I've had my share of custom fails. Take each as a learning experience and carry on. Thanks for sharing. I'll keep this figure in mind for future projects myself.
ohh really?! cant wait to see them both made !!! plus this gave me inspo to try my best at making an invincible figure (not that good at customizing but hopefully i can figure out smthin)@@CraftyGecko
This is good. Im sure you see stuff you would go back and do over, but when I look on the customs stuff like reddit, this is a sold figure. you made that hair look effortless.
@@CraftyGecko I also do recommend the Vulcan body for Omni man I just think it’s more correct when it comes to body proportions but again that’s my opinion I’m sure whatever you chose will be great!
I think the kid omega figure can be used for a custom ps5 miles morales Spider-Man. Just swap the arm at the shoulders, swap the feet and swap the heads and just paint on the red spider logos and web lines and BOOM a more articulated ps5 miles morales Spider-Man.
Hi I have my kid omega and invincible head sculpt, now need to get paint. Also what brushes did you use to paint him? And any tips with the tape and how to get the logo correctly? Sorry if it seems a stupid question I’m just not an artsy person with my hands and it’s my first custom
Scalpel is a swan and morton no.3 with a 10a blade. The rotary tool is a wesco from amazon, I just used the bits that came with it. Not that it really matters, you can achieve the same results with any brand
Hey man I’m currently making my own custom inspired by yours, how do u get the milliput to get so smooth looking ? Mines is a bit rough and has a few jagged edges and or fingerprints, it’s also a pain because it keeps stick to my hands lol
The flesh paint is "kislev flesh"
That does sound right, thank you!
@@CraftyGeckoHAHAHAAA YOU WERE RIGHT
I FOUND IT AAAHAHAHAAAAA 😂😂
despite the primer i think it still looks great! you could even turn this fig into like a bloody and battle damaged version!
Thank you! I did think about doing that, but I would like to have a trio that are all clean
Whats wrong with the primer? You don't prime your figures :0?!!
I did prime it, that was the problem. I explain in the video that the primer just didn't work well. I tried a new brand and it was just low quality
Hands down the best custom I’ve seen in a while
Thank you!
Even with the paint issues, it's still a 100,000 times better than the official figure.
It's actually great tbh
I've had my share of custom fails. Take each as a learning experience and carry on. Thanks for sharing. I'll keep this figure in mind for future projects myself.
Every custom is definitely a learning opportunity
DAYUM! that face sculpt looks great!
Thank you! It was nice to break out the sculpting tools for once
I know this idea has been done to death but if you ever make an omni man, you should use a McFarlane superman figure, great custom as usual!
Oh nice suggestion, thank you!
@@CraftyGecko The only problem with that is marvel legends dont scale well with mcfarlane
Yeah ibwas concerned about that, I'll have a look into it, might be better with the zero body
Cool invincible figure makes me wish that a marvel legends invincible figure existed but that’s a dope custom man
Thanks! Nendoroid are making one so finger's crossed that means figma will have the license too
Dude, I would 100% buy this if I could, fire custom bro
Thanks! The paints started to fade more so I'll be revisiting it later
You should make a Rex splode custom
Season 1 or 2?
@@CraftyGeckoone?
@@CraftyGecko 2
This came out amazing dude great custom!
Thanks!
It looks fantastic! You always do amazing customs! I love it!
Thank you!
@@CraftyGecko No problem!
still really good despite the primer messing up! cant wait to see you tackle atom eve if you ever will !!
Thank you! I plan on her and omni man
ohh really?! cant wait to see them both made !!! plus this gave me inspo to try my best at making an invincible figure (not that good at customizing but hopefully i can figure out smthin)@@CraftyGecko
Oh nice, I wish you the best of luck with it!
Cool
Thanks
This is good. Im sure you see stuff you would go back and do over, but when I look on the customs stuff like reddit, this is a sold figure. you made that hair look effortless.
Thank you so much!
Great custom as always Gecko! Honestly the paint rub and the yellow paint isn’t too noticeable at all 👍🏻
Thank you!
You know it’s a good day when crafty uploads a new custom video❤( also I would love to see an Omni man based on just how this looks)
Thanks! I do plan on doing omni man and atom eve too
@@CraftyGecko that’s great to hear! I will definitely check it out when it comes out
@@CraftyGecko I also do recommend the Vulcan body for Omni man I just think it’s more correct when it comes to body proportions but again that’s my opinion I’m sure whatever you chose will be great!
Thanks! I'm looking at the zero body at the moment, the all white would work well as a base
I'm planning to do this using Professor X from Tri-Sentinnel Wave
Excellent I'm so impressed gonna try this custom my self 👌👏
Thank youa. It's a relatively simple one, highly recommend it
This looks really good. I haven’t been customizing long, but I need to find the liquid mask and a smaller rotary tool
Thanks! Theyre very helpful
Beautiful
Thanks!
You should try to make the blue version
Can it survive a train?
🌚
The paint work definitely wouldn't 😅
I think the kid omega figure can be used for a custom ps5 miles morales Spider-Man. Just swap the arm at the shoulders, swap the feet and swap the heads and just paint on the red spider logos and web lines and BOOM a more articulated ps5 miles morales Spider-Man.
It could be! I would have to match the texture of the original body though
@@CraftyGecko if I did this kitbash, I’d just leave the black as is, to me it would be hardly noticeable from far away. But that’s just me.
i've found this figure really cheap, I think I'll try making my own Invincible also.👍
Definitely worth a try!
Hi I have my kid omega and invincible head sculpt, now need to get paint. Also what brushes did you use to paint him? And any tips with the tape and how to get the logo correctly? Sorry if it seems a stupid question I’m just not an artsy person with my hands and it’s my first custom
I use just some cheap nail art brushes from amazon but warhammer shops will have some good detail brushes for it
What drimel did you use? What piece? And also what size is your exacto knife?
Scalpel is a swan and morton no.3 with a 10a blade. The rotary tool is a wesco from amazon, I just used the bits that came with it. Not that it really matters, you can achieve the same results with any brand
What's next? Omni Man using Vulcan?
Possibly, probably using zero
👊
🫡
May I ask which tool do you use to trim his jaw/chin? Drimel?
And would sandpaper for plastic model works?
@rigo3188 it's a rotary tool but sandpaper would work
Dude, could you possibly commission me one? Or sell one?
I'll be opening commissions again once I've cleared my schedule a bit
@@CraftyGecko no problem man. How much were you commissioning for before?
@@CraftyGeckodid you open up commissions?
LETS GOOO
It's about time I touched on invincible
what paint do you use (im jk)
Hahahaha... 🫥
Thats was a good one though, nicely done 😂
Paintit primer completely ruined a Warhammer mini I spent £20 on, absolute garbage
Awful brand, I think that's the first time I've left an amazon review, especially a negative one
Hey man I’m currently making my own custom inspired by yours, how do u get the milliput to get so smooth looking ? Mines is a bit rough and has a few jagged edges and or fingerprints, it’s also a pain because it keeps stick to my hands lol
Hey, water can work really well for smoothing
Question for you, did you airbrush the yellow and blue, or did you use a paint brush?
@@sarinthanelson8414 idk if ur asking me or the OP but I used paintbrush
It’s so amazing I love your work. Do you think your gonna make a Omni man
Thanks! Yeah I plan on doing a couple invincible customs
@@CraftyGecko awesome i think you can tell I’m a big fan of invincible
@@CraftyGecko also nice job at shaving the traps
Thanks