Just ordered the Seat Jackers and used your discount code, they took it even though it was a few days late, and really enjoy watching and learning from your Tacoma Journey keep them up
Chloe, I watched your video last week and just installed my seat jackers to my 2019 Tacoma TRD Off-Road today. I’m 6’4 and was still a little concerned about head space but it was not an issue as you stated. First time sitting in my seat it was a completely different experience and I loved it. Thanks for bringing this epic mod to my attention.
OK, ordered front jackers for my '17 Tacoma on a tired Friday evening (3/5/21; discount code was used, thanks). 3/11/21 Seat Jackers received & installed; just need to get some driving time now to determine how much they'll help me from getting a sore back on longer trips. 3/16/21: I drove around town for maybe an hour and decided I needed the rear of the seat raised up, too. I bought two 1" zinc spacers (1/2"x5/8"x1") and two M10-1.25x50mm bolts and raised the rear. I already had some flat washers and used them under the bolt heads. Note, becareful to get the 1.25 threads as there were also 1.5 threads at the store. As I had a few more washers at home, I also bought two 40mm length bolts and used these to slightly raise the rear of the passenger seat, too (~2 or 3 washers under each rear side). Also note these Lowe's hardware store bolts use a 17mm socket head. If I'd have bought the rear seat jacker kit I'd have used that but for $8 for two bolts & spacers and already having some flat washers at home, I got instant gratification and saved some money. 3/17/21 Longer 4 hour drive from CA to NV. I did notice w/my 5'9" height it was easier for my head to hit/touch the headliner if I move my head to the left. Overall, if I'd not heard of the product, I'd probably be ok living with the stock seat set-up. I was also OK with 2 or 3 flat washers raising just the rear of the seat. I do like how the front seat jackers give me a better view through the windshield.
These seat jackers really helped me out, I found the stock seats on my 19 Tacoma was starting to flare up my old herniated disc injuries due to being 6’2 in the uncomfortable position.
@@chrisnunez111 it provides more lower thigh support depending on how you angle the seat. Not much in the sense of more leg room. Also there is the issue of lack of adjustment for the steering wheel. If you’re looking for more leg room, you’ll have to move up to a Tundra.
Just installed my front and rear jackers. I had issues with my back and legs but with this mod it feels awesome. Thank you for your video. This is why i got this .
You were not wrong at all. Just got back from a 1k-mile round trip and noticed my thighs in slight pain. Just installed mine and, WOW! Now I need to order a set for my passenger seat
My husband got me a set of Seat Jackers for Christmas. They were super simple to install and even just sitting in the driveway the seats are way more comfortable! Looking forward to a nice long drive in the Taco with them.
I just installed mine in my 2022 TRD OffRoad. Thanks for the tip on the breaker bar, I couldn’t budge the bolts til I used the bar. By the way, I’m a 70 yr old female and I do my own mods.
Finally got the rear seat items and wow, what a major difference it makes to lift 2 inches on both front and rear. Thank you Chloe, I appreciate the suggestions.
This mod is great. I just installed this mod tonight. Thanks for sharing this mod. It makes a great difference for driver and the passenger. My wife loves it too.
That's the 1st thing I thought of when I got my Tacoma this year. I thought to myself man these seats aren't that comfortable. Coming from a Honda Ridgeline were there so many ways to adjust the seat.
Have these installed and there is a very noticeable difference in comfort. Especially on long drives. They even included a piece of candy in my package. Lol. Love it!
Chloe, I ordered these a couple weeks ago after watching your review. They are fantastic! You should be getting credit! They should give you a new discount code!
Once again I followed your lead and was pleasantly surprised. I installed the seat jackers today and the feel in the driver seat is phenomenal. I also added the Molle panel that goes with them. Thinking of mounting a fire extinguisher there. Thanks for the review.
I really don’t know if this is a modification I need as my 2020 TRD pro has a 10 way adjustable power seat. I don’t know if it would offer me any benefit at all. However it might be a good idea to install on the passenger side it might make it a much more comfortable ride for them.
One of the few things Ive disliked about the Tacoma is the fact that the seat was never right, it should have had a power seat which would have fixed all the problems and that is the main reason I traded in my 2018 Tacoma for a 2021 Tacoma. I tried the spacer thing but still never really liked the seating position, glad you are happy with yours Chloe.. It was Jesse Rizzo that did an install of a spacer, it helped a bit but not enough...
A bit late to the game but the seat jackers were a great mod. I’m 6’3” and the downward angle of the seat would kill my lower back. Then after spinal surgery i needed a lift in the seat, got there almost 2 years ago for $75. Saved my back on long drives. But sold my completely modded 14 dcsb for a raptor. THAT was the best mod ever. Haha.
Never would have thought of adding this mod without watching your video. Looks like the TRD Pro (Red) are out of stock. Once available, I'll buy and install thanks to you. Keep up the great vids Chloe!
Thank you for the instructions, i just got done installing them, unfortunately, I was not aware immediately that the rear items are different to the front, but ended installing the drivers side and once the rear items arrive will install both the driver rear and the front passenger, I can certainly feel a big difference when i sit in the seat and makes a big difference.
Great video! What a useful mod! I struggled with this in my 2018 Tacoma. I traded for a 20' with heated and adjustable seats. Fortunately you can adjust the seat height but it's not enough. That and it raises the entire seat so head room is at a premium, and I'm only 5'8". I'm ordering a set of these ASAP.
It's been 2 years with the Seat Jackers, as recommended by Chloe. Today (3/16/23) I removed the Seat Jackers and moved them to the passenger seat. I'd also originally raised the rear ~1" using longer bolts and spacers and removed that hardware, replacing the original bolts. Why try going back? 1). At 5'9", I had to duck into or bend my head down even more to enter & exit my truck; 2) I always had my outward vision blocked due to the relatively blocked view through the windshield with my rearview mirror blocking much of what's visible, instead of looking under the rearview mirror, even though looking over the hood was a bit better w/Seat Jackers. Anyway, I'll be trying the stock seating once again and I'll determine if my back will get annoyed during longer drives. As my wife is typically my only passenger, I'll see if using only the front Seat Jackers will be ok for her without raising the rear mounts. (I don't believe I'd vacuumed the truck in 2 years either!:)
I bought these a couple a years ago when i saw them at the Tacomaholic's channel. I lived in Pasadena and my unit at the time drilled at SLO county, eventually it was backwards I lived in SLO County my unit was in Escondido. That drive was pretty exhausting plus me being average hight i couldn't really find a comfortable way to sit. Those seat jackers do make a difference. Edited for grammatical errors
You sold me Chloe! I ordered a set with that Molle front panel. I put a radio in my quicksand Tacoma the past couple days the Kenwood DMX 1037S it was a pain but it’s great.
That’s a great mod Chloe....thanks for the info. People don’t often realize how just that small adjustment makes a very noticeable difference in ride comfort...especially on longer drives. Looking forward to the next vid 🛻🔧👀😎
Great job on videos!! I would hope Toyota would listen to people like u!! I may go Ridgeline cause I'm an oldie and need to be comfortable as I drive on freeway much!! Well done!!
I gotta kinda snicker a little here..... We lift the front to change the angle, then we lift the rear to change it back, essentially just jacking up the seat.... hmmmm. It always amuses me anyway when people complain about the Taco being uncomfortable. I'm 6'10" and drove my 2019 TRD offroad 5200 miles in 17 days last July from Florida to Colorado and back. (3 days there - 3 days back.. 11 days running trails and camping). No problems. And I'm not a young guy. Jacking up the seat (back) to me would just kill headroom. I guess it's useful if you're vertically challenged. Haha.
I'm thinking some may want the whole seat lifted vs just the front for clearance and/or to get higher in the vehicle if they are shorter. That's what I'm thinking. I fit fine, but I'm sure shorter people have issues.
The best seat mod is to buy good quality foam I got like 6 inch foam at Walmart for 100 bucks. And some seat covers for like 25 bucks at Walmart. You just cut out a square of foam for the butt and a rectangle for the back and put the seat cover over it . Bang now you got a couch seat
so if you jack up the front AND then the back, wouldn't they cancel eachother out? honestly interested it just seems counter intuitive to jack both the front and back unless you're simply trying to get a taller perspective.
Honestly, the price is actually reasonable. Remember, not only is this designed and made in the US, but it is all done by CNC Machinist. Look im a CNC Machinist myself and i know the work they put into it. If they are doing it with a 3 axis mill, then its gonna take at least 5 setup operations, that doesn't include the tumble, anodizing and cmm quality checks. If the do it with a 5 axis machine with a special vice on the pallet, then may be able to do it in 3 or 2 operations. Either way, both are very expensive to run, even more when you have your machinist working for you.
I thought the price was high too but hey..... Made in the US free shipping to Hawaii (almost never happens) and if it will make me more comfortable, yay. I’m a short 64 year OLD woman who finally got the truck I wanted all my life but it truly is not all that comfortable. So to be more comfortable AND see over the hood... yes I ordered them. Although, don’t know if I’ll be able to do it myself. Chloe makes everything look so easy.
After reading a lot of the comments, some people had problems seeing past the visor, I’m guessing this is an issue for taller people? I’m 6’2 and don’t really have any issues in my seating. I’ve been all across the country and don’t seem to have a problem. I’m glad it’s worked for many though.
The Seat Jackers are super nice, well made, fits perfectly and actually do their job. Only down side is the price, A tad high. Will buy a second set for the passenger side in the future, may be wait and see if the have a sale or discount code.
Another great video Chloe 😀. You sure find some of coolest 😎 upgrades that I would have never thought 💭 of. I never knew anything like this was available at all. Thanks for posting another good and practical product. Cody must have been a little hyper 😜.
I agree. love my Taco but the thing I don’t like about it is the seating angle. It feels like the seats are making me slouch & after an hour or so of driving, my back starts to ache. So I have to put a cushion behind my back
I just bought my first 2021 Tacoma. After driving one as a rental car, I quickly realized, the seats were too low to the floor. I now have the SR5 with 10 way power seats.
I thought the power seats would solve this but when you raise the front the whole seat doesn’t raise just the pad so it doesn’t help with the angle. These look great
Excellent idea, maybe next a steering wheel spacer to use with stock wheel?? Wheel is entirely too close to the dash, i.e., far away from the driver in Tacoma's. Long drives = shoulder/back pain for sure. Seems like the right company for the job! Cheers :)
They don’t make it for my cheap cuv, so I’m going to try some steel washers from the hardware store and do the rear part. Or test it out and experiment if it helps me.
Do you recommend also adding rear jackers at the same time as the front? Seems like maybe only doing the front might cause the rear metal to bend when cranked down if only adding them to the front?
I hope that insurance companies don't try to use these as an excuse to try and not provide coverage in an accident injury claim. Those bastards want your money but when it comes to paying, they'll do everything under the sun to scheme out of coverage.
Unfortunately, the seat jackers made my seat way more uncomfortable. I just got back from a 9 hour road trip and it was hard on my back. I'll be removing them soon. Thank you for the recommendation though, hope they still help you out.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Bought them with your discount. 2 sets, front and back, you saved me $28. Thanks
Just ordered the Seat Jackers and used your discount code, they took it even though it was a few days late, and really enjoy watching and learning from your Tacoma Journey keep them up
Chloe, I watched your video last week and just installed my seat jackers to my 2019 Tacoma TRD Off-Road today. I’m 6’4 and was still a little concerned about head space but it was not an issue as you stated. First time sitting in my seat it was a completely different experience and I loved it. Thanks for bringing this epic mod to my attention.
OK, ordered front jackers for my '17 Tacoma on a tired Friday evening (3/5/21; discount code was used, thanks). 3/11/21 Seat Jackers received & installed; just need to get some driving time now to determine how much they'll help me from getting a sore back on longer trips.
3/16/21: I drove around town for maybe an hour and decided I needed the rear of the seat raised up, too. I bought two 1" zinc spacers (1/2"x5/8"x1") and two M10-1.25x50mm bolts and raised the rear. I already had some flat washers and used them under the bolt heads. Note, becareful to get the 1.25 threads as there were also 1.5 threads at the store. As I had a few more washers at home, I also bought two 40mm length bolts and used these to slightly raise the rear of the passenger seat, too (~2 or 3 washers under each rear side). Also note these Lowe's hardware store bolts use a 17mm socket head. If I'd have bought the rear seat jacker kit I'd have used that but for $8 for two bolts & spacers and already having some flat washers at home, I got instant gratification and saved some money.
3/17/21 Longer 4 hour drive from CA to NV. I did notice w/my 5'9" height it was easier for my head to hit/touch the headliner if I move my head to the left. Overall, if I'd not heard of the product, I'd probably be ok living with the stock seat set-up. I was also OK with 2 or 3 flat washers raising just the rear of the seat. I do like how the front seat jackers give me a better view through the windshield.
Wow!! I just put Desert Does It front and rear seat jackers in my 2017 6 MT TRD Off Road. These changed the seating position so much better!
Next is the ARB under seat compressor with Desert Does it mount
Thank you so much for suggesting the product, showing how to install, and providing the discount. A big game changer. Just installed now.
These seat jackers really helped me out, I found the stock seats on my 19 Tacoma was starting to flare up my old herniated disc injuries due to being 6’2 in the uncomfortable position.
Does it create more or less leg room?
@@chrisnunez111 it provides more lower thigh support depending on how you angle the seat. Not much in the sense of more leg room. Also there is the issue of lack of adjustment for the steering wheel. If you’re looking for more leg room, you’ll have to move up to a Tundra.
Just installed my front and rear jackers. I had issues with my back and legs but with this mod it feels awesome. Thank you for your video. This is why i got this .
I drove 8 hours straight in my Taco the seat jackets made a huge difference to the comfort of the seats!
You were not wrong at all. Just got back from a 1k-mile round trip and noticed my thighs in slight pain. Just installed mine and, WOW! Now I need to order a set for my passenger seat
Dam tightened bolts to torque specs, that’s legit👌🏽
She's no hack. Doing it right!
I however.....Vice-Grip that shit till it squeaks
Why, cus a girl? It’s not hard smh
Stew Nueman 🤦🏽♂️ ima keep it about the content. All respect to you Chloe
Awesome mod. Installed them today with the rear and the molle. Highly recommended.
My husband got me a set of Seat Jackers for Christmas. They were super simple to install and even just sitting in the driveway the seats are way more comfortable! Looking forward to a nice long drive in the Taco with them.
I just installed mine in my 2022 TRD OffRoad. Thanks for the tip on the breaker bar, I couldn’t budge the bolts til I used the bar. By the way, I’m a 70 yr old female and I do my own mods.
Just installed these in my 2018 Tacoma TRD Sport. What a difference!! So much more comfortable!!
Finally got the rear seat items and wow, what a major difference it makes to lift 2 inches on both front and rear. Thank you Chloe, I appreciate the suggestions.
I have the full front and rear set on the way. Im 6ft, from what ive read sounds like i should install the full set
This mod is great. I just installed this mod tonight. Thanks for sharing this mod. It makes a great difference for driver and the passenger. My wife loves it too.
Great product, thanks for recommendation. It made a huge difference in how comfortable my seats are now.
after just going on 8 hr road trip to So Cal ,
I decided to order these
thanks again
That's the 1st thing I thought of when I got my Tacoma this year. I thought to myself man these seats aren't that comfortable. Coming from a Honda Ridgeline were there so many ways to adjust the seat.
I got these but for my gx470, makes long drives so much more comfortable
Love your videos Chloe! From a fellow engineer, I appreciate your consistently logical and complete delivery
Have these installed and there is a very noticeable difference in comfort. Especially on long drives. They even included a piece of candy in my package. Lol. Love it!
LOL!! I didn't get any candy!! :( but overall it was easy to install and I could tell the difference!!
Put one on my drivers side, loved it then put one on passengers side. Love them. Thank you for your videos
followed your training on this install and it went very smooth , it is funny feeling but nice first time sitting in the seat but really like them
Chloe, I ordered these a couple weeks ago after watching your review. They are fantastic! You should be getting credit! They should give you a new discount code!
That was the very first mod to my 2019. Game changer!
Glad to see you’re using the blue Loctite, rather than the red. Sometimes people aren’t aware of the drastic differences.
Once again I followed your lead and was pleasantly surprised. I installed the seat jackers today and the feel in the driver seat is phenomenal. I also added the Molle panel that goes with them. Thinking of mounting a fire extinguisher there. Thanks for the review.
I really don’t know if this is a modification I need as my 2020 TRD pro has a 10 way adjustable power seat. I don’t know if it would offer me any benefit at all. However it might be a good idea to install on the passenger side it might make it a much more comfortable ride for them.
Got mine in today! going to try to install myself, wish me luck! I will be taking your video with me lol
Did that to my 06 Trd Sport a couple of years ago, using a metal conduit in front seat and a 1" nut for the back for less that $10
One of the few things Ive disliked about the Tacoma is the fact that the seat was never right, it should have had a power seat which would have fixed all the problems and that is the main reason I traded in my 2018 Tacoma for a 2021 Tacoma. I tried the spacer thing but still never really liked the seating position, glad you are happy with yours Chloe.. It was Jesse Rizzo that did an install of a spacer, it helped a bit but not enough...
This mod has been on my list for a while now. Ordered a pair this morning using the code. Thanks for saving me some $ on it, Chloe!
A bit late to the game but the seat jackers were a great mod. I’m 6’3” and the downward angle of the seat would kill my lower back. Then after spinal surgery i needed a lift in the seat, got there almost 2 years ago for $75. Saved my back on long drives. But sold my completely modded 14 dcsb for a raptor. THAT was the best mod ever. Haha.
Did you use both the front and back for your back?
Never would have thought of adding this mod without watching your video. Looks like the TRD Pro (Red) are out of stock. Once available, I'll buy and install thanks to you. Keep up the great vids Chloe!
I just installed the Desert Does It seat jackers on my 2012 FJ, soooo easy!!! Thank you!!
Thank you for the instructions, i just got done installing them, unfortunately, I was not aware immediately that the rear items are different to the front, but ended installing the drivers side and once the rear items arrive will install both the driver rear and the front passenger, I can certainly feel a big difference when i sit in the seat and makes a big difference.
Just got my TRD sport hell yeah I’m watching all your videos
Seems like a good product, but I wonder how they hold up in a crash test...?
That is my fear too.
This is my biggest hang up too. I don’t want my life insurance to deny a claim if I die in an accident
shes the always-smiling tacoma queen.
Perfect description. Protect our 👑
Great video! What a useful mod! I struggled with this in my 2018 Tacoma. I traded for a 20' with heated and adjustable seats. Fortunately you can adjust the seat height but it's not enough. That and it raises the entire seat so head room is at a premium, and I'm only 5'8". I'm ordering a set of these ASAP.
Just installed these. Only thing I hate about my taco is the seat position. Def worth the price
Just ordered the seat mods today Chloe! Thanks for the info..I have a 2021 sport 4x4 and it’s a must for guys 6’0” with long legs
Hope they make the truck more comfortable 🙌🏼😁
Just ordered front seat jackers and used the code! Thanks Chloe.
Just ordered a set with the mounting panel. Thanks for the discount code.
It's been 2 years with the Seat Jackers, as recommended by Chloe. Today (3/16/23) I removed the Seat Jackers and moved them to the passenger seat. I'd also originally raised the rear ~1" using longer bolts and spacers and removed that hardware, replacing the original bolts. Why try going back? 1). At 5'9", I had to duck into or bend my head down even more to enter & exit my truck; 2) I always had my outward vision blocked due to the relatively blocked view through the windshield with my rearview mirror blocking much of what's visible, instead of looking under the rearview mirror, even though looking over the hood was a bit better w/Seat Jackers. Anyway, I'll be trying the stock seating once again and I'll determine if my back will get annoyed during longer drives.
As my wife is typically my only passenger, I'll see if using only the front Seat Jackers will be ok for her without raising the rear mounts. (I don't believe I'd vacuumed the truck in 2 years either!:)
Nice just got these for my brother’s new Tacoma .. gonna install today . Great video kiddo!
Really helps short folks see over the hood when Off-Roading! I run spacers in my 4Runner, 83 Hilux and my 06 Rubi unlimited.
Great mod. Even if you have a newer Taco with adjustable seat bottom these are good to get space for mounting other items
Thanks, just put them in today, first drive, allot better
I love your enthusiasm for your truck ❤️
I bought these a couple a years ago when i saw them at the Tacomaholic's channel. I lived in Pasadena and my unit at the time drilled at SLO county, eventually it was backwards I lived in SLO County my unit was in Escondido. That drive was pretty exhausting plus me being average hight i couldn't really find a comfortable way to sit. Those seat jackers do make a difference.
Edited for grammatical errors
You sold me Chloe! I ordered a set with that Molle front panel. I put a radio in my quicksand Tacoma the past couple days the Kenwood DMX 1037S it was a pain but it’s great.
Very cool! I have my fire extinguisher mounted on mine 😁
That’s a great mod Chloe....thanks for the info. People don’t often realize how just that small adjustment makes a very noticeable difference in ride comfort...especially on longer drives. Looking forward to the next vid 🛻🔧👀😎
Waiting for my jackers in the mail. Thanks to watching this video. Thanks
Great vid as always. I’ve been looking at these for a while and you convinced me to get it done!
Can I take a guess? Chloe's Audio is getting an upgrade! Great video on the seat jackers!
That's the first thought I had too.
Neat! I bought a pair thanks to this video.
Just ordered some via your link because of this vid! I can’t wait!
The 21 taco has power seats. They can help you set it better than before.
Great job on videos!! I would hope Toyota would listen to people like u!! I may go Ridgeline cause I'm an oldie and need to be comfortable as I drive on freeway much!! Well done!!
Thanks for the code! I finally pulled the trigger on one set, I’ll likely get the other ones for the passenger side eventually.
Every time I watch one of your videos, I spend money.🤦🏽♀️ But this sounds exactly like what I need. Just placed my order.
Lol, my bad! But these are SO worth it! 😁
@@ChloeKuo so if you put both the front and back it doesn’t bring you back to the same position?
Love it. Twin Compressor coming next
Thanks for the video! Definitely purchasing this and using code 👍😁
Just ordered and discount code worked great!!!! Thanks Chloe!
Wow!!! Grate upgrade. Thanks Chloe!!! ❤️ will order ASAP!!!
I gotta kinda snicker a little here..... We lift the front to change the angle, then we lift the rear to change it back, essentially just jacking up the seat.... hmmmm.
It always amuses me anyway when people complain about the Taco being uncomfortable. I'm 6'10" and drove my 2019 TRD offroad 5200 miles in 17 days last July from Florida to Colorado and back. (3 days there - 3 days back.. 11 days running trails and camping). No problems. And I'm not a young guy.
Jacking up the seat (back) to me would just kill headroom. I guess it's useful if you're vertically challenged. Haha.
Im 5’4 and I’m good with it too
I'm thinking some may want the whole seat lifted vs just the front for clearance and/or to get higher in the vehicle if they are shorter. That's what I'm thinking. I fit fine, but I'm sure shorter people have issues.
yeah i'm 6'0 and i fit fine. no problems at all. floor is a little bit raised but i mean thats gonna be normal on any mid size
The best seat mod is to buy good quality foam I got like 6 inch foam at Walmart for 100 bucks. And some seat covers for like 25 bucks at Walmart. You just cut out a square of foam for the butt and a rectangle for the back and put the seat cover over it . Bang now you got a couch seat
so if you jack up the front AND then the back, wouldn't they cancel eachother out? honestly interested it just seems counter intuitive to jack both the front and back unless you're simply trying to get a taller perspective.
I like the idea of the seat jackers but damn that price tag
Honestly, the price is actually reasonable. Remember, not only is this designed and made in the US, but it is all done by CNC Machinist. Look im a CNC Machinist myself and i know the work they put into it. If they are doing it with a 3 axis mill, then its gonna take at least 5 setup operations, that doesn't include the tumble, anodizing and cmm quality checks. If the do it with a 5 axis machine with a special vice on the pallet, then may be able to do it in 3 or 2 operations. Either way, both are very expensive to run, even more when you have your machinist working for you.
@@westwing23 not saying it wasn't but it's out of my price range atm
I thought the price was high too but hey.....
Made in the US
free shipping to Hawaii (almost never happens)
and if it will make me more comfortable, yay. I’m a short 64 year OLD woman who finally got the truck I wanted all my life but it truly is not all that comfortable. So to be more comfortable AND see over the hood... yes I ordered them. Although, don’t know if I’ll be able to do it myself. Chloe makes everything look so easy.
@@ValKuulei can always see if there's a local Tacoma group I'm sure somebody would give you a hand
@@Loneone01 there actually is. Chloe has mentioned them. Thanks for reminding me. I’ll have to look them up.
I love your videos!!!! Just got a new 2021 Tacoma. I love my baby
what trim level did u get?
Congrats on the new truck and welcome to the Tacoma family!
@@jay.0621 I got a Trd off road edition with technology packaging
@@ChloeKuo thank you!!
Thanks for the mod & info ....Great presentation !! I will make some of these and try them out !!
Thanks for sharing. Ordering today. Great mod.
After reading a lot of the comments, some people had problems seeing past the visor, I’m guessing this is an issue for taller people? I’m 6’2 and don’t really have any issues in my seating. I’ve been all across the country and don’t seem to have a problem. I’m glad it’s worked for many though.
Subscribed!Greetings from Lake Elsinore CA 🤙🏼
The Seat Jackers are super nice, well made, fits perfectly and actually do their job. Only down side is the price, A tad high. Will buy a second set for the passenger side in the future, may be wait and see if the have a sale or discount code.
I have those and that’s best mod I did beside seat covers. Now I need fox :)
I put spacer's and grade 8 bolts in the back, it's so much better.
Awesome video! I've been looking at these for my 4runner. Maybe I'll try them out.
That’s the problem I had with my old Tacoma, I always felt like I was sitting on the floor. It wasn’t a very good seating position at all.
Another great video Chloe 😀. You sure find some of coolest 😎 upgrades that I would have never thought 💭 of. I never knew anything like this was available at all. Thanks for posting another good and practical product. Cody must have been a little hyper 😜.
Thank you😊 and yes, Cody was being wild!!
@@ChloeKuo Does it make much a difference if you install just the front seat jackers and not the rear? Is it necessary to install the rears?
I agree. love my Taco but the thing I don’t like about it is the seating angle. It feels like the seats are making me slouch & after an hour or so of driving, my back starts to ache. So I have to put a cushion behind my back
I just bought my first 2021 Tacoma. After driving one as a rental car, I quickly realized, the seats were too low to the floor. I now have the SR5 with 10 way power seats.
Mahalo Chloe! Another great video! 💯🤙🏼
Oh yay! So glad you got the mod I suggested, it’s soooo good right?
Thank you so much for the suggestion!! So good and I’m glad it’s helping other people out 😊
I thought the power seats would solve this but when you raise the front the whole seat doesn’t raise just the pad so it doesn’t help with the angle. These look great
Excellent idea, maybe next a steering wheel spacer to use with stock wheel?? Wheel is entirely too close to the dash, i.e., far away from the driver in Tacoma's. Long drives = shoulder/back pain for sure. Seems like the right company for the job!
Cheers :)
You're the best 👍I'm in the process of buying 2021 Tacoma TRD 4x4. I would love your one on one help with my new truck! Lol 😆
They don’t make it for my cheap cuv, so I’m going to try some steel washers from the hardware store and do the rear part. Or test it out and experiment if it helps me.
Great review. Thx fir saving me approx $30 Canadian.
Do you recommend also adding rear jackers at the same time as the front? Seems like maybe only doing the front might cause the rear metal to bend when cranked down if only adding them to the front?
I hope that insurance companies don't try to use these as an excuse to try and not provide coverage in an accident injury claim. Those bastards want your money but when it comes to paying, they'll do everything under the sun to scheme out of coverage.
Can you install both of the front and the rear at the same time?
Absolutely, they work together or independent of each other.
Unfortunately, the seat jackers made my seat way more uncomfortable. I just got back from a 9 hour road trip and it was hard on my back. I'll be removing them soon. Thank you for the recommendation though, hope they still help you out.
Ah, sorry to hear that 😕 but glad you tried them out! There are a lot of people interested in a set so I'm sure you can sell them quickly
Better for the back, I think I will have to have these. Thanks
Omg Chloe. I have same problem with my taco. Thank you so much for updating this mid.
Love my 2021 Tacoma I have the power seats . You can make it comfortable With the tilt
The Toyota engineer gods need to come out with a seatdrop to lower front passenger side from a gen 5 RAV4.