Making Aircraft Fairings
HTML-код
- Опубликовано: 3 окт 2024
- Wow 100 episodes so far on the Zenith CH-750 Super Duty build. I wonder what the final count will be when I make the last building video?
In today's video Len and I are making a fairing that goes around the bottom of the windshield. It consists of two layers of glass cloth.
I am far from an expert on working with fiberglass (luckily for me Len is a master at it!). Although I'm not expert it really is fun and easy to make a fairing. Give it a try if you want to dress up your airplane!
PRODUCTS I'VE USED AND RECOMMEND:
Hobby Saw: amzn.to/3TCOdXs
3/8" reamer: amzn.to/38Dxth2
USB Charger: amzn.to/2VWxBSB
Park Brake Clamp: www.aircraftsp...
Dynon D3: dynonavionics....
Tape: amzn.to/2TzU32s
Adel Clamps: amzn.to/3ztVsI0
Snap Bushing (you NEED these): amzn.to/3gryDfm
Dremel Flap Wheel: amzn.to/3ztmXle
Air Hose: amzn.to/3wrqezA
Air Hose Fittings: amzn.to/3iIf2dB
Paint Gun (works GREAT for smaller parts): amzn.to/3vqDgMa
Air Filter for Paint Gun: amzn.to/3iHhfX2
USB Data Port (for Dynon): amzn.to/3iLsiOL
My Microphone: amzn.to/35likMa
Paint Mix Cups: amzn.to/2RSM4gc
Fly Cutter (for fuel sender): amzn.to/3gvgXzO
#zenithsuperduty #kitplane #zenithaircraft - Авто/Мото
The issue with stretching the fabric can be addressed by carefully rolling it up and then unrolling it onto the resin.
Your attention to detail and passion for your craft is extremely inspiring man! love your channel! thank you for taking the time to film your work and thank you for sharing it with us all!
Nice work. Could you brush the micro on after the layup has just started to firm up so it could cure all at the same time as layup? Clear packing tape works great by itself as a release and since it's super thin doesn't leave much ridge at joints.
Just another tip, your local HobbyLobby or other fabric shop will have Dacron, or Dacron - like, fabric for cheap. It’s also thinner / lighter and conforms to curves ( lays down) easier than the “heavy” covering material I think you’re using. Also for long strips of glass, simply loosely roll it up after you cut in on the bias. Then unroll onto the part - helps keep distortion to a minimum. Also, stores better for the next job.
A near by neighbor who I meet thorough the local EAA chapter, is building a 701 and told me about this channel. I have been racing cars and making them as well and I make fiberglass from raw materials for bodywork. I noticed a previous post and I liked it since packing tape is an excellent way to cover a surface since resin will not adhere to it. It is made of poly vinyl chloride which is the main ingredient in PVA release agent.
Also I am curious why your resin is so dark brown? Is it old resin? Stuff that is aging will get a darker brown as it ages and new resin is usually clear or nearly clear and close to the viscosity of water.
Also since you have a sweater and ski cap on, is it cool in your hangar? I hope you know that polyester resin will not set up as quickly depending on the temperature and humidity you are working in as well as the amount of hardener you add.
Good video!
Ed
Ummm. Perhaps you could try some mold release wax (Partall Paste Wax #2) and some PVA (spray on)? Duct tape and Vaseline just seems... wrong?
Hmmm... "seems" wrong, yet gets perfect results every time...
@@KitplaneEnthusiast ...and it's dirt cheap, and it's already in your shop.
Yep, I'd use packing tape and wax, it's thinner and you'll have less lines in the glass product when done. Peel ply underneath doesn't make sense to me either as it is just increasing the thickness of the base and making more finish work to be done later.
I'm curious why you don't mix the chemicals at the fuselage? Thats sure to give you some time... Any Whoo, you guys do really nice detailed work. 10:00 can you imagine if you had to fabricate that pannel by aluminum instead of fiberglass..
That would certainly be easier! The resin is kept in a heated cabinet in Len's hangar. It's also mixed with special measuring pumps that aren't really portable. So, we have to mix it at his house, and then rush to my house!
hello there you are by far the best video maker nice and clear commentary is totally awesome Thanks
Well done! The resin dash in this weather, albeit in a warmed foam cooler perhaps, is a new complication.
Hi Mark. What weight of glass cloth did you use here. Thank you
@@generalcanby5847 It’s been a while since I’ve purchased it but I believe it is 8oz.
Thanks, Mark. That's a very useful video to refer back to when I have to make wing root fairings for my Kitfox. What specific glass fabric and resin system did you use?
The resin is from EZ Poxy.
G,day Mark from Sydney Australia.
When you say 'peel ply' are you you referring to fibre glass Mat?
🛩️🌏
No the peel ply is different that the fiberglass. Peel ply is just aircraft fabric. It's the same material that something like a Piper cub, or my Pitts is covered with.
So what is “fairing” never heard of that word
Excellent.
This demonstration is filled with very helpful information on how to make a fairing with resin and fibreglass. Thanks for the well-done video.