Mag priming mod revisited
HTML-код
- Опубликовано: 1 окт 2024
- after a lot of people asked me for more details on the mag priming mod I have re visited it and described each step.
don't forget that if you really like my content you can always buy me a coffee:
www.buymeacoff...
hello i folowed this steps but my magprime is spinning reverse and not helping na gels up
Hey mate, not a tech head but can solder etc, is this diode close enough www.jaycar.com.au/1n4004-1a-400v-diode-pack-of-4/p/ZR1004?pos=5&queryId=a57e8b98e3598c58dd3294b84c384d47&sort=relevance
Or this www.jaycar.com.au/1n5819-schottky-diode-40v-1a-do41/p/ZR1020?gclid=Cj0KCQjwkZiFBhD9ARIsAGxFX8BY4_PRW236i_Z1PgGhLpisl-_1mLzg5H23r6yFxLpw1xqgKGkd418aAqWxEALw_wcB
Yes the first one.
There's so little content about these upgrades and custom mods, I'm grateful for whatever I can get. Thanks Captain!
Hey mate, love your work! keep up the awesome content!! Would you go about the same way with the wiring for a mag prime for the wells m401?
Hey mate having some issues with mine, it works fine then i shoot and it stays stuck on, pull blaster shell apart and no issues, put back together and issues, any ideas?
great explanation mate. anyone who cant get it after this should get help from someone who knows what theyre doing.
Thanks again for the re attack on this mod. I was one of the ones annoying you with questions about the wirings etc which you kindly explained to ke on the comments section. Appreciate your time and effort sharing your mods.
G'day mate, what rating is the diode?
what spec diode is it that you have used? :/ there are many different ones. 1 amp? 3amp? 6amp? I am trying to get this setup for my weekend game.
1A
@@lowguidoschopshop thank you. I got 3a just in case. I shall buy you a coffee. Thanks heaps mate🤗👍
Hey mate, where is a good place to buy gel blaster parts from, I'm considering building a custom Owens gun. What should I look for and what should I avoid.
Have you seen my PDR video, the gearbox I used in that would be perfect for owen gun. I got it from gelballmod.com but i cant see it on their site anymore. Shoot them an email or something.
What are characteristics of diode?
Will it mag prime on safe or is safe off for the entire blaster?
It will prime on safe. Safe is a mechanical lock out
done this to a nwell m4O1 and i checked it over 5 times and it still runs both motors unless on safe, the diode is the right way around (grey line towards motor) and between the motor and switch as i can't put it between the switch and mag terminal, it will work for now but if anyone has any ideas i would appreciate it.
without looking at your setup I cant really comment. but you have it wrong somewhere or else it would work. I'm gonna have to draw a diagram.
If you watch last nights live stream I go over this in detail
@low guido's chop shop, bit of a similar question. i have a vector with a busted mosfet (common problem with 11v batteries) im thinking about removing the select fire and mag prime features. my mag prime handle broke last night on my scar and i played all night with just pre firing my gun till its primed. which has lead me to think about wiring my vector the same way. If i remove the mag prime, can i not put a diode in the setup? eg, power to motor, motor to trigger switch, trigger switch to mag motor then back to battery? think that will work? i plan on replacing all wiring with 12 gauge automotive wiring. at some point ill add a 10am trigger switch as well. Just after your thoughts on it please?
Love your channel, would have joined the live stream last night but i was out blasting with the squad.
yeah you can just wire it like a JM M4 or SCAR gen8
@@lowguidoschopshop without the diode? Or does it need the diode reguardless of the mag prime switch?
@@SuperstarQ76 you need diode for mag prime. if you want to just omit the mag prime and dry fire a few to prime you can go without the diode.
Thanks buddy, hopefully get it firing again tonight
if you follow my live stream from last night I talk about how the wiring works
What type of diode do you use??
iirc he said it was a 40V 1A diode
Can I do it without diode?
no.
@@lowguidoschopshop Hey, I just started gelsoft. Can you do a priming video on the Ji qu gearbox 3.0 that are run on all the LDT HK products? I don't know the difference between priming a gearbox on Jin 9 to priming a gearbox on a LDT HK. The reason why I chose a LDT gearbox over all other gearboxes is cuz the LDT gearbox is the only gearbox on the market that can travel a full cycle(or so I'm told,correct me if I'm wrong). I am going for realistic details. And I'm planning to install the LDT gearbox 3.0 on my Kublai K2 m4, that is primed when charged by the charging handle, I have no experience with the welding or the circuitry yet. Plz advice. Thank you for your time, been following you for some time now. Plz help me. Thanx :)