Bought mine last week installing this weekend. Thanks Ben for the install video. The kit is amazing quality and glad to support and american company. We need more stuff for the ridgeline
Omg this lift is amazing finally some ones is making video of Ridgeline and making aftermarket things for it I personally think that this truck is no noticed or like nobody pays attention beacuse everyone say oh it's a Honda it's suck or it looks ugly beacuse of how it looks but not it's a good looking truck and can be really cool looking lifted with some mud tires or off road tires I have been thinking of making my Ridgeline into a Baja truck like making it fast lifted making a skid plate a metal bumber and stuff this truck is amazing and I'm gonna let you in a secret of the Ridgeline I daily it and don't you think like it's bad on gass like it uses lots of gass I found out a solution how to make it save gass like it's simple anyone can do it so what I did was change the filter sure it saved gass a little bit more with a new air filter on the engine but to really get best gas mileage is to take off ur cateletic converter or cat and it's the rear one it's under the driver and passenger side you might know what I'm talking about so take it off then take everything off inside the cat so it's hallow this will increase horse power and gas mileage I put it back on after I took off everything inside the cat keep in mind I still have my stock exausht and once I put everything back together I start it up it was the same it didn't sound loud or anything same sound nice a quiet after that I reved the engine I went to the tip of the exausht and it felt more air like coming out like lot it didn't feel like it was clogged or anything it felt like it was blowing the fumes or co2 or what ever out nice and there was dirt on the floor when I reved the engine it had so much like air coming out of the exausht it blew it like nothing after that I used it about a week and my gass would usually won't last like a whole week after I did the mod I would put gas in Monday by Saturday I would be at empty after I did the cat thing I was getting so good gass milage thaty gas would last up for 2 week like it was crazy my gas last more know it last more than my Honda ep3 and it a 4 banger and it also increase horse power I can feel the truck when I barely push the gas like it will go fast I want some one to try this and tell me the amazing results it really work it fast and easy and will save you gass and money
Glad I found this vid. Had a 2" spacer kit on my 06 for years and took it off, because I got tired if the awful vibration under acceleration and it was prematurely destroying axles. Now seeing this gives me hope and I want to lift it back up. I'd love to see a long travel kit made for the Ridgeline. Also, with that 3" kit, now it will accommodate a 32" or 33".
@@goodplanetfilms I actually called the company and spoke to them about that issue. They said they believe it's actually a axle issue, but that subframe kit aligns the axles again which would alleviate vibration. On a side note, if you replace your struts, DO NOT USE aftermarket springs, keep the original springs.
@@DARODOLO thanks for the note! Yes a lot folks with 2" lift kits had problems with axles being worn out prematurely. I just wonder if this would fix that issue.
I’ll be doing this to my 08 Ridgeline once it’s out of the shop. They look great with those extra few inches in height. I’ve done some work on mine and this is my next step on my build
3:54 - I know this is super late but you mentioned clearance under the hood at this point in the video for tools... At 3:54, that rectangular hole on the top of the video is for your hood prop, raises it WAY higher and out of the way... I learned this after doing my front struts last year. Hope that helps somebody else in the future.
I have the sub frame drop kit on my rd1 and it fixed all my wobble issues! Sadly im getting a ridgeline in a trade so gonna get rid of the crv on 30s and obviously get this kit for the ridgeline. Great video brother way easier than the rd1 haha
Front and rear metal bumpers with a winch mount or space tucked up into the bumper. Something that won't kill the approach angle and has tow hooks or D ring shackle mounts on the face of the bumper.
Thank you for the video. I actually make my own kit out of aluminum and poluurethane for a little give. It was really easy and way less than 150 bucks. The fox guys are my neighbors been jawing at them for some trick struts. Was toying with replacing springs with air bags but not sold yet. Oh and I have gone four inches just to be different. I am a platnum tech for forty years and a race car motocross nut so I really understand suspension. I have some ideas. Already ported polished heads flowed every thing working on electric turbo supercharger and remap.
I have a 2012 Honda Ridgeline that's got a 4 inch lift and also put set of XD rims with 265/65R18 Handkook Dynapro AT/M's. Rims and tires fill fender wells perfect (no scrubbing). Moog lower control arms, KYB inner and outer tie-rods. About to change struts from KYB to something beefer.
I’d love to see a full replacement front trail bumper like from ARB and etc. I think with a 3” lift now these rides are more serious contenders. Before knowing there was a 3” lift I’ve never even considered buying a ridgeline.
The ridgeline is a truck and I’m happy there is a lift available. And yea I said truck , my ridgeline has almost 400,000 k and everything still works …. I’m going to lift it !!
I want this so bad.. Just bought my 06 Ridgeline RT and although I like it its kinda boring looking as it's all stock. With this kit, some new rims and tires I will love it...
I love this option. I was looking underneath and knowing it's a unibody I hesitate doing anything but I was watch Baja racing videos and saw that the longer A Arms, axles, trailers,and Struts could have a longer suspension and larger tires but I doubt the unibody would hold up to the extended abilities that would have to be tried😅😂
Great vid. Thanks. I'll be handing off my '13 RTL to my son soon enough, and am looking to tweak it a little so he's not driving his dad's car. I'd be interested in any of those modifications you spoke of. Thanks again.
Love to see some underside skid plate, rock sliders, tube bumpers. I’d love to see some custom struts. Too bad no big name companies like Bilstein or Rancho don’t make struts for the Ridgeline. I loved the video. Probably going to be buying your kits sometime in the near future
Looking for a 2007 - 2014 Honda RidgeLine Texas Edition with 3-4 Inch Lift Kit of Course + A Dully Back Set of Wheels. Can it be done? Texas Size Edition!!!
Hey love the 3" lift kit I wish I saw this lift kit before I installed my 2" lift. That might be a future mod I'd be looking into. Would you be making a high clearance rock slider kit? Something like Jake Allen's friend, from Facebook, has built him? Also a high clearance bumper kit like the SSO slimline hybrid stage 2 kits they have for tacomas. If that's even a possiblility with these frames. Something to improve the approach and departure with a light armor.
sorry I got confused at the beginning of the video. So I only care about ground clearance, but I don’t care about how things look. And preferably a little bit bigger tires. is the subframe lift what I want? being closer to factory geometry is important to me. I want it to be reliable.
When you flip the rear strut assemblies around so they are backwards, instead of swapping them left and right, the plastic feature at the bottom of the perch area ends up facing the wrong way (end of the coil). Inboard is outboard and vice versa. That's why there's a left and a right for the rear. It's probably better to swap left and right so that inboard stays inboard and outboard stays outboard. Also why not have studs on the top of the front spacers? Regarding other products, how about a steering wheel spacer, to bring it further back?
Wife and I bought a 04 CRV Ex last Tuesday and by Thursday I ordered your 2 inch lift kit w camber adjustment and I got it today in bc canada.This weekend ,guess I'am lifting a CRV .Your how too Videos make things so much easier thank you for your content #hondarescuegarage
I put a 2" front and rear lift on a 2012 Honda Ridegeline, and had the vehicle aligned. The vehicle immediately developed a shudder that starts at around 17mph and ends at about 20mph (the shudder seems to be happening only in the front of the car). The mechanic who did the work told me that he is concerned that the front axels might be stressed and that driving the car might cause damage to the axles and other expensive parts of the vehicle. Do you have any idea on what I might to do solve this problem?
I’m late to the conversation. My question is: how does the lift and larger tire and wheels affect the vehicles performance ? Or did you add performance to the vehicle.
Would love yhe same things to make this ablebtoo crawl with a JEEP WJ. Bo5h come unibody. Both jave 8.2/8.3 in ground clearance. Same soze wheels and tires. Then it ends. Would love a TC swap yhat wouldbgive Ridgeline owners 2wd, 4 hi part time. 4 full yime. And 4 low, beefier axles. Real lockers. Sliders,skid plates, LED bars,Winch BULL bar, and a good 2 inc suspension lift, and a 4 in and 6 inch long arm suspension lift so people can run 33's to 35's and gain more true ground clearance than 8.2 inches. Fender flares would be needed for larger tires after body trimming i suspect so fender flares on the list as well..
sorry, one more question how is this different from the 2 inch lift kits on Amazon? I’m assuming the Amazon ones are much farther from the factory geometry? Do those still increase ground clearance?
Is the install similar to a Gen 2 Honda Pilot minus the rear shock? I ordered the 3" Ultimate lift. I rather save $$$ and DIY and add new power tools to my tool box.
Thsnks for this video. I have a Ridgline 2014 standard, and i would like to lift it but only a litle to have little more agresive shape...but i dont want a monstertruck or a full offroad beast. Only a eastethic literalmente higer. You can recommend some lifting kit as that? Thanks again for you grear videos.
You absolutely cannot install a 3 inch kit without the subframe kit. all our 3 inch kits or any kit that comes with a subframe kit you have to install the subframe kit FIRST. you will not be able to install the lift components without doing the subframe kit first. If you did install the lift components without the subframe kit. the suspension geometry and CV axle angles would be un driveable.
Enjoy your video thank you im from NYC. I have 09 honda crv ex awd been trying to look for lift making little clearance off the floor any suggestions I wanted to put little bigger tires make like off road look can you help me what should I get how hi can I go on on the lift please thank u been for 2 years now
This is a helpful video; HOWEVER this video leaves out some of the most difficult steps. For example, on the front wheels, this video completely skipped the hardest and most important step of this entire process - reinstalling the strut after putting on the spacer - definitely requires 2 people, and getting it aligned with the two big bolts on the wheel hub offers a lot of chance for f-ups. You can easily pull out your inner CV joint tripod and tear the inner CV boot if you aren't careful. Like I said, helpful video but do some additional research before trying this if you aren't experienced.
I have 3 inch lift and spacer kit and confirm to you you still get more more ground clearance from the height of just having bigger tires.. what I'm saying is you have more ground clearance than stock id say 2" s more
Hello I was recently hir in my ridge line witch basically ripped off my rear bumper is there any kind of tube bumper or something I can replace it with that will still look good without the bumper cover on
I have a 2006 honda ridgeline rtl and I noticed they dont make a light bar mount for the ridgeline I had mines custom make if u like to see it I can send pics I'm also interested in the 3in lift and I dont confident enough to do it my self I'm will to by the whole kit and drive there to have u install it and u can even film it please let me know thx Chris
Omg... I want a 3 inch lift kit for my ridgeline.... finally someone makes a perfect kit
JOHN VELA ever thought of a Honda RidgeLine Texas Edition with a 3 - 4inch lift kit + A Dully Back Wheel Base?
Where can i find lift kit for mines
Light bar brackets and skidplates sound good! This 3 inch lift kit is awesome!
I install a 2.5 lift kit with the subframe spacer kit and it works. Thank you guys at hrgengineering great product and great customer service.
2006 ridgeline
Literally was borrowing my Gramps Ridgeline while my car is in the shop and just looked this up. Super badass man
Bought mine last week installing this weekend. Thanks Ben for the install video. The kit is amazing quality and glad to support and american company. We need more stuff for the ridgeline
Austin, how did it go? Are you happy with it?
Omg this lift is amazing finally some ones is making video of Ridgeline and making aftermarket things for it I personally think that this truck is no noticed or like nobody pays attention beacuse everyone say oh it's a Honda it's suck or it looks ugly beacuse of how it looks but not it's a good looking truck and can be really cool looking lifted with some mud tires or off road tires I have been thinking of making my Ridgeline into a Baja truck like making it fast lifted making a skid plate a metal bumber and stuff this truck is amazing and I'm gonna let you in a secret of the Ridgeline I daily it and don't you think like it's bad on gass like it uses lots of gass I found out a solution how to make it save gass like it's simple anyone can do it so what I did was change the filter sure it saved gass a little bit more with a new air filter on the engine but to really get best gas mileage is to take off ur cateletic converter or cat and it's the rear one it's under the driver and passenger side you might know what I'm talking about so take it off then take everything off inside the cat so it's hallow this will increase horse power and gas mileage I put it back on after I took off everything inside the cat keep in mind I still have my stock exausht and once I put everything back together I start it up it was the same it didn't sound loud or anything same sound nice a quiet after that I reved the engine I went to the tip of the exausht and it felt more air like coming out like lot it didn't feel like it was clogged or anything it felt like it was blowing the fumes or co2 or what ever out nice and there was dirt on the floor when I reved the engine it had so much like air coming out of the exausht it blew it like nothing after that I used it about a week and my gass would usually won't last like a whole week after I did the mod I would put gas in Monday by Saturday I would be at empty after I did the cat thing I was getting so good gass milage thaty gas would last up for 2 week like it was crazy my gas last more know it last more than my Honda ep3 and it a 4 banger and it also increase horse power I can feel the truck when I barely push the gas like it will go fast I want some one to try this and tell me the amazing results it really work it fast and easy and will save you gass and money
The Last Cyclicfiend8 ever thought of a Honda RidgeLine Texas Edition with a 3 - 4inch lift kit + A Dully Back Wheel Base?
Did this make an engine light come on? Also did it pass The admission test on the inspection! Sound like a great idea but I want to make sure
What a awesome, humble, smart guy with THE PERFECT lift for THA RIDGE 👌
You the man brother
Thank you for such a detailed video!!!!!!!!!!!
Glad I found this vid. Had a 2" spacer kit on my 06 for years and took it off, because I got tired if the awful vibration under acceleration and it was prematurely destroying axles. Now seeing this gives me hope and I want to lift it back up. I'd love to see a long travel kit made for the Ridgeline. Also, with that 3" kit, now it will accommodate a 32" or 33".
Any idea what caused the vibration? I get that occasionally with my 2" lift
@@eggonatowel868 The increased CV joint angle, but you only feel it under load.
@@DARODOLO do you think this lift kit would solve the vibration problem?
@@goodplanetfilms I actually called the company and spoke to them about that issue. They said they believe it's actually a axle issue, but that subframe kit aligns the axles again which would alleviate vibration. On a side note, if you replace your struts, DO NOT USE aftermarket springs, keep the original springs.
@@DARODOLO thanks for the note! Yes a lot folks with 2" lift kits had problems with axles being worn out prematurely. I just wonder if this would fix that issue.
I’ll be doing this to my 08 Ridgeline once it’s out of the shop. They look great with those extra few inches in height. I’ve done some work on mine and this is my next step on my build
3:54 - I know this is super late but you mentioned clearance under the hood at this point in the video for tools... At 3:54, that rectangular hole on the top of the video is for your hood prop, raises it WAY higher and out of the way... I learned this after doing my front struts last year. Hope that helps somebody else in the future.
If you could make fender flares that would be awesome!
I have the sub frame drop kit on my rd1 and it fixed all my wobble issues!
Sadly im getting a ridgeline in a trade so gonna get rid of the crv on 30s and obviously get this kit for the ridgeline.
Great video brother way easier than the rd1 haha
You should make fender flares for the Ridgeline
Front and rear metal bumpers with a winch mount or space tucked up into the bumper. Something that won't kill the approach angle and has tow hooks or D ring shackle mounts on the face of the bumper.
Thank you for the video. I actually make my own kit out of aluminum and poluurethane for a little give. It was really easy and way less than 150 bucks. The fox guys are my neighbors been jawing at them for some trick struts. Was toying with replacing springs with air bags but not sold yet. Oh and I have gone four inches just to be different. I am a platnum tech for forty years and a race car motocross nut so I really understand suspension. I have some ideas. Already ported polished heads flowed every thing working on electric turbo supercharger and remap.
I'd pay for a set .
I have a 2012 Honda Ridgeline that's got a 4 inch lift and also put set of XD rims with 265/65R18 Handkook Dynapro AT/M's. Rims and tires fill fender wells perfect (no scrubbing). Moog lower control arms, KYB inner and outer tie-rods. About to change struts from KYB to something beefer.
This is super easy, barely an inconvenience 😆
I’d love to see a full replacement front trail bumper like from ARB and etc. I think with a 3” lift now these rides are more serious contenders. Before knowing there was a 3” lift I’ve never even considered buying a ridgeline.
The ridgeline is a truck and I’m happy there is a lift available. And yea I said truck , my ridgeline has almost 400,000 k and everything still works …. I’m going to lift it !!
I want this so bad.. Just bought my 06 Ridgeline RT and although I like it its kinda boring looking as it's all stock. With this kit, some new rims and tires I will love it...
Great video outstanding information got a 2012 Honda Ridgeline Overland and I've been working on that lift it would look awesome
I love this option. I was looking underneath and knowing it's a unibody I hesitate doing anything but I was watch Baja racing videos and saw that the longer A Arms, axles, trailers,and Struts could have a longer suspension and larger tires but I doubt the unibody would hold up to the extended abilities that would have to be tried😅😂
If you guys could go down the rabbit hole of sourcing extended travel CV axels that would be amazing!! Or any skid plates
Thanks for the video, buying one .
We need a good roof rack we can add a cargo carrier to with lights
Into the products you making. Not ready for a lift kit yet, but light bar brackets and more has my interest!
Awesome video! You guys already know what Ridgeline upgrades I’m waiting to see😂🙌🏼🍻
Front bumper delete?? Light bar brackets…
Really hoping for a 2nd Gen Honda Pilot. I think the Ridgeline and Pilot would be pretty similar.
We just need to get our hands on them to R&D some kits.
Bed rack with side Molly mounts would be awesome
Great vid. Thanks. I'll be handing off my '13 RTL to my son soon enough, and am looking to tweak it a little so he's not driving his dad's car. I'd be interested in any of those modifications you spoke of. Thanks again.
Love to see some underside skid plate, rock sliders, tube bumpers. I’d love to see some custom struts. Too bad no big name companies like Bilstein or Rancho don’t make struts for the Ridgeline. I loved the video. Probably going to be buying your kits sometime in the near future
Stay tuned! We like where your heads at.
I think you'll have a good customer base for 3rd gen CR-V skid plates and bull bars!
A stainless steel lift kit would be nice. I got a Truxx lift kit on mine, the flanges are rusting like a flaky pastry.
Just ordered the lift for my old 2012 Ridgeline.
HRG Skid plates, bull bars, sliders or a gen 1 would be awesome
Don't stop my brother excellent continue thank you
The 3 inch kit is on my lists you rock!!!
Dang it against the one on risen truck stop they’re ready for for one
So, just curious on if your axle shafts held up with the lift or not
The rear looks lower than the front now. I think the price for the kit is a bit high in price for just some spacers and bolts.
I’d like to see lift kits for 2nd gen Pilots!
Awesome! Excited.
Always wanted a larger fuel tank for those longer drives.
A Twin Turbocharged motor like the HR35TT.
Supercharger complete Installation.
Any Engine Performance Installation Video’s
Great video ! Saving me alot of time on tomorrow's install 🤙
I really appreciate this video.
Looking for a 2007 - 2014 Honda RidgeLine Texas Edition with 3-4 Inch Lift Kit of Course + A Dully Back Set of Wheels. Can it be done? Texas Size Edition!!!
You should make a clip about the rear door checker mod. I've done it and it was easy
Hey love the 3" lift kit I wish I saw this lift kit before I installed my 2" lift. That might be a future mod I'd be looking into.
Would you be making a high clearance rock slider kit? Something like Jake Allen's friend, from Facebook, has built him?
Also a high clearance bumper kit like the SSO slimline hybrid stage 2 kits they have for tacomas. If that's even a possiblility with these frames. Something to improve the approach and departure with a light armor.
sorry I got confused at the beginning of the video. So I only care about ground clearance, but I don’t care about how things look. And preferably a little bit bigger tires. is the subframe lift what I want? being closer to factory geometry is important to me. I want it to be reliable.
Gald I found you!!! 2007 stock
I would love to know how to lock the VTM and use it at high speed.
When you flip the rear strut assemblies around so they are backwards, instead of swapping them left and right, the plastic feature at the bottom of the perch area ends up facing the wrong way (end of the coil). Inboard is outboard and vice versa. That's why there's a left and a right for the rear. It's probably better to swap left and right so that inboard stays inboard and outboard stays outboard.
Also why not have studs on the top of the front spacers?
Regarding other products, how about a steering wheel spacer, to bring it further back?
That is some good editing.
You ever have any issues with your ridgeline locking you out when its running? Loved this video!!!!
Wife and I bought a 04 CRV Ex last Tuesday and by Thursday I ordered your 2 inch lift kit w camber adjustment and I got it today in bc canada.This weekend ,guess I'am lifting a CRV .Your how too Videos make things so much easier thank you for your content #hondarescuegarage
Thank you for the kind words and we appreciate the support!
I have the 2 and half lift and the subframe but i still get a shake...
Wheels are balanced and alignment done to spec...
I need help with this...
I put a 2" front and rear lift on a 2012 Honda Ridegeline, and had the vehicle aligned. The vehicle immediately developed a shudder that starts at around 17mph and ends at about 20mph (the shudder seems to be happening only in the front of the car). The mechanic who did the work told me that he is concerned that the front axels might be stressed and that driving the car might cause damage to the axles and other expensive parts of the vehicle. Do you have any idea on what I might to do solve this problem?
Enjoyed the video - what are the make/model and specs for the rims and tires on this ridgeline.
I’m late to the conversation. My question is: how does the lift and larger tire and wheels affect the vehicles performance ? Or did you add performance to the vehicle.
Yeah I wanna know too
I have been looking for kickass roll bars for a 2013 ridgeline but theres NONE!! roll bars would be awesome.
Would love yhe same things to make this ablebtoo crawl with a JEEP WJ. Bo5h come unibody. Both jave 8.2/8.3 in ground clearance. Same soze wheels and tires. Then it ends. Would love a TC swap yhat wouldbgive Ridgeline owners 2wd, 4 hi part time. 4 full yime. And 4 low, beefier axles. Real lockers. Sliders,skid plates, LED bars,Winch BULL bar, and a good 2 inc suspension lift, and a 4 in and 6 inch long arm suspension lift so people can run 33's to 35's and gain more true ground clearance than 8.2 inches.
Fender flares would be needed for larger tires after body trimming i suspect so fender flares on the list as well..
Front and rear upgraded sway bars
Do a video of a 2003 honda pilot im waiting for my hrg oder and dont know much..
great video, it helped me a lot.
sorry, one more question how is this different from the 2 inch lift kits on Amazon? I’m assuming the Amazon ones are much farther from the factory geometry? Do those still increase ground clearance?
Would love to see a 2015 Honda Pilot lift kit.
Thanks it’s helping me out
Does this modification (in addition to the size of the tires) also affect gasoline consumption?
Where do you locate I need to lift K
Is the install similar to a Gen 2 Honda Pilot minus the rear shock? I ordered the 3" Ultimate lift. I rather save $$$ and DIY and add new power tools to my tool box.
This 3” lift on a 2010 Ridgeline…. Do you guys have wheel/tire recommendations?
Would love to see a pilot skid plate
Thsnks for this video. I have a Ridgline 2014 standard, and i would like to lift it but only a litle to have little more agresive shape...but i dont want a monstertruck or a full offroad beast. Only a eastethic literalmente higer. You can recommend some lifting kit as that?
Thanks again for you grear videos.
Will y'all be doing another lift kit giveaway?
Would this be similar for the pilot?
People act like these vehicles aren’t capable, but guess who pulled my uncle’s F150 out of a foot and a half of snow? Me and my stock Honda Ridgeline.
What’s the biggest tire you could run with the 3” lift?
pls make 3 inch lift kit for 2020 ridgeline
Hi awesome video, i have a 2017 Honda Ridgeline and want to lift it .do you make a kit for it?
What if you don't do the subframe kit with any negatives?
You absolutely cannot install a 3 inch kit without the subframe kit.
all our 3 inch kits or any kit that comes with a subframe kit you have to install the subframe kit FIRST.
you will not be able to install the lift components without doing the subframe kit first. If you did install the lift components without the subframe kit. the suspension geometry and CV axle angles would be un driveable.
Thank you for replying. I was waiting on your reply before I get one ordered thank you for the awesome as well.
Damn. I just bought the 2" lift kit awhile back and now it's to late to return it. I really want the 3" lift kit.
Can’t tell the difference! Just like your girl!
Enjoy your video thank you im from NYC. I have 09 honda crv ex awd been trying to look for lift making little clearance off the floor any suggestions I wanted to put little bigger tires make like off road look can you help me what should I get how hi can I go on on the lift please thank u been for 2 years now
Great video! 👍 Do you guys have anything like that for the 2006 Pilot ?
Yup just bought em 😅💪🏾💯💣
Great video thanks a lot
I want this lift kit for my ridgeline but you done ship to Nigeria so what do I do to get this kit
I don’t see how he installed the front struts. I can’t get the top bolt on the hub in. There’s a reason he doesn’t show the install.
Well done video.
This is a helpful video; HOWEVER this video leaves out some of the most difficult steps. For example, on the front wheels, this video completely skipped the hardest and most important step of this entire process - reinstalling the strut after putting on the spacer - definitely requires 2 people, and getting it aligned with the two big bolts on the wheel hub offers a lot of chance for f-ups. You can easily pull out your inner CV joint tripod and tear the inner CV boot if you aren't careful. Like I said, helpful video but do some additional research before trying this if you aren't experienced.
Please re-watch at 5:10
Any plans for rear windows molle for ridgeline? Or would the Elements version work?
So what do i need for more ground clearance 2006 Ridgeline? Since you said it doesn't give more clearance
Thats what my brother was asking cause he has a Ridgeline and needs clearance
I have 3 inch lift and spacer kit and confirm to you you still get more more ground clearance from the height of just having bigger tires.. what I'm saying is you have more ground clearance than stock id say 2" s more
Hey how about roof lights bar brakes. Can you make it to fit 52 inches light bar??
Love the video I would like to please have the link to order this please
Hello I was recently hir in my ridge line witch basically ripped off my rear bumper is there any kind of tube bumper or something I can replace it with that will still look good without the bumper cover on
Not easy when your ridgeline has a lil rust, doing mine now and got stuck on the rear subframe bolts stuck
how about a 2012-2016 CRV 3-inch lift ?
We have one! www.hrgengineering.com/product-page/3-inch-ultimate-lift-kit-for-2007-2016-honda-cr-v
3 years late, but that lower control arm bushing was torn in the video
I have a 2006 honda ridgeline rtl and I noticed they dont make a light bar mount for the ridgeline I had mines custom make if u like to see it I can send pics I'm also interested in the 3in lift and I dont confident enough to do it my self I'm will to by the whole kit and drive there to have u install it and u can even film it please let me know thx
Chris