Ep 34 Put Off No Longer!! Make a Micro/Mini/Small Lathe (Compound & Tailstock Grads) "mr factotum"
HTML-код
- Опубликовано: 6 окт 2024
- Ep 34 Putting It Off No Longer!! Make a Micro/Mini/Small Lathe (Compound & Tailstock Graduation Marks)
#modelengineering #howtomake #lathe
This lathe was briefly started many many years ago by an unknown Engineer, passed through a few pairs of hands since with nothing else done to it, until i got hold of it, so i will continue with the small amount of work already done, to finish the lathe in to a Imperial Micro / Mini / Watchmakers Lathe with screw cutting capabilities & back geared, everything has got to be made from Scratch including the Back Gears, Clutch, Change wheels, Leadscrew, Tailsock, Spindle, Pulley's, Screwcutting Mechanism, Dials etc etc just to name a few. The casting is very elegant and well made item, with a good foundation to start from.
There were numerous manufactures of these small lathe in Great Britain many moon's ago, to many to name here, so do a search and take a look at the huge seclection of makers and differing shapes, sizes and capabilities.
Full Micro Lathe Build Playlist here
• Making a Micro Lathe
thanks for watching, a thumbs up and sub' greatly appreciated
Kev
This project is the pinnacle of precision Engineering Art Kev. Absolutely unique and original 👍👍👍👍👍🙂
Thanks very much, appreciate the feedback👍👍👍👍
atb
Kev
Great stuff. I very much like the idea of running a second, high speed, spindle on the same mill 👍
Thanks 👍 Matt
Yes comes in handy my 40 year old Bosch Router, they don't make them like that now. Not forgot your sticker, these are a few vids in front while i do some home and car maintenenace. not been in the workshop for a while now to hobby work.
ATB
Kev
This is like watching a first class model steam engine being built which the Poms are famous for.
Kit from down under
cheers Kit
thanks for watching👍👍👍👍👍
atb
Kev
Unsurpassed quality as usual Kev.
cheers Dean
👍👍👍👍👍👍👍👍
atb
Kev
Hello,
Nice Vlog,was again interesting thumbs up from me!👍
Greetings Seven🖖
Thanks for the visit Seven👍👍🚂🚂🚂
atb
Kev
That really is the icing on the cake. Very expertly done Kev. Amazing setups. Cheers Nobby
Thanks 👍Nobby
appreciated
see you next time
atb
Kev
Hello KEV
Nicely done... 👍👍👍👍
Have a good week-end.
Olivier.
Thanks, you too! Olivier
atb👍👍👍
Kev
Thumbs up 😊
Thanks for the visit LOYT
appreciate the feedback
regards
Kev
Good work. Good use of the engraver.
Thanks 👍 Ben
hope your doing okay, 👍👍👍
atb
Kev
This has been a fantastic series, I love it!
Thanks very much MV
appreciate the feedback and watching.👍👍👍👍😉
Naming ceremony next, i think
regards
Kev
Love this tool ........ you gotta admit it just looks so cool. Came out great, The new gams and tray look excellent too
Thanks 👍 very much
appreciated
atb
Kev
very very good job
cheers TPM
appreciated, thanks for the visit👍👍
atb
Kev
Another brilliant video Kev. Love the engraving idea. The No stamps look OEM .
Steve.
Thanks 👍Steve
Not forgot your chuck you sent me, and your new sticker, coming soon after lathe naming vid probably.
cheers
Kev
Great idea with side spindle...hummm 🤔🤔
Engraving looks great !
Thanks 👍 dean
yes works great👍
see you next time
regards
Kev
Nice work there Kev I liked the router mount and the stamping guide they both worked really well 😀
Thanks 👍 Julie
much of our type of work with limited equipment is on the hoof!!!!,
wish i had a engraving machine😄👍👍👍👍👍
atb
Kev
Always good work and thought-provoking. Thank you. Les
Thank you kindly Les
appreciated👍👍👍👍
atb
Kev
Nice work Kev......really close now mate - Cheers Jim
Thanks 👍Jim
appreciated
atb
Kev
Nice touches there Kev.
cheers Tom👍👍
atb
Kev
This has been a great series of videos on your micro lathe enjoyed every moment of it. You now have a truly unique and wonderful micro lathe looking forward to future videos of you making things on it. 👍
cheers John,
one more to come, then it's classed as finished except for mods and add ons
atb👍👍👍👍👍
Kev
Some great setups there Kev, I really like your stamping guide 👍👍👍 It must be pretty nearly ready to do some work now 👍 Cheers, Alan.
Thanks 👍 Alan
Yes not far off, wish i had more time to do everything else in my life!!!, loads of jobs around the home and car to do, might be winter before i can use it in anger, then it will be too bloody cold, can't win, but i'm not complaining
atb👍👍👍👍
Kev
Very nice project. Nice work
Thank you! Cheers! Rusty
not forgot your sticker by the way, i have a few videos already done while i do home and car maintenance, in our wonderful summertime
atb👍👍👍
Kev
@@MrFactotum Okay. No problem. My videos is made a couple of weeks ahead as well.
Thanks anyway.
Great video. Like me.
Thanks for watching!👍👍👍👍
regards
Kev
Gday Kev, I’ve been wondering how you were going to do this and the results are bloody fantastic, keen to see how you make the name plates now, great job mate, cheers
Thanks 👍 Matty
i was wondering how i was going to do it too🤣🤣🤣🤣🤣👍👍👍👍👍
cheers
atb
Kev
Hi kev, just thinking out loud here, could you put a Vernier scale on the top slide to line up with the base you've just engraved so that you can get accurate sub division of the 5° increments?
eyup olly
thanks for for your thoughts, maybe a future project, if really needed, got one or two things in mind for future, if and when time permits😄👍👍👍
thanks for feedback
atb
Kev
Hi Kev. Resourceful as ever. Well thought out and expertly accomplished. 👏👏👍😀
Umm, I wonder what name you will give the lathe 🤔
cheers Andrew👍👍
all will be revealed next time😉
atb
Kev
Are you going to call it, not Frankenstein, but Kevenstein? ;)
hey T
not quite, but a suitable name for what it is!!!!
thanks for watching
hope your little move is coming along okay👍👍👍👍
atb
Kev
I would like to make a guide for my stamp letters too, but the letters arent in the same posision on the shafts of the stamps. So, that doesn't work.
hi Michel👍👍👍👍
yes i have some like that, i use them for freehand work
It's a problem as i can't throw anything away😄
atb
Kev
👍👍👍👍😉😉😉😉👍👍👍👍
atb
Kev