On taking off the rear shock. You had it pretty much right but you need to pull it out and put it in where the rear muffler goes but to do it that way you also need to un bolt the rear shock lower link arm so it swings out of the way. I have a 23 and that’s how I’ve been doing it. Hope this helps.
Footpeg Pins go in from the top IMO. If you ever shear the cotter pin off at least the pin won’t fall out during a ride since it’s not upside down. Especially on a race bike.
@@jritchiejritchie2687 you’re saying the cotter pin? I have a 22’ te300i and the dowel sticks out equal amount on either side. Either way, Gravity & hard movements will make the pin fall out wayyyy easier going in from the bottom if the cotter pin is sheared. But to each their own
@@yz25075 got you. I mean it would be a freak thing for the cotter pin to shear but I ride 30-40 miles from the truck. I run them from the top just incase.
Vlog tip requests: Minimum laptop specs? Windows or that Apples thing? Recommended editing SW? Just bought a GoPro and editing the footage on a 8GB Ram laptop is giving me the shits! Also great to see Stan back again!
I have a 2023 KTM 300sx coming. I told the dealer to go ahead and change the rear spring out for my weight.And that’s how I made it easier on me to change my rear spring out 😜.
Another tip for fitting grips if you dont have a airline with you. Fill the grip with petrol and flick it all out. Slide the grip on while its still damp inside and when the petrol evaporates it sticks like glue. Raced with them like it for years and never had trouble. It takes seconds. Just make sure its all clean
Well to be fair i only ended up here through Tommy's channel, i kept seeing your mug on there so i figured i'd have a look and i'm a sucker for bike builds so... i'll probably stick around tho 😂
Good to see you and have a chat at the ride day billy i really appreciate you taking the time to talk to me and the family, everyone really enjoyed it roll on the next one, edd's got a treat for you and the gang from me hope you enjoy 🍰🍪🍩🍨🎂🍦 ⚡⚡⚡⚡💪👌👊🔥🔥
Great video as usual. Hope to see you soon in action again! After seeing this we can conclude that Husqvarna is just ‘ready to ride’ if you want to race call Stan 😅
We need more Stan tech tips videos
show
Good to see Stan and Billy back in action with Ed sorting the editing out 👌
I’ll take that as a compliment for my editing lol
On taking off the rear shock. You had it pretty much right but you need to pull it out and put it in where the rear muffler goes but to do it that way you also need to un bolt the rear shock lower link arm so it swings out of the way. I have a 23 and that’s how I’ve been doing it. Hope this helps.
Looks awesome with those WP goodies 🚀
🥰🥰
Great to see ya all on the bikes again
Look forward to the next cheers billy bob !
Would love to see you and Mani take on some GNCC races some time!
Footpeg Pins go in from the top IMO. If you ever shear the cotter pin off at least the pin won’t fall out during a ride since it’s not upside down. Especially on a race bike.
Thanks
Trials and enduro go upwards to keep them from rock's etc
@@jritchiejritchie2687 you’re saying the cotter pin? I have a 22’ te300i and the dowel sticks out equal amount on either side. Either way, Gravity & hard movements will make the pin fall out wayyyy easier going in from the bottom if the cotter pin is sheared. But to each their own
Definitely from the bottom, from ktm
@@yz25075 got you. I mean it would be a freak thing for the cotter pin to shear but I ride 30-40 miles from the truck. I run them from the top just incase.
Awesome!!! we love the vlogs Bill, from Olivia and Luke and family!!!!
I love bike builds so much plz more or like Stan make a channel just for bike builds I would love that
Vlog tip requests:
Minimum laptop specs?
Windows or that Apples thing?
Recommended editing SW?
Just bought a GoPro and editing the footage on a 8GB Ram laptop is giving me the shits!
Also great to see Stan back again!
Nice job billy , great seeing you back out on a bike last few times, and now a nice new one to play on 😎 stay safe bud 👍🏼👍🏼
Class video man, something different 👌🏻
He’s so entertaining and funny . His personality out shines any rider of any discipline of motorcycle racing .
GWWWWOOOONNN another banger video and an appearance from Stan the man keep them coming Billy boiiii #banger #bikebuild #billyboiisback #stantheman
Dude had the coolest accent of all time! He should be in the movies. An action hero!
Nice to see “nearly 11k Lee” back in action 👏🏻🔥🏴💪🏻
Yeahhhh.... Billy is back in business !!! Awesome bro...👌🏼💯👍🏻😉
I have a 2023 KTM 300sx coming. I told the dealer to go ahead and change the rear spring out for my weight.And that’s how I made it easier on me to change my rear spring out 😜.
Great to see you riding again!!
Loved it and great to see Stan the man ! Any chance of listing your bike spec; Bars, shock changes etc ?? Appreciated and keep up the great blogs
82 k views In 2 and half weeks impressive . gutted the desnation vids didnt doo more .Great vids them billy
Dam… this is a dream workspace😍😍
I appreciated the tips and riding at the end. 💪😃👍
Hell yeah Stan is back and grouchy as ever
Saw you ride on Tommy's channel and was looking good. I hope you get the championship in 2023. Then I hope you go racing with Tommy in 2024..
Love you Billy i am a hardcore fan from Mizoram🤟🙂good luck on your new bike🙏
Another tip for fitting grips if you dont have a airline with you. Fill the grip with petrol and flick it all out. Slide the grip on while its still damp inside and when the petrol evaporates it sticks like glue. Raced with them like it for years and never had trouble. It takes seconds. Just make sure its all clean
Women's hair sprays works good as well
Well to be fair i only ended up here through Tommy's channel, i kept seeing your mug on there so i figured i'd have a look and i'm a sucker for bike builds so... i'll probably stick around tho 😂
Welcome to the club
Good to see you and have a chat at the ride day billy i really appreciate you taking the time to talk to me and the family, everyone really enjoyed it roll on the next one, edd's got a treat for you and the gang from me hope you enjoy 🍰🍪🍩🍨🎂🍦 ⚡⚡⚡⚡💪👌👊🔥🔥
That whip looks a mint thumper...on 🔥
Good to see you back in action 😊
⚡️BB57 ⚡️
Nice bike! Can’t wait to check you out on it!
🏍💨
Bang on as usual
Billy does Stans tongue always hang out when he's concentrating 😂😂
10k is back 😊 we’ve missed him as much as #57 ripping round. Got to drag him in to the next podcast, find out how his 3 month holiday went 👍
9:30 - Stan blasting haha
Great video as usual. Hope to see you soon in action again! After seeing this we can conclude that Husqvarna is just ‘ready to ride’ if you want to race call Stan 😅
Making the weekday sweet, thanks Bill
When fitting the rear shock will I need some major tongue action to get it on
Billy is back
Sick new bike BB57💨💨💨💨🤙🤙🤙🤙
Luar biasa... Gas poll Billy the best croser
Be old enough to do the vmxdn soon lol glad to have you back
Glad to see you and Stan back Bill 🤘
Time for the channel to blow up then eh?
Goooo on!
Didn't pay attention last video but the side burns👌
What protaper size or model of handlebars you use? Best regards from guadalajara mexico. 🔥🔥🔥🔥🔥
Billy what grips are you running I can’t ever seem to find 140mm ones
Then new husky’s are lookin 😮💨
Keep up the good work Bill
keep em coming!!!
Billy, what mousses are you using mate?
I saw pics of you at Ironworks giviner it 🚀👌
Bora voltar no 12 ✊✊✊✊✊ Paaaaaa
Nice Vid....For safety's sake wouldn't you put the foot peg pins in through the top?
Legend billy boyyyyy
What’s the benefit of a down and back peg
Put your peg pins in from the top, if the clip comes off the pin it doesn't just fall out that way ;-)
Naaa
@@BillyBolt57 I guess it's nice to live dangerously... And race bikes see a bit more maintenance than the average shmo's bike.
is breaking in the bike an option?
Awesome bud cheers 👍🏻
Billy what piece of music do you use for your intro?
Your just magic on a moto
Why don't you use lock on Grips?
Tells us more about the footpegs mate, 5 mm back and down enough for someone ur size really ?
The women are gonna be flocking to Stans insta after that tongue action 3:35.... hahaha gotta get to 11k Lee 😆
I'd be really interested to hear your thoughts on the new 23 chassis, I feel like my 23 is a lot stiffer than my 22.
You've come to the wrong place for informative content like that!
@@heyman8820 not asking for information just his opinion 🤙
Billy were you four stroking again ? Whaaaaaaa
Go on bill
About time 🎉🎉🎉🎉😂
Bill, what’s your brake setup?!
Need that pipe for my 250 here in SA🤦🏻♂️🇿🇦
Billy had a RUclips channel and I never knew about it!?!
Been here a while now
Good to see Stan the man 👍😎💩
Pls invest in a 360 camera for the onboard clips.
Bealtiful bike 👌
Sana all
What‘s that sound at 9:32 😂?
Can I have that fmf for the 250 don’t have a pipe for my bike yet
Loving the minge
Mantap bang billy
Why do they always put the pins upside down in the footpegs
Do you love winding poor Lee up? 😂
Billy working on a bike reminds me of Clarkson working on a car…..pass me the hammer 😂
Hey Gordie boy were you get the legionnaires style red bull hat from ,I've asked this three times now can you bloody answer 👍🍺🍺🍺🍺🍺
Can’t buy redbull stuff mate
Holey kawasaki billygoat, does that stand really cost 1155 euros?
Anyone know which footpegs he installed?
Raptor Titanium
Billy can you give us the French subtitles ?? 😍🤘
We want more go-pro vids
Naughty bike that
"cut the waffle"? ha, haven't heard that one.
Billy
Thanks for the information on the bike. Oh wait, there wasn't any.....
Soz
Haha you guys are pretty funny
Hello billy bolt
🥰🥰
We wunt more Stan on he funny
Stans concentration face 😂
🎉🎉🎉mint vlog
It’s been up 2 mins your comment a min ago you havnt even watched it yet 😂😂
Awesome bike!
9.32 who’s Arse was that 😂