Magsafe Connector Pins Repair
HTML-код
- Опубликовано: 30 июл 2024
- Magsafe connector pins may become stuck in the connector itself and prevent your magsafe charger from charging your macbook.
Here is a simple video showing how to troubleshoot magsafe connector pin issues and solve them.
Happy charging! 
Хобби
Thank you sooooo much. It's really working ❤ you saved me buddy 🔥🔥🔥
you are welcome! kindly subscribe, like and share!
MacBook Pro shuts off when I plug in the charger?
Basically what happens is I plug the charger into the MacBook Pro while it is on, and once the charger is plugged in, the Mac shuts off. I can turn it on just fine while the charger is already in the Mac, but plugging it in while the Mac is on just shuts it off. Don't know what is causing this issue. I went to a Mac specialist and he said that he had never seen this issue before, and to send it in for diagnostics, but I currently don't have the money for that. Any help would be appreciated. Thanks
Really helpful, thanks
you are welcome! kindly subscribe to the channel, like and share the videos!
The real useful video.....
thank you! kindly subscribe like and share!
Fantastic
thanks! subscribe and share!!
thank you so much you saved my life getting killed or whipped my my mother this is the third macbook charger i broked on accident
glad it helped!!!
my new magsafe will only work when the magsafe is covering up the ethernet port but when turned the other way it will not work. Is it the macbook or magsafe that's the problem?
Hi Matt. It may be because of various reasons:
First check if there is any foreign object stuck at the charging port of the MacBook. It may be that there is a magnetic object which was "picked" up by the macbook and is blocking the connector from making full and flush connection.
Secondly, check if all the pins in the connector come fully up/out when depressed and released (and that all are at the same height).
Third, check if your MacBook has any dents on the casing, especially around the charging port. This may prevent the connector pins from reaching the contact points on the macbook.
Fourth, check if the magsafe connector is bent at any point along its length.
Fifth, if the magsafe connector is covering up the ethernet port, are both the 2 LED lights working? Or is it working on only one side. If its working on only one side, then most probably, it's the connector that is the issue.
As a last resort, you can also try using another magsafe charger and see if you experience the same issues..
Do these steps help?
Hey bro I have an issue but not the middle pin the one right next to it it’s completely stuck down any fix for that.
hi. thanks for reaching out. have you tried cleaning with a firm brush? if it's still stuck, then the spring underneath the pin is spoilt. You may need to change the connector/repair the cable. kindly go into my channel and watch videos on magsafe cable repair........
...and subscribe too!
here are the video links:
ruclips.net/video/I38DKSKyEJA/видео.html
here is another:
ruclips.net/video/cho4a7qvfiU/видео.html
heres another:
ruclips.net/video/LH7-rV4UecY/видео.html
My mettalic part wouldn't come out... Sunken middle pin
I have a Mac a1369 and I connect my charger the green light comes on for a split second and then it goes of but on the screen it shows the lighting bar on battery like if it was charging but no charge. Could it be my charger or the I/O board.??plz help
hi Jose. Sorry for this. kindly Try the following steps:
-turn off the MacBook
-Hold down SHIFT +CTRL+ALT+POWER buttons for 10 seconds
-Release the keys after 10 seconds
-Press the power button to power on the Mac book
is there any difference?
@@reachtech1 just tried that and it still does the same thing..
Hi Jose. Did you hold all the four buttons down together? If not, kindly repeat the steps.
Also the charger could be the problem, try with another charger and see if there's any difference...
Revert with results..
also make sure that all the pins are at the same level. i.e. non is sunken...
@@reachtech1 pins look the same good. Maybe it’s a bad charger.
Hi sir my port show green light but dim or blink when it . if press the port hard it charges
kindly repost...'can't seem to get your question....
How do you test it directly
hi. kindly explain your question. i dont seem to understand it..i'll be glad to help.
Hi sir my problem is the head of the mag safe charger get loose and get stuck on the mac 💻 book and gets off the charger any help?
also comment, like dnnsshrare
hi. send me an email at richbi2020@gmail.com
Any tips on how to remove the metal part? i can't remove mine
place a piece of (thin) cloth over the metal contact- this is to protect it from the jaws of the pliers you'll use to pull it out. Hold it firmly with between the jaws of a pair of pliers. pull from side to side -leveraging on the aluminium casing, until the metal contact comes off.....
subscribe, like and share!!
Hey is there an easier method to use to remove the metal part?
aparentemente, todos los videos olvidan contar esta parte!
@@lunacabutti yo se, verdad
hi. the metalic part is stuck really fast on the connector, you need something that can pull it out firmly. pliers will do.
Hi sir where are you in the world I’m in Kenya maybe I can bring you my charger you repair for me for some money? Please? And this is a big problem maybe you also can upload a video
Hi. Send me an email through richbi2020@gmail.com
Hi.. i think i shot my pins... What can I do
Hi Mary! Sorry for the short. If the plastic between the pins melted during the short, then it is likely you can salvage the pins by carefully scrapping the plastic between them and releasing them to spring back again. A pointed razor and pin will be needed.
Try this and lets know how it goes!
Your voice is so quiet I have to turn the volume up, and then you blast my ears with the music. PLEASE match the volume of the music at the start and end to the volume of your voice.
hi noted! Thank you!
hi Mandolinic, check this latest video and tell me what you think.....ruclips.net/video/hrLAlOCWzRY/видео.html