Airstep with Nux Mighty Plug Pro - Part 1

Поделиться
HTML-код
  • Опубликовано: 24 янв 2025

Комментарии • 6

  • @onbedoeldekut1515
    @onbedoeldekut1515 9 месяцев назад

    Noice.
    I found it a little tedious when setting my Airstep up to connect with my Spark amp, this looks miles easer in comparison, this might be a much better use for the pedal, thanks!

  • @sebastianreuter3461
    @sebastianreuter3461 5 месяцев назад

    Hey, so you can program the airstep to change things with short press and with long press?
    So you have 10 possibilities with one pedal? Can you set this in the mightier amp also?

    • @Chriss-Gear
      @Chriss-Gear  5 месяцев назад

      Yes, as I demonstrate in the video. I believe you can do this in Mightier Amp but have not tried it.

  • @kritsharma2933
    @kritsharma2933 11 месяцев назад

    Hi, just wanted to know your opinion.
    Do you think that mighty plug pro is enough to be the only amplification device for a bedroom guitarist?
    Have you found a way to loop it?
    Did you encounter the buzzing issue?

    • @Chriss-Gear
      @Chriss-Gear  11 месяцев назад

      Thanks for the questions. I don't think it works well with external speakers because of latency reasons. If you only need a headphone amp it works great. I have done some basic recording using GarageBand.
      There is a built in looper in the app. I haven't tried an external pedal. I am not a big loop guy but will give it a try at some point. I have a Mighty Space amp coming. It includes a pedal to make looping easier. Although I could program this into the Airstep.
      No buzzing issue but squeal with some of the high gain tones. Especially if the are using the EQ. They are easy to fix though. Usually adjust the noise gate and EQ a bit. Not sure why that happens as you would think it would bother the person that made the tone.

    • @kritsharma2933
      @kritsharma2933 11 месяцев назад

      @@Chriss-Gear thanks a lot for your elaborate response.