Hi Stuart, based on your review I purchased these via EBay for $32 delivered to Australia. Fitted without issue to my 2013 Triumph Scrambler they have improved daytime visibility enormously. The spec H4 halogen bulb was a dull pale yellow and didn’t inspire any confidence in daylight conditions. This new LED is not only much brighter but the light an intense white that really stands out. Many thanks, Rick
The standard light is horrific so glad I found this video. I need to right with full beam on constantly on unlit roads and still can't see far enough to go 60mph+
Well this will be just the job for me, as there being two in the box, I can use them on my T120 (same as yours), and on my Thruxton R. as you say, its a no brainer! cheers, Dave
Thanks for another great video... I personally had a couple problems I did not expect (but so far seems I am the only one)... I actually had a problem getting the lamp piece removed, first because it seemed to stick or hang on the "tab" at the top and just to the left that hooks it in place (even while trying to pull the bottom out first and lift slightly up on it, and every other combo I could think of), the second was that my running light cable was so short (it was stretched tight no matter how I tried to position the lamp) that I had a really hard time both supporting the lamp and getting my hand in there to release the connector (there is a little tab thingy on it to help lock it in place)... wouldn't have hurt to have a couple cm more to work with. Then when I was remounting the lamp I lightly scratched the "bowl" because I shifted to the left a little while trying to get the wires in place and there is a gap between the lamp housing and the housing screw holder that lines up with the hole in the side of the bowl and it was possible to accidentally slip it in over the outside of the bowl, scratching it). Once I did get it in place, it was also tighter than I expected despite pushing the connector into the hole in the back of the bowl. Despite all that, I like the headlight and look forward to trying it out properly soon :).
That was an excellent presentation on this topic. bravo you just got a new subscriber. however as far as the C6's are concerned a lot of Amazon reviewers are complaining about poor quality and short life.
Looks like a nice mod even for my 1981 BMW with actual glass but with a weak charging system. I've already changed the taillight to LED to lighten the load. In marginal weather having to choose between heated vest/gloves and headlight isn't a fun choice.
Just received mine. I ordered the same one you installed through Amazon Canada. We do not have the daytime running lights here, we are on automatic low beam all the time on our motorcycles, however, you can see the DRL’s are in fact on and when I lost my light on the second month they were all I had to light the way home. The colour temp of the halogen always bothered me as well. Makes no sense to me that they use two different technologies in the head lamp. Thanks for the video and blazing the trail.
Sheldon, I'm in Canada too and have a T120. Did you have any problem with your highbeam switch not working? I haven't tried these bulbs but just trying to replace my Halogen bulb has been a pain. All the bulbs I've tried, H4 60/55w 12v, turn on automatically once they are connected and the high beam swicth doesn't do anything at all. I can't tell if they're stuck in high beam or low.
They must of come along way in technology because I remember buy led globes for my car and as I drove to work the bloody things were bright to look at but didn’t project any light at all great Video Stuart but I would need to see it in driving conditions to be convinced kind regards Phil
Stuart, any chance of a follow up vid to this one, involving a short night blast along an unlit road to properly evaluate the effectiveness of this unit.....as I think this is the answer to my prayers. Pete
Great Video. Ive just replaced mine with an Osram. Only isse that i found out later was that somehow the headlight and low light got switched. When i put DRL, the headlight comes on and vice versa
as far as an MOT tester is concerned Tony his job is to see if it works and if the light is properly adjusted. He has no authority to think beyond that!
The high beam on my 2018 bonneville are borderline dangerous if you wanted to use them for the highway. This upgrade is a necessity especially if you need to drive on the highway at night
Did you install this and did it help your high beam situation? Assuming it is the same as mine... basically turns into a black hole with light thrown out to all sides but not where you need it on the road...
Thank you, Stuart for a spot on how-to. I immediately went to the amazon link and ordered the exact bulbs you specified. I do believe the fan is there more to circulate air through the driver housing at the back of the led unit to cool it, rather than the bulb itself. This is the one part of an led that will build some heat, similar to a ballast in a fluorescent light fixture. Still nowhere near the heat of a halogen. Do you have any concerns without the rubber headlight boot causing moisture to be caught in the headlamp during a wet ride, possibly causing damage to the reflector? I try not to ride in much rain, but as you know too well it does happen! Thanks for all you do.
Re the fan chad I concur! no not too concerned about the rubber boot, there is no evidence that any water has ever got into the headlamp shell so I dont think it will be an issue! but only time will tell!
Another excellent video. I'll be curious to see how well it holds up over time. I've tried several different LED headlamp solutions in the past but none lasted more than a few months.
stuart fillingham Well, at that price and since it includes a one year warranty I went ahead and ordered one. Worth a try and I’m already proven to be a sucker for new ‘essentials’ for my Bonnie 😉
Thanks for the great video, but the bulbs coming up in your link are not the same as the ones in the video. In fact, they are car bulbs, and don't have the light pattern 'fins' that yours do. I'm looking for the best headlight upgrade for my Interceptor 650 - either LED bulb, or full LED Unit. Any suggestions?
Hi Stuart , I enjoy your videos very much, You have fitted a lot of aftermarket goodies, but I keep looking for engine crash bars, have you fitted one or will you be fitting one in the future
Hi Stuart. Just about to collect my T120 and fancy trying these LED’s. Are you able to refresh the Amazon link as the current one takes me to a replacement headlight. Thanks
In my opinion, it's not so much heat that ends the dreaded plastic headlight lens but UV rays. It's all about money that changed glass lenses to plastics.
Good day Stuart.. I have already fitted led lights in my car and there was 1 thing that was very different between my lights (night eye H4) with your lights. My frame could be twisted of., (the H4 mounting plate.) This means that you could fit your back light rubber (if you would make a little hole in de rubber where the 3 slots are.) is that also something that is possible with your lights?
unfortunately not sander, I had a good look and there is no way to do it im afraid, but as I said these are budget lights, maybe yours are more upmarket!
I clicked the link to find the led bulbs shown in this video. It took me to Amazon but the bulb was different than the one shown. Also I could not find the exact same bulbs in video anywhere else. So does anybody know where I can find c6s bulb in video?
There seem to be a number of manufacturers of LED replacement bulbs, some which are represented to have more lumens than the brand you reviewed. Did you consider other brands in recommending this one?
Hi Jim, im afraid higher power is not always a good thing, These are DOT approved many of the higher power ones are not! I do need to consider other road users, and blinding them with a hyper powerful beam of light is potentially dangerous! i also need to think about possible repercussions from local law enforcement should they consider the light to be too bright.
stuart fillingham So the implication is that 3200LM is the “sweet spot” for bulb brightness? I have no clue, just a lot of choices (too many), lots of discussion (I.e. www.thetriumphforum.com/threads/t120-led-light-replacement.10872/) and I would like to just lazily defer to you... as the T120 GOD.
Hi Jim I tend to stay away from the triumph forum as I dont like arguing! im not saying 3200 lumens represents the sweet spot I just think that from experience with led flashlights it is plenty powerful enough! 2000 is in fact sufficient but that option wasn't available to me. for what they cost if you would like to try more powerful options let me know how you get on!
Hey Stuart. My headlamp has just stopped working in the dip beam setting. Daytime running light and high beam settings are still working though. I'm looking for a replacement so I'm wondering if the bulb you installed in this video over a year ago is still going strong?
@@stuartfillingham7011 Ah well. After a bit of searching I can't seem to find them anywhere though. I'll have to look for a similar all-LED one. Thanks for the reply!
@@stuartfillingham7011 Ended up placing an order for the same stock bulb. Long working hours right now and little time to research, but I still want to be able to ride the bike after sunset so I went with "the evil I know". Still, thank you for the tip. I'll keep the Auxbeams in mind in case the new bulb gives up the ghost. Are you planning on making a video about them?
@@stuartfillingham7011 Hi Stuert ... how is auxbeam performing ? I am thinking of upgrading my headlight. Shortlisted ones are Cyclops h4 Auxbeam h4 Glowteck h4
Hey Stu. How a is this bulb running now since it’s been what, over a year since you installed it? I am interested in getting them but wanted to see how they’re running. Thanks
stuart fillingham that’s great to hear. Now, the link you included seems to have changed because it takes you to a completely different product. I tried looking for the bulb on my own in amazon but BOY there’s a lot out there. Which one exactly did you fit to your bike??? Thanks Stu
Hi Stuart, based on your review I purchased these via EBay for $32 delivered to Australia. Fitted without issue to my 2013 Triumph Scrambler they have improved daytime visibility enormously. The spec H4 halogen bulb was a dull pale yellow and didn’t inspire any confidence in daylight conditions. This new LED is not only much brighter but the light an intense white that really stands out. Many thanks, Rick
Hi Richard, its funny I was only talking to someone about the very same thing today! thanks for your comment!
Excelent stuff. Thanks for bringing this to us. I’d love to see what they look like at night out on the road.
Thank you sir, ill see what I can do in the future!
This video brightened my day, thanks.
lol! was it illuminating?
thanks for the detailed video and the temperature readings :)
The standard light is horrific so glad I found this video. I need to right with full beam on constantly on unlit roads and still can't see far enough to go 60mph+
They look like quality items & seem to do a good job 👍🏻
Thank you for the video, well detailed and liking the narration
Thank you for another thorough video review!
Your most welcome sir!
Pro trick: you can watch series on flixzone. I've been using it for watching all kinds of movies recently.
@Maverick Hamza Definitely, have been watching on Flixzone} for months myself :)
Thanks Stuart for another excellent video.
your welcome Robert!
Well this will be just the job for me, as there being two in the box, I can use them on my T120 (same as yours), and on my Thruxton R. as you say, its a no brainer! cheers, Dave
Cheers Dave!
Thanks for another great video...
I personally had a couple problems I did not expect (but so far seems I am the only one)... I actually had a problem getting the lamp piece removed, first because it seemed to stick or hang on the "tab" at the top and just to the left that hooks it in place (even while trying to pull the bottom out first and lift slightly up on it, and every other combo I could think of), the second was that my running light cable was so short (it was stretched tight no matter how I tried to position the lamp) that I had a really hard time both supporting the lamp and getting my hand in there to release the connector (there is a little tab thingy on it to help lock it in place)... wouldn't have hurt to have a couple cm more to work with.
Then when I was remounting the lamp I lightly scratched the "bowl" because I shifted to the left a little while trying to get the wires in place and there is a gap between the lamp housing and the housing screw holder that lines up with the hole in the side of the bowl and it was possible to accidentally slip it in over the outside of the bowl, scratching it). Once I did get it in place, it was also tighter than I expected despite pushing the connector into the hole in the back of the bowl.
Despite all that, I like the headlight and look forward to trying it out properly soon :).
That was an excellent presentation on this topic. bravo you just got a new subscriber. however as far as the C6's are concerned a lot of Amazon reviewers are complaining about poor quality and short life.
been looking to upgrading my light to one of these, thanks for the info !
Another good review Stuart, I'm hoping they will fit in my 1995 Triumph thunderbird 🤞
Looks like a nice mod even for my 1981 BMW with actual glass but with a weak charging system. I've already changed the taillight to LED to lighten the load. In marginal weather having to choose between heated vest/gloves and headlight isn't a fun choice.
Edward Jones I was thinking the same thing for my airhead!
Just received mine. I ordered the same one you installed through Amazon Canada. We do not have the daytime running lights here, we are on automatic low beam all the time on our motorcycles, however, you can see the DRL’s are in fact on and when I lost my light on the second month they were all I had to light the way home. The colour temp of the halogen always bothered me as well. Makes no sense to me that they use two different technologies in the head lamp. Thanks for the video and blazing the trail.
Sheldon, I'm in Canada too and have a T120. Did you have any problem with your highbeam switch not working? I haven't tried these bulbs but just trying to replace my Halogen bulb has been a pain. All the bulbs I've tried, H4 60/55w 12v, turn on automatically once they are connected and the high beam swicth doesn't do anything at all. I can't tell if they're stuck in high beam or low.
Great vid, as always. One thing: it's "so many" Kelvin, without the "degrees".
They must of come along way in technology because I remember buy led globes for my car and as I drove to work the bloody things were bright to look at but didn’t project any light at all great Video Stuart but I would need to see it in driving conditions to be convinced kind regards Phil
Hi Phil yeah I think they've come along in leaps and bounds even in the last year or so!
Stuart, any chance of a follow up vid to this one, involving a short night blast along an unlit road to properly evaluate the effectiveness of this unit.....as I think this is the answer to my prayers.
Pete
Ill do it when I can Peter, heavy workload and light nights make it difficult at the moment.
Great Video. Ive just replaced mine with an Osram. Only isse that i found out later was that somehow the headlight and low light got switched. When i put DRL, the headlight comes on and vice versa
Thanks Stuart, I’d be interested to find out what the MOT testers think, or did I miss it !
as far as an MOT tester is concerned Tony his job is to see if it works and if the light is properly adjusted. He has no authority to think beyond that!
The high beam on my 2018 bonneville are borderline dangerous if you wanted to use them for the highway. This upgrade is a necessity especially if you need to drive on the highway at night
Did you install this and did it help your high beam situation? Assuming it is the same as mine... basically turns into a black hole with light thrown out to all sides but not where you need it on the road...
@@Rob801 no i couldn't muster up the funds needed to buy this upgrade.
Shocked at how poor the lights are on my Speed Twin,for a modern motorcycle. On par with a 70's T140! Going to invest in this upgrade 👍.
The upgrade worked great heaps more light got the led's of ebay
Nice upgrade
Thank you, Stuart for a spot on how-to. I immediately went to the amazon link and ordered the exact bulbs you specified. I do believe the fan is there more to circulate air through the driver housing at the back of the led unit to cool it, rather than the bulb itself. This is the one part of an led that will build some heat, similar to a ballast in a fluorescent light fixture. Still nowhere near the heat of a halogen. Do you have any concerns without the rubber headlight boot causing moisture to be caught in the headlamp during a wet ride, possibly causing damage to the reflector? I try not to ride in much rain, but as you know too well it does happen! Thanks for all you do.
Re the fan chad I concur! no not too concerned about the rubber boot, there is no evidence that any water has ever got into the headlamp shell so I dont think it will be an issue! but only time will tell!
@@stuartfillingham hey Stuart. Have you had any issues not running that boot in the years that followed?
Thank you Stuart. For my Triumph Bobber, I have a parking light, too. What would I do with this light / wires? Thanks. Great videos!
@stuart fillingham
Hi stuart. Can I ask you if with this solution the original led bar in the headlight still works or not? Thank you
Another excellent video. I'll be curious to see how well it holds up over time. I've tried several different LED headlamp solutions in the past but none lasted more than a few months.
me too scot will be interested to see how they hold up!
stuart fillingham Well, at that price and since it includes a one year warranty I went ahead and ordered one. Worth a try and I’m already proven to be a sucker for new ‘essentials’ for my Bonnie 😉
Thanks for the great video, but the bulbs coming up in your link are not the same as the ones in the video. In fact, they are car bulbs, and don't have the light pattern 'fins' that yours do. I'm looking for the best headlight upgrade for my Interceptor 650 - either LED bulb, or full LED Unit. Any suggestions?
Hi Stuart , I enjoy your videos very much, You have fitted a lot of aftermarket goodies, but I keep looking for engine crash bars, have you fitted one or will you be fitting one in the future
Just purchased this for my Thruxton
Hi Stuart. Just about to collect my T120 and fancy trying these LED’s. Are you able to refresh the Amazon link as the current one takes me to a replacement headlight.
Thanks
Seems the bulb can't be replaced in the smaller 2024 Triumph Bobber headlight.
In my opinion, it's not so much heat that ends the dreaded plastic headlight lens but UV rays. It's all about money that changed glass lenses to plastics.
They make motorcycle specific led headlights with the fan on the tip instead so it all fits easy
Good day Stuart.. I have already fitted led lights in my car and there was 1 thing that was very different between my lights (night eye H4) with your lights. My frame could be twisted of., (the H4 mounting plate.) This means that you could fit your back light rubber (if you would make a little hole in de rubber where the 3 slots are.) is that also something that is possible with your lights?
unfortunately not sander, I had a good look and there is no way to do it im afraid, but as I said these are budget lights, maybe yours are more upmarket!
Can I fit this particular headlight assembly GT or interceptor? Not only bulb the whole headlight unit
Hi Stuart. Sorry I'm sure you've answered a million times but what indicators do you have? They are awesome
Apologies - late to the conversation - would this be the same for a 2018 speedmaster?
y en motos nuevas no pierde la garantia por el cambio del bombillo?
Hi friend. which headlight is this, with DRL ?
Installed on the liquid-cooled Bonneville? Can't remember which model you have. I'd like to upgrade my 2018 T120 to LED.
Hi Stuart I have a water cooled T100 did you try fitting this unit to this bike.
Is there a problem if the dust cover is not put back on? Thanks
If the cost is similar why don’t Triumph put led in as standard?
Did you test them whilst riding in the dark Stuart?
Very helpful, thanks
fitted to my bonne work great
I clicked the link to find the led bulbs shown in this video. It took me to Amazon but the bulb was different than the one shown. Also I could not find the exact same bulbs in video anywhere else. So does anybody know where I can find c6s bulb in video?
There seem to be a number of manufacturers of LED replacement bulbs, some which are represented to have more lumens than the brand you reviewed. Did you consider other brands in recommending this one?
Hi Jim, im afraid higher power is not always a good thing, These are DOT approved many of the higher power ones are not! I do need to consider other road users, and blinding them with a hyper powerful beam of light is potentially dangerous! i also need to think about possible repercussions from local law enforcement should they consider the light to be too bright.
stuart fillingham So the implication is that 3200LM is the “sweet spot” for bulb brightness? I have no clue, just a lot of choices (too many), lots of discussion (I.e. www.thetriumphforum.com/threads/t120-led-light-replacement.10872/) and I would like to just lazily defer to you... as the T120 GOD.
Hi Jim I tend to stay away from the triumph forum as I dont like arguing! im not saying 3200 lumens represents the sweet spot I just think that from experience with led flashlights it is plenty powerful enough! 2000 is in fact sufficient but that option wasn't available to me. for what they cost if you would like to try more powerful options let me know how you get on!
Hmmm amazon doesn’t ship to Australia 🇦🇺
can get the same light on ebay just got them have fitted them work well
Hey Stuart. Are you still enjoying this headlight? I'm looking to upgrade and checking my options.
yeah its never missed a beat Steve!
Sir.. Is it suitable for my royal Enfield Bullet..
Hey Stuart. My headlamp has just stopped working in the dip beam setting. Daytime running light and high beam settings are still working though. I'm looking for a replacement so I'm wondering if the bulb you installed in this video over a year ago is still going strong?
Yep no problems at jorge, I I run it whenever I ride the bike.
@@stuartfillingham7011 Ah well. After a bit of searching I can't seem to find them anywhere though. I'll have to look for a similar all-LED one. Thanks for the reply!
@@Gaius0 try one of the auxbeam h4 lights I'm testing one now and it actually seems better.
@@stuartfillingham7011 Ended up placing an order for the same stock bulb. Long working hours right now and little time to research, but I still want to be able to ride the bike after sunset so I went with "the evil I know". Still, thank you for the tip.
I'll keep the Auxbeams in mind in case the new bulb gives up the ghost. Are you planning on making a video about them?
@@stuartfillingham7011 Hi Stuert ... how is auxbeam performing ?
I am thinking of upgrading my headlight.
Shortlisted ones are
Cyclops h4
Auxbeam h4
Glowteck h4
Hey Stu. How a is this bulb running now since it’s been what, over a year since you installed it? I am interested in getting them but wanted to see how they’re running. Thanks
absolutely fine!
stuart fillingham that’s great to hear. Now, the link you included seems to have changed because it takes you to a completely different product. I tried looking for the bulb on my own in amazon but BOY there’s a lot out there. Which one exactly did you fit to your bike??? Thanks Stu
Will these bulbs fit the T100?
Please let me know if this would work on T 100 - 2015?
i dont see why not sir, you may have to rearrange the wiring in the head lamp bowl to accommodate it though!
Thanks, also could you suggest some nice Silencers for T100. Whats your take on Dunstall Exhaust?
Hi Stewart I have just received my bulbs but they are 36w 3800lm could you tell me if they are ok for my t100 2020
if they fit they should be ok!
They do thank so much for your time and the information you provided.
Please can you give me the adress to order the c6s led lamp
Has anyone successfully fitted this bulb to an air-cooled model?