Thank you Thank you so much. I FARTED around with the seat switches for a half hour, tried to find a schematic in my manual, they don't give you one. I found your video and found out there were three more switches. The neutral safety switch was the culprit. Thank you again.
It would be very helpful to know how to by-pass each switch for Testing/Troubleshooting. Also be VERY helpful to "see" how to get to and replace each switch.
help my bx2380 seat switch is bad used jumper wire on switch by front of seat didnt work , i have to bounce hard on seat to get it to work , if my weight shifts on seat it stalls, by passed connection to seat switch and same , stalls , is there a fuse i can remove to fix it ?
I have a 2019 BX2380 with a bad seat switch. Kubota does not have a replacement switch available, but they (Messick's) will sell you a new seat for $1660.00. That's not a typo.
Janet definitely sounds like you have an issue with one of your saftey switches to your PTO control. I would advise calling your local dealer or a qualified technician to assess your issue. Thank you for watching my video!
I have a bx1800 and having trouble starting, it cranks over but doesn't fire I replaced feul injector and now am told it has no compression, would you have any idea what way I should go from here thanks for your reply
So are you sure of compression issue? Gonna say 300-400 psi each cylinder should be relatively close to each other with 30 psi... If you are not getting fuel different issue...
@@lewislifeoutdoors5189 No I'm not sure about compression I bought new injectors and the garage put them on and still nothing so then they tell me no compression which my tractor has very little hours so it doesn't make sense to me it cranks till the battery goes down but I feel like it's still not getting the fuel but I'm not good with diesel engine
@@carsonmatthews1687 well buddy,sounds like you got a slew of different issues. sounds like you need to find a different shop/dealership. Think that is about the best advice I can give you at this time...... Thank you for watching my videos!
Thank you Thank you so much. I FARTED around with the seat switches for a half hour, tried to find a schematic in my manual, they don't give you one. I found your video and found out there were three more switches. The neutral safety switch was the culprit. Thank you again.
Turtle and rabbit lmao
So technically minded this guy
It would be very helpful to know how to by-pass each switch for Testing/Troubleshooting.
Also be VERY helpful to "see" how to get to and replace each switch.
I will try next time I have saftey switch issues. Thanks
I needed to see the ones under the seat! 😢
help my bx2380 seat switch is bad used jumper wire on switch by front of seat didnt work , i have to bounce hard on seat to get it to work , if my weight shifts on seat it stalls, by passed connection to seat switch and same , stalls , is there a fuse i can remove to fix it ?
Sounds like could have a few different issue, maybe more than one bad switch!
@@lewislifeoutdoors5189 its the seat switch 2p connector in the seat i have to bypass
I have a 2019 BX2380 with a bad seat switch. Kubota does not have a replacement switch available, but they (Messick's) will sell you a new seat for $1660.00. That's not a typo.
kubota bx will not crank. will only crank and start when the mower deck is engaged. help!!!!!
Janet definitely sounds like you have an issue with one of your saftey switches to your PTO control. I would advise calling your local dealer or a qualified technician to assess your issue. Thank you for watching my video!
I have a bx1800 and having trouble starting, it cranks over but doesn't fire I replaced feul injector and now am told it has no compression, would you have any idea what way I should go from here thanks for your reply
It does fire but doesn't pick up it's fuel
So are you sure of compression issue? Gonna say 300-400 psi each cylinder should be relatively close to each other with 30 psi... If you are not getting fuel different issue...
@@lewislifeoutdoors5189 No I'm not sure about compression I bought new injectors and the garage put them on and still nothing so then they tell me no compression which my tractor has very little hours so it doesn't make sense to me it cranks till the battery goes down but I feel like it's still not getting the fuel but I'm not good with diesel engine
@@carsonmatthews1687 well buddy,sounds like you got a slew of different issues. sounds like you need to find a different shop/dealership. Think that is about the best advice I can give you at this time...... Thank you for watching my videos!
@@lewislifeoutdoors5189❤