian version
Sweet mod, definitely one I'm going to try, just imagine dual wielding 2 of those. And as for a name I think Good Sam, because it reminds me a lot of Hellboy,s gun.
Call it the Punisher
Good name!
Mjolir cannon? -cuz super hammer shot is kind of a mouthful-
yes...
all of my yes.....it shall be doubed the mjolnir cannon
+Celtic spartan thats why i sugested the Sledge hammer
Ward Nightstone Sounds to much like the Sledge fire from Zombie strike line.
Celtic spartan hmm good point maybe Warhammer then
The hellbringer
+Reece Vince shit i thought i had that idea first
+Cameron Cagan That's copyright from pixelgun
+Andy Tran pixelgun
Nerf gaming15 rly good name... pixelmon pixels u now mabey u get no copywrights but be warned
I love the way it has an almost gothic style look. How about "Helsing"?
You could call it "The Big Iron"
I like that one
Yeeeeessssss
Three years later: what did you name it, Drac?
aaah the elegance of Lord draconical in its finest XD
Drac is my fav youtuber and when he dosent upload i check him like 10 times! Dracs awesome!
I looks like an awesome bulky strong arm/maverick/hammershot sawed off thingy. Great job.
Hey drac, did you know that you could already do a "minimization" without cutting into it. The back dart holder and the front muzzle pops out if you unscrew it. I just want you to know!
Awesome Mod. You should call it The ThorBringer because it the paint looks like the color of Thor's hammer.
just getting into modding. how exactly do you go about improving the seal? my lawbringer seems to have a faulty AR. most times the darts fart out.
this is OP for a pistol type blaster
Metal hammershot kit?
"Ahem" sorry, lawbringer kit? Will the kit fit in this? Ultimate ham-
Lawbringer.
The Low Dusk (like a play on High Noon, to fit your vampire theme)
Since you've minimized it into what is essentially a beefy hammershot, why not name it the 'Malletshot', a mallet is a type of hammer so I guess it fits
Hey I have a question
Can you just use it with the barrel and the stock cut off or do you need to also mod it
Why is there a Dremel at 2:10 you said you didn't have one
Was lookin' 4ward to this for ALONG TIME
This thing is way cool, and looks like something hellboy would use.
here are a few names 1.THE ROUGE 2.THE SLEDGEHAMMER SHOT 3.THE BIG DADDY 4.THE BRASS EMBER AND LAST BUT NOT LEAST 5.THE GEAR SHIFTER
Drac, nice chronograph. You friend has a very accurate one I can tell Error range of 50fps isn't a big deal. You can't notice it with bare eyes. Only the accurate chronograph are.
:)
Doomlands makes me think of Fallout a lot, so I'd say "The Regulator" would be a pretty cool name.
1:35
It's just a bigger Persuader, now, isn't it?
Call it the LawBreaker. You could also call it Jury, Judge, and Executioner, (Kinda ling, but you could call it JJE for short).
"Big Iron" The song from Fallout New Vegas about a gunslinger and his six-shot.
I've been wondering if you can use the aluminum hammer and trigger from orange mod works with the lawbringer.
Isn't the barrel and stock the point of the lawbringer? a hammer shot primary with 7 more shots?
when you fix the air seal on the plunger rod can you use ducttape? or will that mess up? i wanna mod a hammershot kinda the way that you made the argonaut rev 5
That thing is beautiful, looks straight out of Judge Dredd.
Hammer of Justice is my name suggestion, since it now looks like a hamershot and the Justice part because it used to be a lawbringer..
Are you going to put the barrel and stock from the lawbringer on the stryfe like the pic you posted on instagram
Man, I had the exact idea to cut the back part off this, just like you did! But when it comes to modding, I tried it once, and a spring flew out during the process and I never found it. It wasn't a cheap blaster either, so since then, modding is not a thing I'm keen on. (Sighs in frustration)
Would it be possible to eliminate the "frame" of the barrel? Or does the barrel attached the front of it?
Never mind. I see the attachment point. Still curious if that is a necessary price though.
call it the unforgiven?
How bout the gavel?
Fits the hammershot bit and the lawbringer bit
today i moded my lawbringer on my own and then there is a mod guide xD
5:28 your in the sun! You're no vampire!
u use the barrel to make a hand rail from the bottom of the handle to the underside of the main gun chunk
I think a simple 1 inch barrel in front of the opening (where there used to be a barrel) will really clean up the profile a bit. Other than that sick build. can't wait for doomlands to become available here i live ( if ever :'( )
If you used clear polycarbonate that would have looked cool and matched the clear open side but sweet mod
The death bringer cuz It keeps the bringer part of its name and goes along with its literal darker look
Call it the "Executioner". We already have a "Judge", and if you call it the "Executioner" all we'll need is a "Jury".
Actually I'll just name my one that before you see this lol. But first I need to get a Lawbringer and mod it... And that might take a while.
I know this name kind of sounds obvious, but I think it should be named the "Lawbreaker" since it is the opposite color scheme of steampunk, so why not have kind of an opposite name?
I has not seen any of the comments before I sent this
About how much does it weigh, do you think with the stock and barrel off you could dual wield these for a war?
LordDraconial you should name it the hell boy revolver because it looks like that gun from the movie
"The Over-Compensator"
Drac what epoxy putty do you use?
What vinyl dye do you use?
Will The Metal Nerf Hammershot Conversion Kit Work In This Blaster?
can you fit a blasterparts metal hammer in there? just wondering
this thing is just made to be fanned
That looks great! You have convinced me to buy a lawbringer! lol
Marshal Law sounds good, this nerfgun would make a killer handcannon hu drack?
With what did you seal the minimizations
It's double the size and double the capacity of the hammershot
Hey drac how do you deal with stripped screws in your blasters
Lawnbringer mark II?
You should name it the "Voice of Justice", it kind of goes with the original name, Law, justice, and it sounds coolXD
Dude perfect hellboy cosplay
i think the law bringer is a good name on its own.
You should Cut the orange price of the off the original barrel and glue it to the shell
you should paint the gray internals lime or neon green.
If you add a few "blades", you can make it look like a Spiker from Halo
Wonder if a metal hammer for the hammer shot is compatible here
If the spring was, I'm gonna say yes, but I'm new to modding, I'm to stupid to know!
You said you had no access to a dremel but the entire video in the back there's a dremel.
How about "the bloodsucker" it really does seem to fit
Is that the new doomlands persuader?
+lordDraconical would you say your shell cutting was a hack job
crimebringer or law ender, because it seems more of a gunsligner's weapon now
drac my and my friend Ty found out a way to dry brush on accident so u paint the the area you want dry brush and then take a paper towel and rub it on the paint and it looks just as good
Where do u get hammer shot
I think you should off added the barrel muzzle on top of the minimised front
If u make another make it like the winter's howl from Call Of Duty Black Ops One Zombies
everybody get a persuader if you want a doomlands gun they are on most target shelfes and shoot very well without any mods
it looks like a kinda newer version of a Maverick, looks pretty good IMHO
How come you can't dry fire without an air restrictor?
Hammershots are for children, this is a real man's plastic toy gun
What exactly is so bad about dry firing? What does it do?
4:38 yeah, didn't have access to a dremel...
How about the dove, or the infinitely, both are pistols from borderlands with unlimited ammo much like this 12 shot revolver.
is this an ultimate mod guide?
the sledge Hamer shot