Love the Norm Abram love this week. New Yankee Workshop is the reason I have the audacity to think of myself as a woodworker. Also the reason I tap my glasses and say “always wear these [tap tap] safety glasses,” whenever I’m about to do something dangerous. 😅
Dave I worked in a Manufacturing woodshop that had a shaper router table, that is what that helix bit would be used on, a shaper motor is a bit heavier to handle a bit that is about 3.5 to 4.5" tall and yes it scared the SH*T out of me when I had to use it(it once grabbed the peice and throw it across the room I went to the staff locker room to change my shorts)
It shall be known as 'Excalibit' and great will be its deeds. I'm imagining that you're walking through the hardware store and there, suddenly, in front of you is a large boulder with this bit is embedded in it. You hear an ethereal voice saying, 'Whosoever shall pull this bit from the stone shall be King'. And the rest is history.
Man... Even as a child I was fascinated by Norm Abram when the NYW was broadcast over here late at night. Same calm energy as Bob Ross, but with more dangerous equipment.
That is one intimidating bit! I can see why you have been trepidatious to use it. And yes… I like that you added that you remained focused, reassessed and continued every once in awhile. Sage advice! And that tiling app, great find! Really useful! Thank you
I have a spiral bit on my box planer and it's SOOOO!!!! much better than straight knives. Always enjoy your videos. I always learn a lot. Thank you. The tile pattern will make a great side grain cutting board.
A healthy respect for spinning with sharp blades is key for any woodworker who wants to keep all their digits. Thanks for reviewing that beast of a router blade. I think the table top looks good, but I’ve got to admit that I’m a sucker for the artsy bowl set.
It's a planer blade attached on one side. Definitely deserving of one of those terrifying heavy machinery warning stickers that shows a stick figure with a bloody stump for a hand and blood and fingers flying away from it. Also, if you haven't already thought up your next old/cheap to fine woodworking idea, I think a good one would be to turn one of those cheap plastic Eveready/Rayovac flashlights that never work consistently into a superfine wood flashlight. It's a small thing, but could turn out pretty cool, especially if you make it a part of a set of things like a fine furniture road emergency kit.
We use tungsten carbude inserts that look similar. Depending on how those are held in and indexed into the tool you could probably find different inserts to utilize for different types of grooves and designs for edge detail. Just a thought.
I'm reading the other comments and a lot of people seem to be intimidated by this bit. I have used a good few routers, as well as planer/jointers and thicknessers at home and at my Menz Shed. I currently have a Triton TRA001B in my router cabinet, and Bosch 1600E handheld, and love them both. But my favourite tool is a HAFCO 10" thicknesser/planer with spiral head. It is so much quieter than tools with HSS blades. It makes nicer chips that don't clog the extractor, but best of all, the finish is amazing. Noticeably better than the 16" thicknesser we have at my Menz Shed, and that also has a spiral head. It can be annoying swapping between thicknesser and jointer functions, which takes about ten minutes, but that can be reduced with planning. Spiral heads with carbide inserts is definitely the way to go IME, and judging by what I just paid for this bit, they are getting more affordable.
I agree completely. My small garage shop doesn’t have room for a big jointer, so all I’ve got is a nice router table. Thinking of picking up one of these bits to make quick work of edge jointing boards on my router table. Would probably be a lot less sketchy with fences, featherboards, and dust collection.
The “cutters” are carbide inserts…or cutters, kinda interchangeable…but basically the same as I use on CNCs for metalwork at the shop I work at. I’ve never used them on wood though. I would think they’d last a really long time. Love your videos. And thanks for always putting out great ones!
You're a much braver man than I am, David. I love the projects you demonstrated, but I would probably quit woodworking before handling those spinning blades of death. The jet engine sound alone is terrifying. 😂
I use this bit in my Bosch 1617 to joint boards (among other things) on my router table. It's works so well that I sold my jointer. The 60mm cutting height is great for 8/4 stock. I agree this puppy is scary at 18k rpm.
dude love trhis content but I gotta be real Norm and the New Yankee Workshop is absolutely legendary. I remember watching it as a kid and it was one of the reasons I got into wood working. Love the tribute area in the shop! Keep up the amazing content
No reason to not continue watching it. Russell Morash (the producer of NYW, and owner of the actual shop) has been uploading the videos to a channel on RUclips. One of my favorite things is when he uploads an episode, and then follows it up with a video from this year of him showing off the thing that Norm made and how well it has held up over the past 30 years. He recently did this with the gardeners workbench Norm made. The channel is called simply "The New Yankee Workshop".
I just KNEW that the thumbnail was a photoshopped jointer head. 1 minute in and I had to stop it and go get the hubby to see the beast! Remember, bravery is doing a thing despite the fear. The rewards were great. The bowls are amazing! Love your work.
I have a similar size Infinity bit and it scares the crap out of me also. I keep the fence as close to the bit as I can depending on the piece. I think it makes it safer and definitely helps with the dust collection.
Great video. Use the different bearings by flipping your piece over periodically so that you are always doing a “downhill” cut with the grain & there will be less grabbing/fear. That is the whole point of this bit.
I needed to get rid of a cat-door cut in my 95 year old kitchen door. I used my CNC to cut two templates and I bought a router bit with a 3 inch cutting face. You're right, the bits are intimidating, so I had my general contractor do the work and the patch is flawless.
I received mine today - i got it from spe tools .. customer service was really good and it didnt take much time to arrive ... It is not much different than template routing on a shaper - the shaper template bits look quite similar but even bigger 😂 ... What i think i will do is make custom push blocks with hand guards (incra have one made of plastic) and i will make something similar to the woodpeckers freehand guard which is plexi glass that extends beyond the bit .. that way if the bit catches and pulls the workpiece , the pushblock hits the plexi glass and cannot go anywhere near the bit
Your video is very entertaining. You definitely have guts to put that bit in a router, even an inverted one. Smart to check it often to make sure it remains tight. If you can ever upgrade to a shaper that has router bit collets it’s much safer. One observation on your tabletop. It looked like you were using pine and walnut together. The difference in the density of the woods will probably cause a problem as the wood expands and contracts. In the future try using ash with the walnut. It gives similar tones as pine and has about the same density as walnut. I’ve done several projects over the years using these woods together and they still look great. Don’t mean to be critical just a helpful hint.😁
Saw a bit like that one time at a briss. Moyle said it was his favorite, called it the pickle-duster. But what he had, that Dave didn't, is a fence with great extraction. Can you imagine what would be flying around had he not?
I am definitely going to grab one of these bits! I love the fact you can turn the cutters to basically get 4 fresh flush trim bits out of it, and it comes with extra ones as well. However, I think their packages are kind of silly, since the bit takes 12 cutters, and you can pick a package with either 10 or 24 extras. Umm, maybe 12 or 24 extras? Just sayin!
That bit is a beast!!! I think I will pass on it. I think I'm too terrified of it. LOL. I love my router. One of my favorite tools. But man... routers are also the scariest of tools to me. I still enjoyed watching it in action. Great content. I love the little bowls and the table top.
that bit is so scary that if I were using it, I would have worn an apron made out of steel in case one of those carbide cutters flew off and, well, hit me in an area that I would not want to be hit in. Thanks for posting this.
Does that bit negate the use of a compression bit? When you did the bowl pieces, you had grain going both directions on the same pass. No 'chunking' of the wood? No tearout?
Dude, this is exactly what I need for a big-assed table I'm building soon--the base will have large, thick curved legs, and this cutter just solved my problem--how to template route them. Thanks!
I'm wondering if it might be better to turn the part upside down and use the bottom bearing when cutting end grain at an angle, so the bit is lifting the grain. I have and love a Whiteside spiral bit with top and bottom bearing, but this bit looks to good to ignore, so I have just ordered one. I can't remember what I paid for the Whiteside bit, but I am sure it was more than I just paid for this one.
How would you say this bit compares to a standard flush trim bit, say a compression bit. I have been looking at picking up a high quality bit for guitars and this looks like it may do well for maple neck headstocks which can get tricky when the grain direction changes.
I have a Jessem router lift. I don't think I have that much range to get a big that long under the table. It's been so long since I installed it, do I need to adjust my router in the lift?Maybe I have it sitting too high?
@4:50 it's a good thing you have dust collection cuz it looks like it creates a lot of dust/chips. 😂. But seriously, I can think of so many uses for this 'bit'.
I'll stick with my Whiteside compression bit. It's not inexpensive, but if you do a lot of pattern routing, it is the way to go. With it, you don't have to worry about your grain direction.
I totally thought for a sec you chucked that honk'n bit into your handheld router to hollow out the bowl. I was like, "but he just said he wouldn't... what is he doing?!".
I can't wait to hit the play button. This will be interesting to see. Typical HSS bits are not meant to go the speeds routers go. Inserts* (what Machinist call them)
Also to add, as long as you torqued those screws down, you will be fine. Find out what they suggeste and get a handheld, breakaway screwdriver. (Whatever you want to call it.) Don't over torque or those screws will break, then flying inserts are scary.
Awesome video as always. Dave a question : why a banana 😂.? A banana in a woodworking shop, I don't know, why did you use a teipe measures? 😅😅😅 . Mate remember , you have to get rid of that Ikea thing, where you have your record player,. Greetings.
we have a lot of them in the industry, even some big ones... scary as f at my last work place, i preferred the old style router they had, it was build big and heavy, in an table, with an over head running wheel and protection, it made it quite a lot more comfortable to work on
I only have 1 arm/leg function, and the router is a tool I'm most comfortable using. They do everything. A table saw is my "no go" tool. I mean, look at how many 2 arm/leg people get hurt using them. (Sadly, no one naked a good left blade track saw, so ripping sheet goods is a nightmare using just my one right arm.)
"Say what you want!" I'd like to tell you I'm about 98% sure I was behind you in traffic the other day while listening to the Making It podcast and I really debated pulling up next to you woth the volume cranked way up 😂
Norm literally taught me woodworking, and I was sad when NYW ended. I hope he is doing well and enjoying his retirement. As for that bit, the size is scary, but I think that the same size bit of conventional size would be just as dangerous - perhaps more so since, because of the cost, you might be tempted to use it when it's no longer as sharp as it should be.
@@lifetoanother Yes, I'm happy that all those episodes are becoming available again - always wondered why they didn't sell them as a boxed set. And I enjoy the updates, even if Norm isn't there.
That bit is scary through the monitor. There are too many cutters that could potentially fly off. My lock miter Sr bit from Infinity Tools used to be the scariest I have seen, but this is WAY worse.
The length isn’t such a problem with this, and the diameter doesn’t look to be too bad. As long as the cutters are tightened properly and the collet is good annnd the rpms are in the right range it shouldn’t fly out and kill you. The big diameter cabinet door shaper bits that have a 3 inch diameter at too high of rpm are the ones that will stick in your face
that is a jointer mounted on its side without a table! No joke that is mean. If you put a fence behind it you would have a 2 1/2 in jointer. What size router are you using?
I bought one of those. Put it into the router table and turned it on. The sound was terrifying! I immediately turned it off, put it back into the tube it came in and put it away. Haven’t taken it out since.
That bit scares the shit out me although routers svare the shit out me aswell. And how much was the bit the website wont load enough to tell me price. Do u have templates available for the dishes they look great?? 👍🏴
Maybe consider using a slightly thicker template material and having a permanently attached handle on the template in order to at least feel a bit safer when using that bit. Just an idea.
I'm a full time fine furniture builder. The reason you are scared of this router bit is because you don't have the start pin on your table setup. You should never expect to safely shove an unsupported piece of wood into a spinning bit. Fence for straight cuts, start pin for free form. Hope this helps.
If you're not terrified the entire time you're routing or using a table saw, you're not paying enough attention
Love the Norm Abram love this week. New Yankee Workshop is the reason I have the audacity to think of myself as a woodworker.
Also the reason I tap my glasses and say “always wear these [tap tap] safety glasses,” whenever I’m about to do something dangerous. 😅
Dave I worked in a Manufacturing woodshop that had a shaper router table, that is what that helix bit would be used on, a shaper motor is a bit heavier to handle a bit that is about 3.5 to 4.5" tall and yes it scared the SH*T out of me when I had to use it(it once grabbed the peice and throw it across the room I went to the staff locker room to change my shorts)
It shall be known as 'Excalibit' and great will be its deeds. I'm imagining that you're walking through the hardware store and there, suddenly, in front of you is a large boulder with this bit is embedded in it. You hear an ethereal voice saying, 'Whosoever shall pull this bit from the stone shall be King'. And the rest is history.
Man... Even as a child I was fascinated by Norm Abram when the NYW was broadcast over here late at night. Same calm energy as Bob Ross, but with more dangerous equipment.
That is one intimidating bit! I can see why you have been trepidatious to use it. And yes… I like that you added that you remained focused, reassessed and continued every once in awhile. Sage advice!
And that tiling app, great find! Really useful! Thank you
I have a spiral bit on my box planer and it's SOOOO!!!! much better than straight knives. Always enjoy your videos. I always learn a lot. Thank you. The tile pattern will make a great side grain cutting board.
A healthy respect for spinning with sharp blades is key for any woodworker who wants to keep all their digits. Thanks for reviewing that beast of a router blade. I think the table top looks good, but I’ve got to admit that I’m a sucker for the artsy bowl set.
It's a planer blade attached on one side. Definitely deserving of one of those terrifying heavy machinery warning stickers that shows a stick figure with a bloody stump for a hand and blood and fingers flying away from it.
Also, if you haven't already thought up your next old/cheap to fine woodworking idea, I think a good one would be to turn one of those cheap plastic Eveready/Rayovac flashlights that never work consistently into a superfine wood flashlight. It's a small thing, but could turn out pretty cool, especially if you make it a part of a set of things like a fine furniture road emergency kit.
We use tungsten carbude inserts that look similar. Depending on how those are held in and indexed into the tool you could probably find different inserts to utilize for different types of grooves and designs for edge detail. Just a thought.
0:52 *in baseball announcer voice*
"Oooooh, that one was just outside..."
😂
I'm reading the other comments and a lot of people seem to be intimidated by this bit. I have used a good few routers, as well as planer/jointers and thicknessers at home and at my Menz Shed. I currently have a Triton TRA001B in my router cabinet, and Bosch 1600E handheld, and love them both. But my favourite tool is a HAFCO 10" thicknesser/planer with spiral head. It is so much quieter than tools with HSS blades. It makes nicer chips that don't clog the extractor, but best of all, the finish is amazing. Noticeably better than the 16" thicknesser we have at my Menz Shed, and that also has a spiral head. It can be annoying swapping between thicknesser and jointer functions, which takes about ten minutes, but that can be reduced with planning. Spiral heads with carbide inserts is definitely the way to go IME, and judging by what I just paid for this bit, they are getting more affordable.
I agree completely. My small garage shop doesn’t have room for a big jointer, so all I’ve got is a nice router table. Thinking of picking up one of these bits to make quick work of edge jointing boards on my router table. Would probably be a lot less sketchy with fences, featherboards, and dust collection.
Just fantastic filmmaking again. That slow pan from the TV blade guard scroll to the router bit had me smiling.
Hahaha! Great video! I especially like seeing Norm in the back, getting sawdust flung at him.
Comparing a router bit to a banana is the scary part!! 😅
I mean, in a smack down between that bit and the banana?! No contest. It’ll be a blood bath…or maybe a mush bath.
Looks like a jointer replacement shaft. Lol. Them bowls are cool
The “cutters” are carbide inserts…or cutters, kinda interchangeable…but basically the same as I use on CNCs for metalwork at the shop I work at. I’ve never used them on wood though. I would think they’d last a really long time.
Love your videos. And thanks for always putting out great ones!
I have a spiral cutterhead from that company in my Dewalt planer. It's awesome and about 1/2 the price of the Byrd head.
You crack me up every time I watch your videos, great editing, humour and informative content…love it
You're a much braver man than I am, David.
I love the projects you demonstrated, but I would probably quit woodworking before handling those spinning blades of death. The jet engine sound alone is terrifying. 😂
Thats some great dust collection at your router table 😂
That thing's a beast and less expensive than I had expected. Including the extra cutters is a nice touch.
I use this bit in my Bosch 1617 to joint boards (among other things) on my router table. It's works so well that I sold my jointer. The 60mm cutting height is great for 8/4 stock. I agree this puppy is scary at 18k rpm.
Damn! I can relate to your fear. That looks truly terrifying, but incredible useful when dealing with thick material. Thanks for the video!
They are carbide insets. We use them a lot in machining. They are a great option for planers too.
He showed this and talked about it just after the 4:00 minute mark if anyone isn't familiar.
Saw one of these bit in an arsenal for one of CNC mills during the engineering training programme. I knew how it works, now I have seen it in action.
This should be added to the Picciuto line of badass builds. The design and end product looks amazing.
Those bowls are so clean! Those would make great gifts.
Dave, that's wild! Thanks for the heads up on the bit, it looks amazing!
dude love trhis content but I gotta be real Norm and the New Yankee Workshop is absolutely legendary. I remember watching it as a kid and it was one of the reasons I got into wood working. Love the tribute area in the shop! Keep up the amazing content
No reason to not continue watching it. Russell Morash (the producer of NYW, and owner of the actual shop) has been uploading the videos to a channel on RUclips. One of my favorite things is when he uploads an episode, and then follows it up with a video from this year of him showing off the thing that Norm made and how well it has held up over the past 30 years. He recently did this with the gardeners workbench Norm made.
The channel is called simply "The New Yankee Workshop".
I just KNEW that the thumbnail was a photoshopped jointer head. 1 minute in and I had to stop it and go get the hubby to see the beast! Remember, bravery is doing a thing despite the fear. The rewards were great.
The bowls are amazing! Love your work.
Cool bit. Scary af though.
Even cooler project you made with it
Looks like the fancy cutter for a planer or jointer
That thing is terrifying just to look at from home, let alone in person with my hands anywhere near it. You're a brave man!
I have a similar size Infinity bit and it scares the crap out of me also. I keep the fence as close to the bit as I can depending on the piece. I think it makes it safer and definitely helps with the dust collection.
Great video. Use the different bearings by flipping your piece over periodically so that you are always doing a “downhill” cut with the grain & there will be less grabbing/fear. That is the whole point of this bit.
I needed to get rid of a cat-door cut in my 95 year old kitchen door. I used my CNC to cut two templates and I bought a router bit with a 3 inch cutting face. You're right, the bits are intimidating, so I had my general contractor do the work and the patch is flawless.
I received mine today - i got it from spe tools .. customer service was really good and it didnt take much time to arrive ... It is not much different than template routing on a shaper - the shaper template bits look quite similar but even bigger 😂 ... What i think i will do is make custom push blocks with hand guards (incra have one made of plastic) and i will make something similar to the woodpeckers freehand guard which is plexi glass that extends beyond the bit .. that way if the bit catches and pulls the workpiece , the pushblock hits the plexi glass and cannot go anywhere near the bit
Totally agree with your thoughts on the bit - I've always said my router is the scariest thing in my shop :)
Your video is very entertaining. You definitely have guts to put that bit in a router, even an inverted one. Smart to check it often to make sure it remains tight. If you can ever upgrade to a shaper that has router bit collets it’s much safer.
One observation on your tabletop. It looked like you were using pine and walnut together. The difference in the density of the woods will probably cause a problem as the wood expands and contracts. In the future try using ash with the walnut. It gives similar tones as pine and has about the same density as walnut. I’ve done several projects over the years using these woods together and they still look great. Don’t mean to be critical just a helpful hint.😁
Saw a bit like that one time at a briss. Moyle said it was his favorite, called it the pickle-duster. But what he had, that Dave didn't, is a fence with great extraction. Can you imagine what would be flying around had he not?
I am definitely going to grab one of these bits! I love the fact you can turn the cutters to basically get 4 fresh flush trim bits out of it, and it comes with extra ones as well. However, I think their packages are kind of silly, since the bit takes 12 cutters, and you can pick a package with either 10 or 24 extras. Umm, maybe 12 or 24 extras? Just sayin!
That bit is a beast!!! I think I will pass on it. I think I'm too terrified of it. LOL. I love my router. One of my favorite tools. But man... routers are also the scariest of tools to me. I still enjoyed watching it in action.
Great content. I love the little bowls and the table top.
that bit is so scary that if I were using it, I would have worn an apron made out of steel in case one of those carbide cutters flew off and, well, hit me in an area that I would not want to be hit in. Thanks for posting this.
Agreed! I'd also probably pull out the torque rench when I change the inserts.
Does that bit negate the use of a compression bit? When you did the bowl pieces, you had grain going both directions on the same pass. No 'chunking' of the wood? No tearout?
Dude, this is exactly what I need for a big-assed table I'm building soon--the base will have large, thick curved legs, and this cutter just solved my problem--how to template route them. Thanks!
Where is this bit available? Or name of it
I'm wondering if it might be better to turn the part upside down and use the bottom bearing when cutting end grain at an angle, so the bit is lifting the grain. I have and love a Whiteside spiral bit with top and bottom bearing, but this bit looks to good to ignore, so I have just ordered one. I can't remember what I paid for the Whiteside bit, but I am sure it was more than I just paid for this one.
I think it’s wise to be treat the router with a ton of respect like you do. I’ve had a few near-disasters with them (especially the little ones).
Always love your stuff, David.
How would you say this bit compares to a standard flush trim bit, say a compression bit. I have been looking at picking up a high quality bit for guitars and this looks like it may do well for maple neck headstocks which can get tricky when the grain direction changes.
Smart man to be afraid of that thing! It's basically a flesh eraser if used haphazardly.
Flesh Eraser would be a great name for a grindcore band
I have a Jessem router lift. I don't think I have that much range to get a big that long under the table. It's been so long since I installed it, do I need to adjust my router in the lift?Maybe I have it sitting too high?
A bit of great information on a great bit I wish I knew about this bit a bit earlier.😊
I’ve had my eye on one of these bits for a while. Thanks for the video!
@4:50 it's a good thing you have dust collection cuz it looks like it creates a lot of dust/chips. 😂. But seriously, I can think of so many uses for this 'bit'.
omg… I want… THAT BIT! I FLIPPIN’ LOVE IT!
I'll stick with my Whiteside compression bit. It's not inexpensive, but if you do a lot of pattern routing, it is the way to go. With it, you don't have to worry about your grain direction.
Don't have to worry about grain direction with this either.
I totally thought for a sec you chucked that honk'n bit into your handheld router to hollow out the bowl. I was like, "but he just said he wouldn't... what is he doing?!".
When is the bowl plan going to be available on your website? What a great design.
I can't wait to hit the play button. This will be interesting to see. Typical HSS bits are not meant to go the speeds routers go.
Inserts* (what Machinist call them)
Also to add, as long as you torqued those screws down, you will be fine. Find out what they suggeste and get a handheld, breakaway screwdriver. (Whatever you want to call it.) Don't over torque or those screws will break, then flying inserts are scary.
I'm 45 seconds in, just gotta ask. Is that your Bob Barker mic? Always great seeing your videos! Also, I really dig that you make your own music. 👍
I'm gonna say what I want! I totally agree, that's the finger deleter 5000 😂
Awesome video as always. Dave a question : why a banana 😂.? A banana in a woodworking shop, I don't know, why did you use a teipe measures? 😅😅😅 . Mate remember , you have to get rid of that Ikea thing, where you have your record player,. Greetings.
I love seeing Norm. I'd be more worried about someone who isn't scared of that bit.
Very cool ideas love both ideas thanks for sharing
I want to konw where you got the Norm holding the saw art. That is great. Thank you for your videos!
Ahh I found it, Jim Ether painted in commission from Dave!
Carbide inserts.
I use that one and a 4" x 4" in my shaper.
"If you don't have a _______ use a _______." Is my favorite one liner.
whole new meaning to "committed to the bit"
we have a lot of them in the industry, even some big ones... scary as f
at my last work place, i preferred the old style router they had, it was build big and heavy, in an table, with an over head running wheel and protection, it made it quite a lot more comfortable to work on
I am with you on that one David & would never use a router bit like that, ever/never! 👍👍
Absolutely terrifyingly awesome
"I don't know what I'm doin'" , my kinda woodworkin' !
Looks like a good tool for thicker stock. I would use it
Is that bit something like a flush cutting bit? But it does have a lot of height. What is the name of the bit? Could make cool cutting boards also.
I only have 1 arm/leg function, and the router is a tool I'm most comfortable using. They do everything.
A table saw is my "no go" tool. I mean, look at how many 2 arm/leg people get hurt using them. (Sadly, no one naked a good left blade track saw, so ripping sheet goods is a nightmare using just my one right arm.)
"Say what you want!"
I'd like to tell you I'm about 98% sure I was behind you in traffic the other day while listening to the Making It podcast and I really debated pulling up next to you woth the volume cranked way up 😂
😮
Saw the thumbnail and was terrified!
Norm literally taught me woodworking, and I was sad when NYW ended. I hope he is doing well and enjoying his retirement.
As for that bit, the size is scary, but I think that the same size bit of conventional size would be just as dangerous - perhaps more so since, because of the cost, you might be tempted to use it when it's no longer as sharp as it should be.
www.youtube.com/@newyankeeworkshop
They have a RUclips channel where they do some updates from the workshop.
@@lifetoanother Yes, I'm happy that all those episodes are becoming available again - always wondered why they didn't sell them as a boxed set. And I enjoy the updates, even if Norm isn't there.
That bit is scary through the monitor. There are too many cutters that could potentially fly off. My lock miter Sr bit from Infinity Tools used to be the scariest I have seen, but this is WAY worse.
The length isn’t such a problem with this, and the diameter doesn’t look to be too bad. As long as the cutters are tightened properly and the collet is good annnd the rpms are in the right range it shouldn’t fly out and kill you. The big diameter cabinet door shaper bits that have a 3 inch diameter at too high of rpm are the ones that will stick in your face
It's a really cool and really scary bit. The only downside I see is the bearing seems to damage the template so eventually it will get smaller.
The “damage” was just sharpie marker transferring from the templates.
I'd be terrified of that bit too, so you're not alone.
That is impressive! I suppose looking at the size of it,its 1/2 inch shank only?
Well how you call this router bit and where can I get it please tell me appreciated thanks I say hello from London and Colombia 👍👌
that is a jointer mounted on its side without a table! No joke that is mean. If you put a fence behind it you would have a 2 1/2 in jointer. What size router are you using?
They are carbide inserts. I wouldn’t want to get tangled up in that thing either but I’d like to have one .
I am actually buying one, and probably it in my shaper once I get my Hammer C3 31 Comfort cleaned up.
I bought one of those. Put it into the router table and turned it on. The sound was terrifying! I immediately turned it off, put it back into the tube it came in and put it away. Haven’t taken it out since.
That bit scares the shit out me although routers svare the shit out me aswell. And how much was the bit the website wont load enough to tell me price. Do u have templates available for the dishes they look great?? 👍🏴
Like the video & the scary bit! Would you dust collection not be better placed to the right of the bit, where the majority of the debris flies off?
Maybe consider using a slightly thicker template material and having a permanently attached handle on the template in order to at least feel a bit safer when using that bit. Just an idea.
Came here to say the same thing. Then he wouldn't have to stop as much
"Say what you will": I think that a healthy respect for unfamiliar tools is the mark of a careful craftsman!!
What size router is recommended for spinning that thing? V6 is optimal but 4 cylinder will do in a pinch 🫣
The straight sided pieces could be a perfect candidate to template on table saw and an L fence.
Fear just means you respect it. Gotta respect your tools to stay safe in the shop!
I'm a full time fine furniture builder. The reason you are scared of this router bit is because you don't have the start pin on your table setup. You should never expect to safely shove an unsupported piece of wood into a spinning bit. Fence for straight cuts, start pin for free form. Hope this helps.
This guy is fantastic!
Looks like it might be great for those who use their routers as edge jointers.
What was the app or software that you used for creating the pattern at the beginning of the video?