Flip boards are my favorite mellow boards, I usually skate steep decks but if I get a wild hair I'll skate a flip. Oust bearings are also the best bearings other then swiss on the market imo.
Flip is a name brand in the sport of skateboarding, awesome build man. Their is no brand that's better than the other, people just like different brands
@@beepovews4392The turning and the two sets that I had broke easily. Now I skate Venture and Thunders and they both feel great in their own unique way. I put them through a lot of abuse too and they don't break.
How is the turning of those trucks? Is it similar to Thunder or way worse? I am looking for low trucks and I would like to buy Tensors because I used to ride them back in the early 2000's. I like the style of design and I like this company. But there are opinions that they do not turn at all even when you keep them as loose as possible. Is this true?
Is there some sort of unspoken link between all Flip Riders? This is how I built my black with red lettering Flip deck as well, and no one told me how to do it either; just knew I wanted those Red Tensor Trucks, Bonez Red Bearings and Spitfire Wheels for that Flip deck back in 2003. The one before in 2001 was totally different: Girl deck, Venture Trucks, Pig wheels and bones bearings.
Thanks man I think I'm going to get some! It's a toss up between them and spitfire formula fours I'm still debating but I like how the Falcons are slim. I figured theyd be better for nose and tail slides.
Clean bro. I have a question about your flip board, does your deck design peel easily because my flip board peels so easily, i can even peel some of the design with my fingers, just wanted to ask to see if they are all the same or its just mine.
Krux has an 8.0 axel, Ace 33s fit 8.0 I believe. You just have to look at the trucks size charts to see which hits what! And for wheels I ride an 8.125 deck and skate 52mm-53mm. This one is a preference though!
Hahah good question. It’s because the wheels looks a lot cleaner with just the while. Typically wheel graphics ware away very quickly and it leaves the wheel looking very weird so I just put the graphic inward to not have to look at it
They skated great for awhile but since they didn’t have nylon shields cleaning them was an absolute pain. If you can keep your bearings clean I define you recommend them but if you are skating a lot of street they will be hard to dissemble
I’m still on them and planning to make a review but they arnt my favorite. I’ve had one bearing blow out on me and the shields are tin so when you remove them they can’t be put back on because they warp. They are fast but even after cleaning them I feel them slowing down again
That griptape looks super sick. Clean setup bro
Sup Chris
Love your vids Chris! We're from the same state
Flip has one of the greatest shapes...
I agree. Flip boards flip very nicely🤔
We’re is the kickflip test
Hahaha I forgot! Next time;)
Sirius_YT 😬
Where*
God bless you for peeling that sticker off
Got so sleepy until you started scratching the grip with the thing
Dope shit homie, I always roll Flip Tom Penny’s, been wanting to try A Baker deck later tho
Thanks so much! I’m really enjoying the flip board! It has a really unique shape. And baker is a great brand. I’ve only had one but it skated great
@@iholiday4639 is the Tom Penny nose wide or tapered? Really want to try one
Flip decks are sick af, seriously landed so many crazy tricks on these like imagine going from a honda to a bmw , legit ass board company, goated.
Flip has the best shape
Just bought the purple flip skateboard at Tilly’s as a complete skateboard and your was in the selection to complete can’t wait
Flip skateboards are one of my second favourite brands and that setup was really cool love the trucks 👌👌🤙🤙
Thanks so much! I’m going to try to do a review of everything on this build
@@iholiday4639 that be cool be looking forward to it
Flip boards are my favorite mellow boards, I usually skate steep decks but if I get a wild hair I'll skate a flip. Oust bearings are also the best bearings other then swiss on the market imo.
What I find to help as well, take the trucks with the wheels on and roll it across the top of the paper that is put on top of the grip tape
That's the oldschool way my dude!
This would be a super light skateboard setup 👍
Flip is a name brand in the sport of skateboarding, awesome build man. Their is no brand that's better than the other, people just like different brands
Looks like something Geoff Rowley would do for a setup except the trucks lol sick dude
I just noticed that lol!
The Ace of Spades
Clean setup
Thanks so much
Clean board
Thanks!
Set-up is sick!! I got the same flip board mines blue
It skated great so far!
@@iholiday4639 Nice!
FLIP for life❤
Tensor trucks😩😭whyyy
IKR?!
whats bad with them?
@@beepovews4392The turning and the two sets that I had broke easily. Now I skate Venture and Thunders and they both feel great in their own unique way. I put them through a lot of abuse too and they don't break.
That graphic is so og
That grip is 🔥
So sick dude 💥
Thanks so much!
@@iholiday4639 enjoy to new setup🛹✌🏿
How is the turning of those trucks? Is it similar to Thunder or way worse? I am looking for low trucks and I would like to buy Tensors because I used to ride them back in the early 2000's. I like the style of design and I like this company. But there are opinions that they do not turn at all even when you keep them as loose as possible. Is this true?
Skate independent 149 trucks on your next boards, they are expensive but it's so woth it for me
Do you ride the Indy hollows?
I ride normal independent 139 stage 11 on a 8.0 board they cost about 70$
Is there some sort of unspoken link between all Flip Riders? This is how I built my black with red lettering Flip deck as well, and no one told me how to do it either; just knew I wanted those Red Tensor Trucks, Bonez Red Bearings and Spitfire Wheels for that Flip deck back in 2003. The one before in 2001 was totally different: Girl deck, Venture Trucks, Pig wheels and bones bearings.
cool stuff bro
😎
I saw the same grip tape at a skate shop and I was gonna get it but I got a different one but it still says motörhead
It’s really cool looking imo!
iHoliday yeah it is
how well do the oust bearings skate? Are they fast and durable? thinking about getting them.
They are good but they don’t have removable shields so cleaning them is extremely difficult
Is that the matt berger Falcons? I have had my eye on them recently are they good for sliding on ledges?
Very awesome wheels! I recommend them
Thanks man I think I'm going to get some! It's a toss up between them and spitfire formula fours I'm still debating but I like how the Falcons are slim. I figured theyd be better for nose and tail slides.
Clean bro. I have a question about your flip board, does your deck design peel easily because my flip board peels so easily, i can even peel some of the design with my fingers, just wanted to ask to see if they are all the same or its just mine.
My dream setup is black and white baker deck mob grip tape formula fours independent trucks and bones super reds
Do you feel as this board is on the heavy side??
I though you were into revive decks
I love revive
would look nicer if u would cut the griptape and let the logo be seen.
Am I right that 8.25 is like XXXL? I’m looking for a new deck :/
Nah I would say 8.25 is average. 8.5 is getting on the big side but it’s all opinion and preference
im 6ft with size 10 shoes, should i get a 8.5?
Edit: (UK) size 10 so roughly 11 in US i think
Hot
sick setup! also i got a question, what size trucks and wheels do you recommend for an 8.0 size deck?
Krux has an 8.0 axel, Ace 33s fit 8.0 I believe. You just have to look at the trucks size charts to see which hits what! And for wheels I ride an 8.125 deck and skate 52mm-53mm. This one is a preference though!
@@iholiday4639 thank you. appreciate it.
yo bro, how many colored ply is your flip deck?
🔥🔥🙌🏽
👍
Where did you order oust bearings
How dose it FLIP ...
Ok I’m new to skateboarding and I don’t know much about it so don’t judge me but why tf did u put the wheels on backwards?
Hahah good question. It’s because the wheels looks a lot cleaner with just the while. Typically wheel graphics ware away very quickly and it leaves the wheel looking very weird so I just put the graphic inward to not have to look at it
@@iholiday4639 ohhhh ok that makes sense thanks
Yup yup
Yee yee
what is the best approach at a sponsor ship(via: Asking or waiting for someone to ask)
If you're good the sponsors will come to you
@@cyan1518 alright thanks
How are the bearings?
They skated great for awhile but since they didn’t have nylon shields cleaning them was an absolute pain. If you can keep your bearings clean I define you recommend them but if you are skating a lot of street they will be hard to dissemble
@@iholiday4639 wow thanks for replying. hmm... I was looking for reviews on oust bearings but I couldnt find any. How do you clean these then?
I had the same flip graphic on a 7.75. A cop ended up backing up and rolled over my board, snapping it, when it shot out from underneath me :// ACAB
I am so sorry to hear that
why tensors
PROPER 12
That’s right
I have the same deck but the colours are the other way round
How do you like it?
@@iholiday4639 I only have the deck at the minute but my setup is on the way, I’d imagine it is smooth
Noo he covered the flip with grip tape I thought were gonna leave it exposed 😖😖
How good are oust bearings. I've wanted to try them but I could never find any videos or reviews on them
I’m still on them and planning to make a review but they arnt my favorite. I’ve had one bearing blow out on me and the shields are tin so when you remove them they can’t be put back on because they warp. They are fast but even after cleaning them I feel them slowing down again
How were the Oust bearings?
They were fine but they have metal shields so cleaning them is very difficult. My favorite are Andale Swiss
@@iholiday4639 thanks for the reply and recommendationa man!
Course!
this comment will never get pinned !